i did a search and it did not help any so here is my question.....i am excpecting the LED wiper lights in the mail today and i want to intstall them asap and this might sound like a dumb questiong but does the black lining in the hood need to come all the way off or can i just take the bottom half of it off and hwo do the wiper things come out???? do they just pop out or whats the deal??? thanx in advance guys, Tom

 

you don't have to take the lining off and the old ones just pop out but you'll prob need to use a screwdriver or something to assist you mine were a b*tch to get off.

 

ok so i use a screwdriver to pop them out from the inside of the hood??? adn does the water line fit good into the new wiper thigns or was that a b*itch to??

 

Use needlenose pliers, those work better than a screwdriver. And they should be easy to put on.

 

i bought some at a pep boys and put them on and found out they were illegal in indiana. some girl up there already got 5 tickets for them so i took them off and took them back. i go to evansville a bunch and didn't want any tickets

 

 

Mmmm, LED nozzles, RICEY!

 

SOONER OR LATER YOU'RE GONNA GET A TICKET

 

...and come back here and complain about it...

 

AHAHAHAHAHAHAHHAAHAHAH

 

if you want them - go for it -

I personally think they are alittle ricey, the only way I would consider putting them on, is to have them wired to only turn on the side with my turn signal, so they blink when I am turning.. still ricey though

 

they are illegal in chicago too.

 

That's exactly how I have mine wired up ... and I also have them wired to a switch so I only turn them on when it's bad weather or when I'm baiting for a race.

 

lol im about 30 min away from chicago....i know they r illegal but i cant get a ticket unless i actually have them on....(on- with the LED)....right?????

 

 

 

i looked under my hood again tonight and it looks like i NEED to pull off the black cover cuz all i can see is the winsheld fluid line going to the hood of the car throught he black lining....Next i got these black circle peices and it says find the one to fit the hole of ur hood...i got liek 6 of them and they are all the same so i donno i guess it wont be hard finding 2 of the same size....im gonna go ahead and jjust wire them to a toggle switch that is already in my car that way i can just trun them on or off whenever....thanx in advance guys, Tom

 

you do know that that hose pops right off right? so you pull the hose out, take the needle nose pliers and pull the bottom part of the nozzle out, then take off the stock nozzle and just do the swap.. plug the hose back in.

 

they pop right off?????well i just went to my car cuz i wanna install tehm now and i cannot seem to get them off?? cna someone give me some more deatils on how to rip them off??? thanx i wanna get this done ASAP thanx guys

 

I want to run my nozzles to a 3-way switch...
do you know how one works.......or how does a 2-way work at the back end where the prongs come out? do you only wire the prongs with ground wires or power to the on, and ground to the off?

thanks

 

ok well i found out how to take the stock ones out and i wired in the new ones...the blue LED is nice and looks really good in the dark...the instillation was easy the only time sonsuming part was running wires to my switch inside the car buit other than that really really easy.....thanx for all ur help guys!!!