Y-pipe just installed and IT'S TERRIBLE!!! HELP!
#1
Y-pipe just installed and IT'S TERRIBLE!!! HELP!
I finally went to Midas and they put on my Cattman Y-pipe, and it makes so much noise and vibration!!
I have an automatic, Apex'i exhaust, RT cat and K&N cone. At idle, my whole car shakes and vibrates! All the coins in my change thing and cupholder rattle like crazy and the sterring wheel shakes. When I go slow (5 mph) the sound is an inconsistent gurgling then quites down as the revs get higher. At 40 mph and 1500 rpms, the car is deffing and teh dash starts vibrating and rattling!!!
Dudes, I need help! What's going on? Are all the y-pipes like this?? I don't like it at all. Any help or explanations would be greatly appreciated as I am ****ed off!!!
I have an automatic, Apex'i exhaust, RT cat and K&N cone. At idle, my whole car shakes and vibrates! All the coins in my change thing and cupholder rattle like crazy and the sterring wheel shakes. When I go slow (5 mph) the sound is an inconsistent gurgling then quites down as the revs get higher. At 40 mph and 1500 rpms, the car is deffing and teh dash starts vibrating and rattling!!!
Dudes, I need help! What's going on? Are all the y-pipes like this?? I don't like it at all. Any help or explanations would be greatly appreciated as I am ****ed off!!!
#3
Originally posted by SprintMax
its the cat bracket causing the noise.. you have to put bushings between the cat bracket and the body or wedge it over.. have the muffler shop do that..
its the cat bracket causing the noise.. you have to put bushings between the cat bracket and the body or wedge it over.. have the muffler shop do that..
#5
Originally posted by Str8ridin
is that causing the vibration too?
is that causing the vibration too?
#8
#10
Originally posted by SprintMax
here are some good readings..
http://forums.maxima.org/search.php?...der=descending
here are some good readings..
http://forums.maxima.org/search.php?...der=descending
thanks guys and sprintmax...
#13
Originally posted by Str8ridin
Also, one more thing....has anybody experienced that kind of vibration...I mean the steering wheel shakes like crazy.....and the car just vibrates and feels like a train is going overhead?
Also, one more thing....has anybody experienced that kind of vibration...I mean the steering wheel shakes like crazy.....and the car just vibrates and feels like a train is going overhead?
#15
Originally posted by Craig Mack
yes. Get it checked as soon as u can, its not the pipe, or maybe it is cause Cattman has been known for fitment issues.
yes. Get it checked as soon as u can, its not the pipe, or maybe it is cause Cattman has been known for fitment issues.
#16
Originally posted by 95emeraldgxe
dunt sweat it......its not like your car is gonan explode....but yor mistake was taking it to midas.....you should have taken it to a private place
dunt sweat it......its not like your car is gonan explode....but yor mistake was taking it to midas.....you should have taken it to a private place
it's just frustrating because I've been waiting 3 months for this thing and reading just good things about the pipe and when I finally put it on, it's nothing like what I thought...
#17
Originally posted by Str8ridin
I hear ya...but suprisingly, they had the cheapest price...which was probably my first mistake.
it's just frustrating because I've been waiting 3 months for this thing and reading just good things about the pipe and when I finally put it on, it's nothing like what I thought...
I hear ya...but suprisingly, they had the cheapest price...which was probably my first mistake.
it's just frustrating because I've been waiting 3 months for this thing and reading just good things about the pipe and when I finally put it on, it's nothing like what I thought...
My WSP mandrel bent aluminuzed Y (that is lighter than Stainless steel), will fit perfectly with the new gaskets it came with, and I will FEEL the gains with a cool sound and I will be one happy camper.
O yea sorry about your issues str8ridin'
#18
Originally posted by Craig Mack
My prediction:
My WSP mandrel bent aluminuzed Y (that is lighter than Stainless steel), will fit perfectly with the new gaskets it came with, and I will FEEL the gains with a cool sound and I will be one happy camper.
O yea sorry about your issues str8ridin'
My prediction:
My WSP mandrel bent aluminuzed Y (that is lighter than Stainless steel), will fit perfectly with the new gaskets it came with, and I will FEEL the gains with a cool sound and I will be one happy camper.
O yea sorry about your issues str8ridin'
#19
Originally posted by Str8ridin
Also, one more thing....has anybody experienced that kind of vibration...I mean the steering wheel shakes like crazy.....and the car just vibrates and feels like a train is going overhead?
Also, one more thing....has anybody experienced that kind of vibration...I mean the steering wheel shakes like crazy.....and the car just vibrates and feels like a train is going overhead?
#20
Originally posted by Str8ridin
I hear ya...but suprisingly, they had the cheapest price...which was probably my first mistake.
it's just frustrating because I've been waiting 3 months for this thing and reading just good things about the pipe and when I finally put it on, it's nothing like what I thought...
