Hey All,

2 quick questions:

1- When making the turn signal / side marker mod, you cut the ground from the side marker and splice it to the positive of the turn signal, correct?

2- Is the Nissan emblem on the front grill attached like the ones on the trunk, or is it held by screws?

Thanks!!

 

1 Remove the Blinker and side lights from the car.
2 CUT the ground from the sidemarker and reroute it so you can splice it to the (+) of the turn signal. If you don't cut it, all the current from the (+) of the turn signal will go to the uncut ground of the sidemarker = short circuit = blown fuse...
3 Test: when lights are off: Blinkers should go on at same time

when lights are on: Blinkers whould alternate when flashing.

4 Replace lights, and repeat on other side.

you only get 1 answer from me

 

The hamburger is stuck on by adhesive, not screws.

 

Thanks all!!