5th Generation Classifieds (2000-2003) Buy, sell, trade parts for 2000-2003 Maximas

WTB: Passenger side axle for 02-03 Maxima MT

Thread Tools
 
Search this Thread
 
Old 12-02-2007 | 10:57 AM
  #1  
pimpin02max's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Jan 2006
Posts: 1,366
From: Desloge, MO
WTB: Passenger side axle for 02-03 Maxima MT

I have tried and tried and tried to get one and they keep sending me the wrong one, and I'm for for 100% sure that it's the axle that's wrong to I dont' want to pay $150 for Raxles so does anyone have one off of a totaled Maxima or something?
Old 12-02-2007 | 12:58 PM
  #2  
Orgullo's Avatar
$$ Ballin on a Budget $$
iTrader: (47)
 
Joined: Mar 2006
Posts: 2,189
From: North FL.
Where are you buying it from? I went to Auto Zone and got both the right and left for a little over a 120.00. That's after I returned the core. Not to mention they have a life time warranty on their parts.

Can't go wrong.
Old 12-02-2007 | 04:07 PM
  #3  
6SPD02SE's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2007
Posts: 283
From: Lancaster, PA
Originally Posted by Orgullo
Where are you buying it from? I went to Auto Zone and got both the right and left for a little over a 120.00. That's after I returned the core. Not to mention they have a life time warranty on their parts.

Can't go wrong.
Was yours for an 02-03 6 speed? I had this problem a few months ago. Almost impossible to find one. I just ended up getting mine fixed.

pimpin02max, what is wrong with yours that it needs replaced?
Old 12-02-2007 | 09:05 PM
  #4  
pimpin02max's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Jan 2006
Posts: 1,366
From: Desloge, MO
Well the front end on the passenger side vibrates real bad and kind-of clunks and it only does it under load, and I looked and a lot of stuff said that it's the inner CV joints are bad, and also NismoVQ35 had this problem and couldn't figure out what was wrong and it was the CV joints. Also to Orgullo I have tried Autozone and they sent me the wrong part, I think the MT axle is different and they are sending me the AT, it is only about 2 inches shorter...
Old 12-02-2007 | 10:23 PM
  #5  
Drockb418's Avatar
Senior Member
iTrader: (10)
 
Joined: May 2007
Posts: 1,393
From: Edmond Oklahoma
its 50 at Napa when you buy a refurbished one
Old 12-03-2007 | 10:18 AM
  #6  
pimpin02max's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Jan 2006
Posts: 1,366
From: Desloge, MO
Yeah and then they send you one that is too short, so you have to wait another 2-3 so you can get another to come in...
Old 12-03-2007 | 03:32 PM
  #7  
6SPD02SE's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2007
Posts: 283
From: Lancaster, PA
I think the only place to get them is the Nissan dealer. Unless you are lucky enough to find one in a junk yard.
Old 12-03-2007 | 08:20 PM
  #8  
Devious 02 max's Avatar
-Devi0uz-
iTrader: (2)
 
Joined: Sep 2005
Posts: 111
From: sicklerville
Originally Posted by 6SPD02SE
I think the only place to get them is the Nissan dealer. Unless you are lucky enough to find one in a junk yard.
ive had this problem on my previous max..one axle was too long one was too short...and nissan wants 600+ for a dam axle..but i now have the same problem with my new 03 6-speed max and i got put onto raxle axles and to me thats your best bet..and they have a lifetime warrenty . and the price of our axles are 199 a piece so 199 compared to dealer 600+ im gonna have to go with raxles...also u have to be careful with buying an axle from a totaled max cuz u really never know if its good or if its about to go bad...but whatever u choose good luck ....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
papo99
5th Generation Classifieds (2000-2003)
0
08-09-2015 07:24 AM
ZerotoSixty
5th Generation Maxima (2000-2003)
11
08-06-2015 04:34 AM
RealityCheck
4th Generation Maxima (1995-1999)
2
08-05-2015 06:18 AM
BassAddictJ
7th Generation Maxima (2009-2015)
5
08-04-2015 11:38 AM



Quick Reply: WTB: Passenger side axle for 02-03 Maxima MT



All times are GMT -7. The time now is 03:26 PM.