I hear ya...but suprisingly, they had the cheapest price...which was probably my first mistake.
it's just frustrating because I've been waiting 3 months for this thing and reading just good things about the pipe and when I finally put it on, it's nothing like what I thought...
#22
Originally posted by Craig Mack
Thanks. Are you auto or manual ?
Surely you felt the gains, right ? Or was the rattling to overbaring?
Thanks. Are you auto or manual ?
Surely you felt the gains, right ? Or was the rattling to overbaring?
I'm auto!
#23
Originally posted by SprintMax
doesn't matter where you take it.. same problem will arise.. now its not why the problem arose.. its how to fix it..
doesn't matter where you take it.. same problem will arise.. now its not why the problem arose.. its how to fix it..
#25
my cattman y-pipe did this too.
if there is a huge vibration, it's probably touching the k-member.
It's probably the fitment... trust me... I went through what you just went through.
don't waste you money on the installation blah blah...
have the shop check it once more to see if the y-pipe is touching anything.
mine got taken off and ready to ship to cattman again for them to fix.
I can give you pictures in a minute. hold up
if there is a huge vibration, it's probably touching the k-member.
It's probably the fitment... trust me... I went through what you just went through.
don't waste you money on the installation blah blah...
have the shop check it once more to see if the y-pipe is touching anything.
mine got taken off and ready to ship to cattman again for them to fix.
I can give you pictures in a minute. hold up
#26
http://www.geocities.com/rokclan/sexima/Y-pipe.jpg
you see the black spot inside the circle? it was toucing the k member.
the big black bar under the car.
you see the black spot inside the circle? it was toucing the k member.
the big black bar under the car.
#27
Originally posted by SprintMax
its the cat bracket causing the noise.. you have to put bushings between the cat bracket and the body or wedge it over.. have the muffler shop do that..
its the cat bracket causing the noise.. you have to put bushings between the cat bracket and the body or wedge it over.. have the muffler shop do that..
#28
Wow, this thread is making me a little apprehensive when it comes to getting a y-pipe. That was going to be one of my next mods, now I don't know. Unless I know for sure what to look out for and what HAS to be done when it's installed.
#29
i have the same fukin problem! i hate this ******* y-pipe. ok maybe im exaggerating. my problem doesnt seem as bad as yours though. i have a 96 gle (well i had, i just blew the tranny so im not driving anything now) and i get that annoyoing vibration when im stopped like at a light or in drive and stopped. its loud and annoyoing as hell. if you get yours fixed please let me know. yeah it does make my change shake, but only when stopped. once i step on it a little its gone.......its frustrating! especially with the amount of red lights in nyc
#30
Originally posted by araffio
Wow, this thread is making me a little apprehensive when it comes to getting a y-pipe. That was going to be one of my next mods, now I don't know. Unless I know for sure what to look out for and what HAS to be done when it's installed.
Wow, this thread is making me a little apprehensive when it comes to getting a y-pipe. That was going to be one of my next mods, now I don't know. Unless I know for sure what to look out for and what HAS to be done when it's installed.
Don't be scared of the y-pipe, be leary about who installs it. Just be sure and supervise if you take it to a local muffler shop. I made the mistake of being in a hurry and dropping off the car w/o me being there to watch. Never again! Anyway, as some of the other threads explain, some have more issues than others but you will definetly be happy with the results.
#32
Originally posted by global_threat
(as the DIY'ers sit back and laugh)
(as the DIY'ers sit back and laugh)
Very funny.....i would have done it myself but my bolts had to be welded off since they were solid rust. and since that cost like 30 bucks, i just paid another 30 to have it put on.
#33
Originally posted by skeelo34
Very funny.....i would have done it myself but my bolts had to be welded off since they were solid rust. and since that cost like 30 bucks, i just paid another 30 to have it put on.
Very funny.....i would have done it myself but my bolts had to be welded off since they were solid rust. and since that cost like 30 bucks, i just paid another 30 to have it put on.
and here is the conversation me and puremax had if it helps:
Juicy Jay3: My Y pipe rattles
Juicy Jay3: i see you had this same problem
Juicy Jay3: i installed it yesterday
AznCraft: oh
AznCraft: shake a lot?
Juicy Jay3: yeah
AznCraft: yea
AznCraft: it's probably touching somewhere down there
Juicy Jay3: when i start the engine it shakes
Juicy Jay3: what did u do?
AznCraft: and when you drive it shakes again right?
Juicy Jay3: yeah
Juicy Jay3: when i start out slow
Juicy Jay3: it vibarates
Juicy Jay3: what a piece
Juicy Jay3: it makes my car sound like a pos
AznCraft: yea i know
AznCraft: take it to the mechenic, tell them the problem, ask them if the y pipe is touching anything
AznCraft: you probably have the same problems I have
AznCraft: i told brian cat, he is sending me ups and he is going to fix it
Juicy Jay3: i went back to my mechanic
Juicy Jay3: after the problem
AznCraft: what they say?
Juicy Jay3: he couldn't figure it out
AznCraft: what the...
