4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Want MUCHO HP for my Maxima

Old Apr 20, 2002 | 09:33 AM
  #1  
sciff5's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Feb 2002
Posts: 2,581
From: Mass
Want MUCHO HP for my Maxima

Alright what would it take to get a 97 maxima 5 speed to produce 400HP at the wheels. I am thinkin turbo and a built engine and NOS. I am wondering exactly what I would need to do it. I saw that there are a couple of Maxs out there with turbos runing at 9psi making 360hp. I'de like to run my Max at 12 or 14. I know there must be a reason why people aren't runnin boost this high already so what is it? With the use of compression lowering pistons and a completly built engine shouldent 12 or 14 psi be no big deal?
Alright I am still pretty new to Maximas so fill me in here. I was thinkin about getting a VW GTI VR6 and getting an EIP turbo on it. But I really like Maximas a lot more. I am just hoping I can find a turbo system for the Maxima that can deliver as much HP as the EIP turbo systems put out I meen check EIP out. They make some crazy fast VR6s that would eat maximas for breakfast and I am lookin for a car that is faster than a 911 in the quarter mile.
Old Apr 20, 2002 | 10:40 AM
  #2  
MardiGrasMax's Avatar
Supporting Maxima.org Member
iTrader: (14)
 
Joined: Aug 2000
Posts: 4,491
Re: Want MUCHO HP for my Maxima

Originally posted by sciff5
I am lookin for a car that is faster than a 911 in the quarter mile.
Buy a Z06 and add nitrous.
Old Apr 20, 2002 | 11:16 AM
  #3  
Jime's Avatar
Banned
iTrader: (10)
 
Joined: Jan 2002
Posts: 4,919
From: https://t.me/pump_upp
Re: Want MUCHO HP for my Maxima

Originally posted by sciff5
I was thinkin about getting a VW GTI VR6 and getting an EIP turbo on it.
Its a lot cheaper to get a VR6 to hit 12's than a Max and a lot more goodies available for it. But the Max is nicer to ride in.
Old Apr 20, 2002 | 02:07 PM
  #4  
Paradoxish's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 274
Re: Want MUCHO HP for my Maxima

Originally posted by sciff5
Alright what would it take to get a 97 maxima 5 speed to produce 400HP at the wheels. I am thinkin turbo and a built engine and NOS. I am wondering exactly what I would need to do it. I saw that there are a couple of Maxs out there with turbos runing at 9psi making 360hp. I'de like to run my Max at 12 or 14. I know there must be a reason why people aren't runnin boost this high already so what is it? With the use of compression lowering pistons and a completly built engine shouldent 12 or 14 psi be no big deal?
Alright I am still pretty new to Maximas so fill me in here. I was thinkin about getting a VW GTI VR6 and getting an EIP turbo on it. But I really like Maximas a lot more. I am just hoping I can find a turbo system for the Maxima that can deliver as much HP as the EIP turbo systems put out I meen check EIP out. They make some crazy fast VR6s that would eat maximas for breakfast and I am lookin for a car that is faster than a 911 in the quarter mile.
I don't know why I'm even bothering to respond to this, but a supercharger and some other mods will bring you into the 300+ range.
Old Apr 20, 2002 | 02:15 PM
  #5  
gtr_rider's Avatar
192.168.1.1
iTrader: (50)
 
Joined: Dec 2000
Posts: 17,617
From: Ft. Lauderdale, FL
Turbo + Ypipe, and I think exhaust? Gets you to 390+FWHP
Old Apr 20, 2002 | 02:55 PM
  #6  
tifosiv122's Avatar
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Jun 2001
Posts: 2,675
Air France should be stopping the Concorde flights soon. Buy one engine and zip tie it to your trunk...instant 10 second car.

{This has been tested and works...write up coming soon!}

Erik
Old Apr 20, 2002 | 05:24 PM
  #7  
Paradoxish's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 274
Originally posted by tifosiv122
Air France should be stopping the Concorde flights soon. Buy one engine and zip tie it to your trunk...instant 10 second car.

