Tranny Problems
07-16-2018, 07:04 PM
#2
Senior Member
Join Date: Jan 2011
Location: Central AR
Posts: 3,041
Neither.. Actually the transmission has a screen that rarely causes any issues. The transmissions are quite durable. I suspect the issue is electronic and can be repaired without changing the transmission.
08-22-2018, 02:28 PM
#4
Senior Member
Join Date: Mar 2014
Location: Planet Houston
Posts: 615
Is the auto trans vent tube blocked, or kinked ?
This normally looks like an "unconnected vacuum line" immediately inboard of the battery.
One time, when the battery hold down was loose: the battery shifted in-flight and kinked this hose. The report I got was similar: "wouldn't / couldn't shift out of first".
This normally looks like an "unconnected vacuum line" immediately inboard of the battery.
One time, when the battery hold down was loose: the battery shifted in-flight and kinked this hose. The report I got was similar: "wouldn't / couldn't shift out of first".
09-19-2018, 03:47 PM
#5
What does that mean?
Join Date: Apr 2007
Location: Calgary, AB
Posts: 393
Confirm that you don't have any TPS codes. I eventually did get codes after months of increasingly poor shifting and a few days of no shifting at all, and replacing it completely fixed the problem.
09-20-2018, 04:02 PM
#6
Senior Member
Join Date: May 2012
Location: Long Island
Posts: 1,564
Oh.... You mean you have Transmission problems.....
First thing's first,
Pull out the dipstick and inspect and smell the fluid. If it's still red and translucent and doesn't smell cooked, them proceed with the usual list........
First thing's first,
Pull out the dipstick and inspect and smell the fluid. If it's still red and translucent and doesn't smell cooked, them proceed with the usual list........
04-16-2019, 03:50 AM
#7
Newbie - Just Registered
Join Date: Apr 2019
Posts: 1
I am just putting a quick reply on this thread as I am trying to sort out a 95 maxima with what seems to be this exact problem. I will be back here once I have checked the transmission oil on it. ( assuming that is good what is next after checking the vac line?)
EDIT:
Alrighty I have done some further reading.
If I check for errors using the ECU and engine light I assume I would find one of the following error codes? 1104 1107 1201 1205
(I will only be getting around to doing this on Monday so I am doing as much info gathering as I can, don't want to let the mother in law down
)
EDIT:
Alrighty I have done some further reading.
If I check for errors using the ECU and engine light I assume I would find one of the following error codes? 1104 1107 1201 1205
(I will only be getting around to doing this on Monday so I am doing as much info gathering as I can, don't want to let the mother in law down
)
Last edited by Nycticoraci; 04-16-2019 at 04:13 AM.
Thread
Thread Starter
Forum
Replies
Last Post