ATTN: 4x4 '97-'99 Maxima SE's...
#1
ATTN: 4x4 '97-'99 Maxima SE's...
I need any unlowered '97-'99 SE driver to do me a favor. Go outside to your Maxima with a tape measure. Take the tape measure and measure from the wheelwell down to the centercap of the wheel. Do this for each wheel and report back to me with the measurements.
Thanks,
-Nick
Thanks,
-Nick
#2
Re: ATTN: 4x4 '97-'99 Maxima SE's...
Originally posted by Nick97SE
I need any unlowered '97-'99 SE driver to do me a favor. Go outside to your Maxima with a tape measure. Take the tape measure and measure from the wheelwell down to the centercap of the wheel. Do this for each wheel and report back to me with the measurements.
Thanks,
-Nick
I need any unlowered '97-'99 SE driver to do me a favor. Go outside to your Maxima with a tape measure. Take the tape measure and measure from the wheelwell down to the centercap of the wheel. Do this for each wheel and report back to me with the measurements.
Thanks,
-Nick
oops, my car is lowered..
#5
Originally posted by Freedog
Rt rear- 15 1/4"
Rt front- 16 1/4"
Lt Front- 16"
Lt rear- 16"
My driveway is uneven though. I'll have to find a relatively flat area and measure it again.
Rt rear- 15 1/4"
Rt front- 16 1/4"
Lt Front- 16"
Lt rear- 16"
My driveway is uneven though. I'll have to find a relatively flat area and measure it again.
and you are in the military too!!
#6
Originally posted by Freedog
Rt rear- 15 1/4"
Rt front- 16 1/4"
Lt Front- 16"
Lt rear- 16"
My driveway is uneven though. I'll have to find a relatively flat area and measure it again.
Rt rear- 15 1/4"
Rt front- 16 1/4"
Lt Front- 16"
Lt rear- 16"
My driveway is uneven though. I'll have to find a relatively flat area and measure it again.
..........
Would it be fair to say that stock ride height from the center of the wheels to the wheelwell is 16"?
I just measured mine and the front is 14" and the back is 13.5". So that means I'm lowered 2" in the front and 2.5" in the back.
Later,
-Nick
Thread
Thread Starter
Forum
Replies
Last Post