{This has been tested and works...write up coming soon!}

Erik
Zip ties alone don't work. Better to glue it down and then apply some 3M tape before putting the zip ties on. Don't forget to add a few hundred wings to keep from lifting off the ground.

Old Apr 20, 2002 | 07:07 PM
  #8  
sciff5's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Feb 2002
Posts: 2,581
From: Mass
Thanks guys, theres a lot of comedians in this forum. Seriously there are people htting 390hp at the wheels and I just wanna know what would tak me to like 400 and if it's even possible.
damn wise guys. Lol yeah I'm a newbie but common 400hp is not impossible.
Old Apr 20, 2002 | 07:28 PM
  #9  
rmb's Avatar
rmb
Senior Member
 
Joined: Apr 2002
Posts: 590
Originally posted by sciff5
Thanks guys, theres a lot of comedians in this forum. Seriously there are people htting 390hp at the wheels and I just wanna know what would tak me to like 400 and if it's even possible.
damn wise guys. Lol yeah I'm a newbie but common 400hp is not impossible.
Possible...? Sure anything's possible if you have enough money but you're in the wrong forum...

If you want a 400hp car that's faster than a 911 in the 1/4 mile then you don't start with a 4-door V6 front wheel drive sedan that in stock form makes 190hp... It doesn't make sense.

There are much better cars to start with for something like that.

-RMB
Old Apr 20, 2002 | 09:16 PM
  #10  
peteymax99's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 160
Originally posted by rmb


Possible...? Sure anything's possible if you have enough money but you're in the wrong forum...

If you want a 400hp car that's faster than a 911 in the 1/4 mile then you don't start with a 4-door V6 front wheel drive sedan that in stock form makes 190hp... It doesn't make sense.

There are much better cars to start with for something like that.

-RMB
Don't mess with perfection.
Old Apr 21, 2002 | 10:20 PM
  #11  
Romeo's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 966
Originally posted by sciff5
Thanks guys, theres a lot of comedians in this forum. Seriously there are people htting 390hp at the wheels and I just wanna know what would tak me to like 400 and if it's even possible.
damn wise guys. Lol yeah I'm a newbie but common 400hp is not impossible.
u might try searching on the org as you could easily answer all of your questions. but here's a free answer:

400 crank hp is not impossible. definately need some engine work. run a s/c with like a 2.XX pulley and like a 50-60 DPI shot. hell, make it a 75 shot.

now, try driving it. wheel spin is a *****, huh? the problem isn't making the power, it's putting it to the ground. limited slip differential is a must. Quaife or an I30. like some one said before, a front wheel drive V6 sedan isn't meant to outrun a 911.
Old Apr 21, 2002 | 10:28 PM
  #12  
Paradoxish's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 274
Originally posted by Romeo


u might try searching on the org as you could easily answer all of your questions. but here's a free answer:

400 crank hp is not impossible. definately need some engine work. run a s/c with like a 2.XX pulley and like a 50-60 DPI shot. hell, make it a 75 shot.

now, try driving it. wheel spin is a *****, huh? the problem isn't making the power, it's putting it to the ground. limited slip differential is a must. Quaife or an I30. like some one said before, a front wheel drive V6 sedan isn't meant to outrun a 911.
Don't forget the other thing you'll need: sh*tloads of cash. But if you've got the money then do the research and let us know how it comes out.
Old Apr 21, 2002 | 10:35 PM
  #13  
Justin95SE's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2000
Posts: 806
turbo is in colorado

somebody did it recently, 2600 bucks non intercooled. you have to drive out htere, and wait a while im sure. best to get a SC i think that puts you at 270hp. smaller pulley and add to that. isnt there a few NAs running around 400. (NA if NOS stuff doesnt count.) best of luck, and be prepared to pay a lot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goffery2uned
4th Generation Maxima (1995-1999)
9
Aug 21, 2015 09:50 PM
julian888
7th Generation Classifieds (2009-2015)
0
Aug 6, 2015 04:39 AM
julian888
New Member Introductions
1
Aug 5, 2015 08:26 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:29 AM.