Post 1/4 mile times...
nov 18, 2001 12:03pm (qualifying run)
rt .686
60' 2.186
330' 6.033
1/8 9.232@77.01mph
990' 11.910
1/4mi 14.329@95.61mph
i ran with my tank below the 1/4 mark, tires to 16psi, no back and passenger seats, launching at 1,500rpm, finish line at the top of 3rd gear. mods as stated below.
rt .686
60' 2.186
330' 6.033
1/8 9.232@77.01mph
990' 11.910
1/4mi 14.329@95.61mph
i ran with my tank below the 1/4 mark, tires to 16psi, no back and passenger seats, launching at 1,500rpm, finish line at the top of 3rd gear. mods as stated below.
Originally posted by MAXimillian98
It CAPITOL RACEWAY my best time was
ET 1/4 MILE 15.3587
RT 0.6337
1/8 9.8830
1/4 MILE 89.1013
INTAKE= TENZO DRAGRACING INTAKE /EXHAUST= MEGAFLOW
It CAPITOL RACEWAY my best time was
ET 1/4 MILE 15.3587
RT 0.6337
1/8 9.8830
1/4 MILE 89.1013
INTAKE= TENZO DRAGRACING INTAKE /EXHAUST= MEGAFLOW
intake, exhaust, UDP, y-pipe, rt cat.
15.10 @ 92mph on a full tank of 89 octane gas
I got my PR CAI on wednesday and just had to go to the track to try it out today. It made about .3 in the 1/4. My previous visit I ran a 14.5 and today 13.8, so I am happy. Thats it for the mods except I am getting a 2k1 muffler this week to put on but hopefully it will just quiet it down a bit over the Nissan replica I have now.
New best time of 14.44@ 94.78... this track has notoriously slow trap speeds, don't know why. I always trap 2mph slower here than other tracks. Intake and Y pipe are power mods, running on 17" Kosei K1s and Toyo T1-S rubber, 2.214 60' time. Best trap speed is still 96.47.
first time at track ever, only got one go
R/T 1.158
60' 2.395
330 6.703
1/8 10.244
MPH 69.04
1000 13.306
1/4 15.890
MPH 87.86
PR CAI, Greddy Exhaust
stock rims/suspension etc.
this was at Bandimere with 5800' elevation. does altitude make a lot of difference?
R/T 1.158
60' 2.395
330 6.703
1/8 10.244
MPH 69.04
1000 13.306
1/4 15.890
MPH 87.86
PR CAI, Greddy Exhaust
stock rims/suspension etc.
this was at Bandimere with 5800' elevation. does altitude make a lot of difference?
IM NEW 1/4 TIME OLD
STOCK I RAN A 14.8@91MPH.60 FT,WAS 2.132.STOCK WITH THA EXEPTION OF BEING DROPPED AND AIR FILTER POP CHARGER.ON MY 85 SHOT OF NITROUS,AND 17 INCH RIMS I RAN A 2.6 60FT NO TRACTION,BUT DIALED IN A 13.56@105MPH.TIP ACT XTREME CLUTCH WILL DESTROY YOUR TRANNY IF YOU DONT HAVE AN AFTER MARKET FLYWHEEL AND A LOT OF POWER.ON MY 60 SHOT OF NITROUS I RAN A 14.3@98.89MPH,60FT WAS A 2.4.WAITING TO GET MY SLICKS AND ILL POST MY TIME SOON HOPEFULLY A 13.2,OR13.1,@106,OR107.POST MY PIX SOON AND MY TIME SLIPS.AN AUTO 14.00 100MPH VERY IMPRESSIVE MAXIMA
Guest
Posts: n/a
I got a 96SE bone stock engine with spare tire, CAI>>CAT BACK>>LOWERING SPRINGS............
Houston Raceway Park
By. Pennzoil co.
R/T ... .834
60' ... 2.464
330 ... 6.901
1/8 ... 10.544
MPH ... 68.63
1000 ... 13.631
1/4 ... 16.259
MPH ... 86.30
Tell me what you think of my run?????
Houston Raceway Park
By. Pennzoil co.
R/T ... .834
60' ... 2.464
330 ... 6.901
1/8 ... 10.544
MPH ... 68.63
1000 ... 13.631
1/4 ... 16.259
MPH ... 86.30
Tell me what you think of my run?????
Houston Raceway Park - First run ever! Very Fun!!
Temperature 85: Humidity 90% : 1/4 tank gas : Stock Rim/Tire
RT: ... .959
60: ... 2.437
330: ... 6.686
1/8: ... 10.164
MPH: ... 70.68
1000: ... 13.152
1/4: ... 15.659
MPH: ... 90.2
My wife's(Stephanie) best time:
RT: ... 1.567
60: ... 2.348
330: ... 6.582
1/8: ... 10.033
MPH: ... 71.25
1000: ... 12.992
1/4: ... 15.481
MPH: ... 89.97
Bone stock 97SE 5-spd
Temperature 85: Humidity 90% : 1/4 tank gas : Stock Rim/Tire
RT: ... .959
60: ... 2.437
330: ... 6.686
1/8: ... 10.164
MPH: ... 70.68
1000: ... 13.152
1/4: ... 15.659
MPH: ... 90.2
My wife's(Stephanie) best time:
RT: ... 1.567
60: ... 2.348
330: ... 6.582
1/8: ... 10.033
MPH: ... 71.25
1000: ... 12.992
1/4: ... 15.481
MPH: ... 89.97
Bone stock 97SE 5-spd
15.05 @ 91.24 (N/A)
RT - 0.6874
60 FT - 2.2879
330 FT - 6.3128
1/8 ET - 9.6443
1/8 MPH - 73.42
1000 ET - 12.5858
1000 MPH - 83.31
1/4 ET - 15.0588
1/4 MPH - 91.24
I have a CAI with some custom piping on it, y-pipe, JWT ECU, 2.25" exhaust, A'PEXi N1 muffler, Don's VB Mod, Hayden 403 Tranny Cooler, Tranny Resistor By-Pass Switch, 17" Enkei RS6 w/ 215/40/17 Kumho Ecsta Supra 712, Warpspeed Stage 1 & 2 SFC's, Sprint Springs, Tokico Blues, FSTB, Addco RSB.
60 FT - 2.2879
330 FT - 6.3128
1/8 ET - 9.6443
1/8 MPH - 73.42
1000 ET - 12.5858
1000 MPH - 83.31
1/4 ET - 15.0588
1/4 MPH - 91.24
I have a CAI with some custom piping on it, y-pipe, JWT ECU, 2.25" exhaust, A'PEXi N1 muffler, Don's VB Mod, Hayden 403 Tranny Cooler, Tranny Resistor By-Pass Switch, 17" Enkei RS6 w/ 215/40/17 Kumho Ecsta Supra 712, Warpspeed Stage 1 & 2 SFC's, Sprint Springs, Tokico Blues, FSTB, Addco RSB.
This is my very first visit to the track. I had been driving a standard tranny for 7 days at this point. The car is bone stock, right down to the tires.
1995 Maxima SE 5-spd
1995 Maxima SE 5-spd
This thread will be locked and unstickied next Friday (June 21).
Please post further track times in the new Track and Tune Forums
Thank you.
Please post further track times in the new Track and Tune Forums
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post





