F/S: LED Interior Light Similar to Metal Max's
Some pics for everyone's enjoyment.
Here are some long over due pics for the License plate lights I purchased from Maxima112. There 8 leds for each license plate light and are very bright. As you can see from the pics the lights have a slight blut tint to them, but are more white in person. These photos really don't do them justice. I've had the lights for about a month now and love them




Can someone who has these installed clarify????
I was going to get a DSLR but I would rather put my money into my new house then buy a new camera. Again these lights are way brighter then the regular bulbs and if you got the chance to get them you will agree.
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
what i was referring to is lighting for the reverse to see 8+ feet away (from the driver seat to 4 feet away from the rear bumper.) and H3 bulb will produce more lighting mainly because it is larger and made for projecting a large amount of light (example: fog lights). Not to mention the reflectors inside the reverse will help produce more light than just a LED board. Our interior lighting no do not have reflector lens inside to bounce light. Sorry for the confusion but no bulb that i've seen can compare to the brightest the boards have for interior use (around 3-4 feet light coverage.) w/out a reflector of some kind
Last edited by Maxima112; Jan 8, 2008 at 05:18 PM.
if you wait ... say untill like june or something, the price of the DSLR would be even cheaper
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
One of my map lights went out, and when I replaced the bulb with a parts store bulb.. the damn thing wasn't as bright as the OE bulb.
Could we get a picture of the map light board, and if possible, a comparison between the OE bulb next to the LED board. I'd like to see pic 1 LED bulb OFF then pic 2 LED off and bulb on.
I've also seen a website that sells LEDs that are soldered into a blub holder. They'll install just like a blub, but are made with LEDs so its brighter and lasts longer.
Could we get a picture of the map light board, and if possible, a comparison between the OE bulb next to the LED board. I'd like to see pic 1 LED bulb OFF then pic 2 LED off and bulb on.
I've also seen a website that sells LEDs that are soldered into a blub holder. They'll install just like a blub, but are made with LEDs so its brighter and lasts longer.
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
cool thanks, lol you didnt even need to send the payment yet.
I sent out invoices to everyone that ordered boards. this is prob my last order into him so whatever is left over from no shows i'll post up and it'll be first come first serve (after the waitlist is taken care of).
sorry about the delay i've been busy this weekend with b day stuff.
I sent out invoices to everyone that ordered boards. this is prob my last order into him so whatever is left over from no shows i'll post up and it'll be first come first serve (after the waitlist is taken care of).
sorry about the delay i've been busy this weekend with b day stuff.
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
the new order should be in my hands soon. *knock on wood. production is going well. if there are any left like i said i'll post. Unless there is all of a sudden a HUGE demand like the 2nd round, i wont be making anymore of these. except to keep some around for warranty purposes.
Canada members, you get yours yet?? it should be in this week. it has been around that 7-10 days period. yellow package remember.
Canada members, you get yours yet?? it should be in this week. it has been around that 7-10 days period. yellow package remember.
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
One of my map lights went out, and when I replaced the bulb with a parts store bulb.. the damn thing wasn't as bright as the OE bulb.
Could we get a picture of the map light board, and if possible, a comparison between the OE bulb next to the LED board. I'd like to see pic 1 LED bulb OFF then pic 2 LED off and bulb on.
I've also seen a website that sells LEDs that are soldered into a blub holder. They'll install just like a blub, but are made with LEDs so its brighter and lasts longer.
Could we get a picture of the map light board, and if possible, a comparison between the OE bulb next to the LED board. I'd like to see pic 1 LED bulb OFF then pic 2 LED off and bulb on.
I've also seen a website that sells LEDs that are soldered into a blub holder. They'll install just like a blub, but are made with LEDs so its brighter and lasts longer.
Thread Starter
Joined: Oct 2003
Posts: 1,821
From: Irvine, CA
if you open the door do all LED bulbs turn on? I'm a little unclear of the problem.