Juicy Jay3: he has already put 7 of them on
Juicy Jay3: he has a maxima too
AznCraft: see if the y pipe is touching anything under there
AznCraft: did you ask for the bracket check and stuff?
Juicy Jay3: he said no
Juicy Jay3: he checked everything out
Juicy Jay3: catback bracket?
AznCraft: ask him to see if he can check if it touches the k member
Juicy Jay3: ok
Juicy Jay3: did you buy yours from custommaxima?
AznCraft: yea
AznCraft: group deal
Juicy Jay3: oh
Juicy Jay3: me too
AznCraft: yea
AznCraft: i think we are the unlucky one
Juicy Jay3: so you just talked to brien himself
Juicy Jay3: no gregg
Juicy Jay3: not
AznCraft: greg doesn't know anything
AznCraft: he sent the mail to brian
Juicy Jay3: but he is the one who sold it..
AznCraft: and we talked about it
AznCraft: he doesn't make the y pipe
Juicy Jay3: true true
Juicy Jay3: so is yours fine now?
AznCraft: im still waiting for the ups to pick it uip
Juicy Jay3: this is bull ****, gotta pay for installtion twice. i'm so ****ed!!
AznCraft: i know...
AznCraft: i paid 50 to get it installed
Juicy Jay3: i thought cattman were the best
Juicy Jay3: those things sucks
AznCraft: and then it was being gay so i asked .org... and they told me the mechenic i went to was stupid and blah blah
Juicy Jay3: my machanic is not not dumb
AznCraft: so i paid $32 to get a pro shop take a LOOK at it
AznCraft: they said the same thing
Juicy Jay3: he spends like 2 hours on his max everyday
Juicy Jay3: working on the turbo
AznCraft: so i went BACK to the other one and uninstalled for 40$
AznCraft: ic...
AznCraft: well, it's probably touching something
AznCraft: that's what mine did
Juicy Jay3: k memeber?
AznCraft: yea
AznCraft: mine was shaking like hell
Juicy Jay3: so now ur sending it back..
AznCraft: i had to press the gas hard all the time for it to be good
Juicy Jay3: brien is paying for the shipping right?
AznCraft: and put it on neutral
AznCraft: yea
AznCraft: but, you have to find out the problem
Juicy Jay3: i can't even really feel the difference
AznCraft: and have proof or brian not going to fix it for u
AznCraft: maybe cause of the shake
Juicy Jay3: proof?
AznCraft: i didn't either pal
Juicy Jay3: how u get that?
AznCraft: picture
AznCraft: or somesort or get him to talk to the mechenic
Juicy Jay3: of the black thing or something
Juicy Jay3: ****!!
Juicy Jay3: this is so gay!
AznCraft: yea i know..
Juicy Jay3: i'm not made of ****in money!
AznCraft: just tell him to uninstall it
AznCraft: and put the old one back on
AznCraft: and then after that
Juicy Jay3: cattman should give us free CAI or something
AznCraft: check the y pipe carefully
Juicy Jay3: for our troubles
AznCraft: and see if you see any chiped spots
AznCraft: yea... ****ed me off too...
Juicy Jay3: chipped spots?
AznCraft: 30+40=70 $ of worthless thing
AznCraft: yea
Juicy Jay3: that might be making the noise?
AznCraft: you drove it for a day?
AznCraft: no...
Juicy Jay3: yeah
AznCraft: if it's touching something
Juicy Jay3: all day today
Juicy Jay3: ok
AznCraft: it should be chipped off
AznCraft: part of my ypipe is chipped off
AznCraft: i posted the picture
AznCraft: u see it?
Juicy Jay3: no
Juicy Jay3: webiste didn't work
AznCraft: you have to copy and paste the link
here is the link again::
http://www.geocities.com/rokclan/sexima/Y-pipe.jpg
#34
Originally posted by Str8ridin
man, they better fix my dam.n car! i've read some stuff and it's what you said it is....rubber hanger with the metal hook that held the y-pipe up right next to the cat. I'll check that out first thing in the morning...
man, they better fix my dam.n car! i've read some stuff and it's what you said it is....rubber hanger with the metal hook that held the y-pipe up right next to the cat. I'll check that out first thing in the morning...
I feel you...I'm in the same boat as you...gotta fix this b\s...can't disgrace War Child like this (my Maxima).....
#38
Let me put some good thoughts of the Y on this thread. I had my mechanic do it. He did say he had a hell of a time bending the Cattman to fit, but he did a great job. My car sounds great, and you can't even hear the Y at all. Been on like 3 months already. The gains are sweet. Compliments the CAI very well.
DW
DW
#40
Originally posted by WaarrEagle
I get something like that when I am stopped and the engine RPM drops to around 500 or so. I have a y-pipe too. Do you get that when moving or standing still?
I get something like that when I am stopped and the engine RPM drops to around 500 or so. I have a y-pipe too. Do you get that when moving or standing still?