CEL Codes....Help Anyone
CEL Codes....Help Anyone
Well I checked all my sparkplugs and disconnected the sensors on them. I believe that triggered my CEL. So I hear about performance being lost big time with knock sensors and how it doesn't trigger the CEL but it follows with other things that will set it off. Well pulled out 03-04 and that was Knock Sensor...So i will be replacing that soon hopefully. Then came out 12-05 which was Line Pressure Solenoid Valve (Automatic Transmission) and I have no clue what that is. Can anyone help me out???
Chris
Chris
Originally posted by Jamsan
try resseting the ECU first, and then drive around, and see if it comes back...if it doesnt, i wouldnt worry about it....
try resseting the ECU first, and then drive around, and see if it comes back...if it doesnt, i wouldnt worry about it....
before you do anything, reset it, and see if they come back....my guess is the knock sensor will come back, so you should change that, and then the other one might come back....if it does, well **** you got me
well like i said, reset the ECU, and check again in a few days, or if your CEL comes back on.....if the CEL doesnt come back on, and there are no codes, then you shold be fine, but id wait for someone with a little more knowledge on the subject respond
Originally posted by Jamsan
well like i said, reset the ECU, and check again in a few days, or if your CEL comes back on.....if the CEL doesnt come back on, and there are no codes, then you shold be fine, but id wait for someone with a little more knowledge on the subject respond
well like i said, reset the ECU, and check again in a few days, or if your CEL comes back on.....if the CEL doesnt come back on, and there are no codes, then you shold be fine, but id wait for someone with a little more knowledge on the subject respond
thats the third time you repeated yourself....
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
Oct 2, 2022 02:13 PM
JoshG
4th Generation Maxima (1995-1999)
51
Sep 21, 2015 10:41 PM
ballerchris510
3rd Generation Maxima (1989-1994)
9
Sep 10, 2015 09:35 PM




