4 New Mods Today : )
05-01-2002, 08:40 PM
#1
4 New Mods Today : )
So I finally got some mods done today...
1. Blue LED in the Factory Security hole. Pretty easy mod, looks amazing. Thanks for the LED, Don (Pearl96Max)! The LED is so bright it could blind someone...pics below:
http://www.eden.rutgers.edu/~ferraris/DSC00103.JPG
http://www.eden.rutgers.edu/~ferraris/DSC00104.JPG
2. Pioneer SDV-P7 In Dash DVD player installed in third din. Yes, the navigation unit played DVD movies, but now I can navigate and watch movies at the same time. (The movie playing is Heist)
http://www.eden.rutgers.edu/~ferraris/DSC00112.JPG
3. Pioneer CDX-P1270 12 Disk CD Changer installed under the drivers seat. Yes, it fit. Yes, I can take out the magazine. No, I can no longer move my seat up and down (without crushing the unit). I can move the back forward and back and the seat forward and back, but not up or down. No big deal..i'd rather have the disk changer.
http://www.eden.rutgers.edu/~ferraris/DSC00122.JPG
4. Belkin Auto A/C installed under drivers seat. This was installed so I can run stuff like a laptop, palm charger, or video camera without using their own batteries. It's installed next to the CD changer.
http://www.eden.rutgers.edu/~ferraris/DSC00122.JPG
Man, I couldn't wait to get some of this stuff in....my modding is almost complete...just a few hundred mods left to do (most of them sitting in my house, lol)
Erik
1. Blue LED in the Factory Security hole. Pretty easy mod, looks amazing. Thanks for the LED, Don (Pearl96Max)! The LED is so bright it could blind someone...pics below:
http://www.eden.rutgers.edu/~ferraris/DSC00103.JPG
http://www.eden.rutgers.edu/~ferraris/DSC00104.JPG
2. Pioneer SDV-P7 In Dash DVD player installed in third din. Yes, the navigation unit played DVD movies, but now I can navigate and watch movies at the same time. (The movie playing is Heist)
http://www.eden.rutgers.edu/~ferraris/DSC00112.JPG
3. Pioneer CDX-P1270 12 Disk CD Changer installed under the drivers seat. Yes, it fit. Yes, I can take out the magazine. No, I can no longer move my seat up and down (without crushing the unit). I can move the back forward and back and the seat forward and back, but not up or down. No big deal..i'd rather have the disk changer.
http://www.eden.rutgers.edu/~ferraris/DSC00122.JPG
4. Belkin Auto A/C installed under drivers seat. This was installed so I can run stuff like a laptop, palm charger, or video camera without using their own batteries. It's installed next to the CD changer.
http://www.eden.rutgers.edu/~ferraris/DSC00122.JPG
Man, I couldn't wait to get some of this stuff in....my modding is almost complete...just a few hundred mods left to do (most of them sitting in my house, lol)
Erik
05-01-2002, 10:00 PM
#6
Senior Member
Join Date: Jan 2002
Posts: 274
Looks cool. I was thinking about doing the security light, but I'm not sure how to get at it. 
Putting the Belkin Auto AC under the seat was a good idea too. Nothing like having a plug right there. I was planning on doing something similiar in the trunk for my eventual computer mods, but building some kind of enclosure around it so it looked more stock. I also considered putting it in the rear armrest (flip down - plug in
), because I didn't want it anywhere conspicuous.
Putting the Belkin Auto AC under the seat was a good idea too. Nothing like having a plug right there. I was planning on doing something similiar in the trunk for my eventual computer mods, but building some kind of enclosure around it so it looked more stock. I also considered putting it in the rear armrest (flip down - plug in
), because I didn't want it anywhere conspicuous.
05-01-2002, 10:14 PM
#8
Senior Member
Join Date: Jan 2002
Posts: 1,422
Originally posted by iregula
damn that tree must have hurt! i thought the middle pic was a pool!
damn that tree must have hurt! i thought the middle pic was a pool!
the mods are starting to pile up in my room!
05-02-2002, 05:59 AM
#12
Originally posted by Lime
I dind't know Belkin was making those! I wanna get one!!! Very kewl, Erik. Next time you stop up here in CT, don't blind me with more blue lights!
I dind't know Belkin was making those! I wanna get one!!! Very kewl, Erik. Next time you stop up here in CT, don't blind me with more blue lights!
05-02-2002, 06:00 AM
#13
Originally posted by maximumsport
That LED looks really hot!!
Is there any way you can do a little write up on what step you took in doing this mod?
Thanks.
That LED looks really hot!!
Is there any way you can do a little write up on what step you took in doing this mod?
Thanks.
05-02-2002, 06:58 AM
#14
Originally posted by maximumsport
That LED looks really hot!!
