4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

maxima studdering

Thread Tools
 
Search this Thread
 
Old 03-11-2014, 12:51 AM
  #1  
Newbie - Just Registered
Thread Starter
 
Josh_9096's Avatar
 
Join Date: Mar 2014
Posts: 6
maxima studdering

HTML Code:
so I have a 96 maxima and it sputters when accelerated. it had a check engine light on and the codes said misfire #6 and knock sensor and o2 sensor. I replaced the knock sensor moved the coils around and changed plugs and no change. check engine light hasn't come back on either. I did find oil in the spark plug tubes in the back(valve cover gasket). but would that make it studder?
Josh_9096 is offline  
Old 03-11-2014, 05:57 AM
  #2  
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
njmaxseltd's Avatar
 
Join Date: Jun 2001
Posts: 16,033
Yyyyyyou nnnneeedd to pppppppull the cccccccodes. Seeeeeee the ssssssstickys on the ttttttop of tttthhhis fffffffffffforum.
njmaxseltd is offline  
Old 03-11-2014, 08:19 AM
  #3  
Newbie - Just Registered
Thread Starter
 
Josh_9096's Avatar
 
Join Date: Mar 2014
Posts: 6
idk why it didn't show my whole post but I did pull codes and it said knock sensor was bad, o2 sensor and #6 misfire. I replaced knock senor and moved #6 coil over one to see if the misfire moved. still runs like **** and check engine light has not come back on. I replaced spark plugs but the back spark plug tubes had about 4 inches of oil in them. I know I know, I'm gonna replace the valve cover and plug gaskets. but will that make it studder when accelerating?
Josh_9096 is offline  
Old 03-11-2014, 08:49 AM
  #4  
Administrator
iTrader: (43)
 
The Wizard's Avatar
 
Join Date: Feb 2002
Location: Southern California
Posts: 16,646
Fix oil leak. Drop in new plugs. See if problem persists. Could still be bad coilpack(s).
The Wizard is offline  
Old 03-12-2014, 04:07 AM
  #5  
Member
 
6cyl-97maxima's Avatar
 
Join Date: Dec 2013
Posts: 290
Originally Posted by Josh_9096
idk why it didn't show my whole post but I did pull codes and it said knock sensor was bad, o2 sensor and #6 misfire. I replaced knock senorop and moved #6 coil over one to see if the misfire moved. still runs like **** and check engine light has not come back on. I replaced spark plugs but the back spark plug tubes had about 4 inches of oil in them. I know I know, I'm gonna replace the valve cover and plug gaskets. but will that make it studder when accelerating?
The oil getting in around that area will in time detotate the boots on the coils and then can start to missfire and spark leak.
6cyl-97maxima is offline  
Old 03-12-2014, 05:06 AM
  #6  
Supporting Maxima.org Member
iTrader: (3)
 
dwapenyi's Avatar
 
Join Date: Sep 2000
Posts: 6,016
Originally Posted by Josh_9096
idk why it didn't show my whole post but I did pull codes and it said knock sensor was bad, o2 sensor and #6 misfire. I replaced knock senor and moved #6 coil over one to see if the misfire moved. still runs like **** and check engine light has not come back on. I replaced spark plugs but the back spark plug tubes had about 4 inches of oil in them. I know I know, I'm gonna replace the valve cover and plug gaskets. but will that make it studder when accelerating?
You moved the bad coil but did not replace it. That's nice lol.
dwapenyi is offline  
Old 03-12-2014, 08:54 AM
  #7  
Senior Member
iTrader: (16)
 
Quickywd01's Avatar
 
Join Date: May 2007
Location: NorthernNJ
Posts: 3,088
Originally Posted by dwapenyi
You moved the bad coil but did not replace it. That's nice lol.
Replace your spark plug TUBE seals too. Install new spark plugs. NGK copper are like $2-3 a piece vs. the double platinum. Only difference is how long you go between replacing them. $2-3 vs. $8-$15 a plug, I've bought both before. When I first got my '99se I bought the oem double laser platinum. Then when I got educated I started buying the coppers. Cheers.
Quickywd01 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goffery2uned
4th Generation Maxima (1995-1999)
9
08-21-2015 09:50 PM
julian888
7th Generation Classifieds (2009-2015)
0
08-06-2015 04:39 AM
julian888
New Member Introductions
1
08-05-2015 08:26 PM



Quick Reply: maxima studdering



All times are GMT -7. The time now is 11:31 PM.