Is there any way you can do a little write up on what step you took in doing this mod?
Thanks.
That LED looks really hot!!
Is there any way you can do a little write up on what step you took in doing this mod?
Thanks.
Erik
05-02-2002, 07:00 AM
#15
Originally posted by Lime
I dind't know Belkin was making those! I wanna get one!!! Very kewl, Erik. Next time you stop up here in CT, don't blind me with more blue lights!
I dind't know Belkin was making those! I wanna get one!!! Very kewl, Erik. Next time you stop up here in CT, don't blind me with more blue lights!
Now that classes are on the last week and finals are next week maybe we need to have another "meet" in CT, last time was lots of fun.
Erik
05-02-2002, 07:40 AM
#16
Originally posted by SprintMax
Rodney Splice says you don't need anymore rice mods.. you need power
Rodney Splice says you don't need anymore rice mods.. you need power
05-02-2002, 09:43 AM
#17
Originally posted by maximumsport
lol you big fassyhole you a talk bout Rodney Splice like him and you a batty lovers... learn how to drive manual **** than talk **** !
lol you big fassyhole you a talk bout Rodney Splice like him and you a batty lovers... learn how to drive manual **** than talk **** !
break 14's
then come talk to me
05-02-2002, 09:55 AM
#18
Re: 4 New Mods Today : )
Erik
You're confusing me
I thought you had an SE, but your gauges are black w/ white lettering.
I thought you got the rings for the guages too ... and reverse indiglos?
Or am I smoking crack again?
Oh well, back to crack
You're confusing me
I thought you had an SE, but your gauges are black w/ white lettering.
I thought you got the rings for the guages too ... and reverse indiglos?
Or am I smoking crack again?
Oh well, back to crack
05-02-2002, 11:50 AM
#20
DAM I'M JEALOUS!!!
I always thought to myself that DVDs were a big waste of money in the car cause it's like....u know? but dam, it's looks real nice...nice size screen and all, DAM YOU ERIK, DAM U TO HELL!!!!
I always thought to myself that DVDs were a big waste of money in the car cause it's like....u know? but dam, it's looks real nice...nice size screen and all, DAM YOU ERIK, DAM U TO HELL!!!!
05-02-2002, 01:23 PM
#21
Re: Re: 4 New Mods Today : )
Originally posted by pocketrocket
Erik
You're confusing me
I thought you had an SE, but your gauges are black w/ white lettering.
I thought you got the rings for the guages too ... and reverse indiglos?
Or am I smoking crack again?
Oh well, back to crack
Erik
You're confusing me
I thought you had an SE, but your gauges are black w/ white lettering.
I thought you got the rings for the guages too ... and reverse indiglos?
Or am I smoking crack again?
Oh well, back to crack
I have an SE. I also have GLE doors, hood, trunk, bumpers, and interior. I have 2 sets of gauges, stock GLE set and Indiglo, Carbon Fiber and Gauge ring set, which will be put in as soon as I pass inspection which might be never....it was due Novemeber of 2001...
Erik
05-02-2002, 05:12 PM
#23
Re: Re: Re: 4 New Mods Today : )
Originally posted by tifosiv122
Long Long Long story.
I have an SE. I also have GLE doors, hood, trunk, bumpers, and interior. I have 2 sets of gauges, stock GLE set and Indiglo, Carbon Fiber and Gauge ring set, which will be put in as soon as I pass inspection which might be never....it was due Novemeber of 2001...
Erik
Long Long Long story.
I have an SE. I also have GLE doors, hood, trunk, bumpers, and interior. I have 2 sets of gauges, stock GLE set and Indiglo, Carbon Fiber and Gauge ring set, which will be put in as soon as I pass inspection which might be never....it was due Novemeber of 2001...
Erik
Sorry, a writeup is a real waste of time...I am going to break it down pretty simply.
1. Disconnect Negative Battery terminal
2. Remove dashboard (indiglo gauge instruction {maximadriver.com})
3. Remove Security led box.
4. Take it apart (it comes apart in the middle)
5. Drill hole in the clear part (next to word SECURITY)
6. Stick LED in hole.
7. Wire LED using instructions on LED case
8. Put back dash.
9. Connect Negative Battery terminal.
If you need any help, im or e-mail me
Erik
05-02-2002, 05:51 PM
#24
Originally posted by maximumsport
lol you big fassyhole you a talk bout Rodney Splice like him and you a batty lovers... learn how to drive manual **** than talk **** !
lol you big fassyhole you a talk bout Rodney Splice like him and you a batty lovers... learn how to drive manual **** than talk **** !
batty lovers... never thought i would see Patois on maxima.org lololol
05-02-2002, 07:28 PM
#27
Re: Re: Re: 4 New Mods Today : )
Originally posted by tifosiv122
Long Long Long story.
I have an SE. I also have GLE doors, hood, trunk, bumpers, and interior. I have 2 sets of gauges, stock GLE set and Indiglo, Carbon Fiber and Gauge ring set, which will be put in as soon as I pass inspection which might be never....it was due Novemeber of 2001...
Erik
Long Long Long story.
I have an SE. I also have GLE doors, hood, trunk, bumpers, and interior. I have 2 sets of gauges, stock GLE set and Indiglo, Carbon Fiber and Gauge ring set, which will be put in as soon as I pass inspection which might be never....it was due Novemeber of 2001...
Erik
05-02-2002, 08:20 PM
#28
Re: Re: Re: Re: 4 New Mods Today : )
Originally posted by Kashoggio
hmm also I dont think you have 67000 miles on your car
hmm also I dont think you have 67000 miles on your car
Erik
05-02-2002, 08:26 PM
#29
Originally posted by ladeesman
Woah dude, you did so much more than I did. Ijust replaced the LED with a blue one.
Woah dude, you did so much more than I did. Ijust replaced the LED with a blue one.
Erik
05-02-2002, 09:04 PM
#32
Re: Re: Re: Re: Re: 4 New Mods Today : )
Originally posted by MaxJag
Nice Mods Erik
Did you use the blue led from radio shack?
Nice Jag also. I've got a 90 XJ6.
Nice Mods Erik
Did you use the blue led from radio shack?
Nice Jag also. I've got a 90 XJ6.
Erik
05-02-2002, 09:36 PM
#35
Re: Re: Re: Re: Re: Re: Re: Re: 4 New Mods Today : )
Originally posted by MaxJag
how much was the led? how can I get one?
I need the blue SECURITY light.
how much was the led? how can I get one?
I need the blue SECURITY light.
MyPearlTPI@aol.com
Tell him you want the same LED he gave me. (Blue flashing)
Erik
05-02-2002, 09:47 PM
#36
Eric, you just have the pioneer tv with the avm unit right? doesn't look like you have it hooked up to a pioneer hu. how's it work with the avm. is it a tuner? how do you control the radio if it is. also how's the avm look on the tv? from what i can gather it gives you a lot of nice eye candy (good!). just wondering how the radio works with the avm.
thanks.
thanks.
05-02-2002, 09:54 PM
#37
Originally posted by CKNY
Eric, you just have the pioneer tv with the avm unit right? doesn't look like you have it hooked up to a pioneer hu. how's it work with the avm. is it a tuner? how do you control the radio if it is. also how's the avm look on the tv? from what i can gather it gives you a lot of nice eye candy (good!). just wondering how the radio works with the avm.
thanks.
Eric, you just have the pioneer tv with the avm unit right? doesn't look like you have it hooked up to a pioneer hu. how's it work with the avm. is it a tuner? how do you control the radio if it is. also how's the avm look on the tv? from what i can gather it gives you a lot of nice eye candy (good!). just wondering how the radio works with the avm.
thanks.
Pioneer AVX-7000CD - 7" Screen and CD player
Pioneer AVM-P8000R - Master Unit
Pioneer AVIC-9DVD - Navigation / DVD player
Pioneer SDV-P7 - DVD Player
Pioneer CDX-P1270 - 12 Disk CD Changer
Erik
05-02-2002, 10:57 PM
#38
yeah .. every time mi turn mi rass back diss bumbo clat batty bwoy a chat **** to mi
Originally posted by DAREN
you big fassyhole.... LMAO
batty lovers... never thought i would see Patois on maxima.org lololol
you big fassyhole.... LMAO
batty lovers... never thought i would see Patois on maxima.org lololol
05-03-2002, 05:28 AM
#40
Donating Maxima.org Member
Join Date: Apr 2001
Posts: 4,154
Originally posted by tifosiv122
I'm not sure if Belkin still makes them. Mine is over 10 years old, lol. I can't use it with the cig. line anymore (starter button) so we threw it in...Belkin makes great stuff and I never had a problem with the unit!
Now that classes are on the last week and finals are next week maybe we need to have another "meet" in CT, last time was lots of fun.
I'm not sure if Belkin still makes them. Mine is over 10 years old, lol. I can't use it with the cig. line anymore (starter button) so we threw it in...Belkin makes great stuff and I never had a problem with the unit!
Now that classes are on the last week and finals are next week maybe we need to have another "meet" in CT, last time was lots of fun.
Anyway, I'll have to look...it would be kewl to have that in my car...I think that scary new Pontiac SUV comes with a regular plug in it or something...it's neat, but I wouldn't buy it LOL.
Yes I keep meaning to plan another LAN party, but I've been busy.
