F/S Complete Zex Dry Kit nitrous Oxide with pics
Thread Starter
Joined: Jul 2002
Posts: 857
From: Spring Hill FL
F/S Complete Zex Dry Kit nitrous Oxide with pics
F/S Complete Zex Dry Kit nitrous Oxide
Price dropped to 325.00 shipped! Dropped 300.00 Shipped this is a great KIT! some one buy it just sitting in the garage!
I took pictures with it on the car. Will take it off once someone purchases it.
Up to 75 shot....
Selling for 350.00 All you need for this kit is the Nozzle that go's in the the throttle body with the line. Its 25.00 dollars on zex's website...
Comes with 15lb. Bottle
All lines and solenoid pack. You need to purchase a new Nozzle from zex for 25.00 and a 2 dollar switch.
This dry kit put my automatic maxima with just a y pipe and intake in the 14's
I"ve run a 14.0 at 100 mph on street tires with a 65 shot. Without zex I ran a 15.3 at 92 mph
Done multiple runs between 14.0-14.2... If you were to get better tires than I had you would be in low to mid 13's...
I take paypal and have a great trader rating. My email for payment is austin77242000@yahoo.com.
Take it before someone gets it.


Price dropped to 325.00 shipped! Dropped 300.00 Shipped this is a great KIT! some one buy it just sitting in the garage!
I took pictures with it on the car. Will take it off once someone purchases it.
Up to 75 shot....
Selling for 350.00 All you need for this kit is the Nozzle that go's in the the throttle body with the line. Its 25.00 dollars on zex's website...
Comes with 15lb. Bottle
All lines and solenoid pack. You need to purchase a new Nozzle from zex for 25.00 and a 2 dollar switch.
This dry kit put my automatic maxima with just a y pipe and intake in the 14's
I"ve run a 14.0 at 100 mph on street tires with a 65 shot. Without zex I ran a 15.3 at 92 mph
Done multiple runs between 14.0-14.2... If you were to get better tires than I had you would be in low to mid 13's...
I take paypal and have a great trader rating. My email for payment is austin77242000@yahoo.com.
Take it before someone gets it.


Last edited by Timz96SE; Jul 29, 2010 at 08:22 PM.
Thread Starter
Joined: Jul 2002
Posts: 857
From: Spring Hill FL
s
the instructions tell you how to install the zex kit which you split into the fuel line... which in turn routes thru the soleniod pack. Depending on how much fuel pressure is in the system you are safe up to a 75shot in the 4th gen.
the instructions tell you how to install the zex kit which you split into the fuel line... which in turn routes thru the soleniod pack. Depending on how much fuel pressure is in the system you are safe up to a 75shot in the 4th gen.
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Joined: Jan 2008
Posts: 3,468
From: Greensboro, NC
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Joined: Jan 2008
Posts: 3,468
From: Greensboro, NC
well as far as I know, both dry and wet kits have nozzles before the TB, but the wet kit has both a nitrous solenoid (nozzle) and a fuel solenoid (nozzle) that comes from a T in the fuel line. I'm just not sure how the dry kit provides fuel as the reason it's called "dry" is because it doesn't add fuel with a solenoid like the wet kit does.
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Joined: Jan 2008
Posts: 3,468
From: Greensboro, NC
Nevermind, I got the answer I was looking for.
As I thought, Timz96se is completely incorrect. In a WET nitrous system, extra fuel is introduced with a T in the fuel line and put into the intake manifold along with the nitrous.
In a dry nitrous system, extra fuel required is introduced through the fuel injectors, keeping the manifold dry of nitrous. This property is what gives the dry system its name. Fuel flow can be increased either by increasing the pressure in the fuel injection system, or by modifying the vehicle's computer to increase the time the fuel injectors remain open during the engine cycle. This is typically done by spraying nitrous past the mass airflow sensor (MAF), which then sends a signal to the vehicle's computer telling it that it sees colder denser air, and that more fuel is needed. This is typically not an exact method of adding fuel. Once additional fuel has been introduced, it can burn with the extra oxygen provided by the nitrous, providing additional power.
Dry nitrous systems rely on a single type nozzle that only sprays nitrous through it, not nitrous and fuel. These nitrous nozzles generally spray in a 90 degree pattern.
So with all this stated, are you now saying that you are selling a wet kit? Because if you are putting a T in your fuel line, and running it through a solenoid with the nitrous, then that is technically a WET nitrous kit.
In a dry nitrous system, extra fuel required is introduced through the fuel injectors, keeping the manifold dry of nitrous. This property is what gives the dry system its name. Fuel flow can be increased either by increasing the pressure in the fuel injection system, or by modifying the vehicle's computer to increase the time the fuel injectors remain open during the engine cycle. This is typically done by spraying nitrous past the mass airflow sensor (MAF), which then sends a signal to the vehicle's computer telling it that it sees colder denser air, and that more fuel is needed. This is typically not an exact method of adding fuel. Once additional fuel has been introduced, it can burn with the extra oxygen provided by the nitrous, providing additional power.
Dry nitrous systems rely on a single type nozzle that only sprays nitrous through it, not nitrous and fuel. These nitrous nozzles generally spray in a 90 degree pattern.
So with all this stated, are you now saying that you are selling a wet kit? Because if you are putting a T in your fuel line, and running it through a solenoid with the nitrous, then that is technically a WET nitrous kit.
Last edited by sparks03max; May 28, 2008 at 06:41 PM.
Thread Starter
Joined: Jul 2002
Posts: 857
From: Spring Hill FL
Nevermind, I got the answer I was looking for.
As I thought, Timz96se is completely incorrect. In a WET nitrous system, extra fuel is introduced with a T in the fuel line and put into the intake manifold along with the nitrous.
In a dry nitrous system, extra fuel required is introduced through the fuel injectors, keeping the manifold dry of nitrous. This property is what gives the dry system its name. Fuel flow can be increased either by increasing the pressure in the fuel injection system, or by modifying the vehicle's computer to increase the time the fuel injectors remain open during the engine cycle. This is typically done by spraying nitrous past the mass airflow sensor (MAF), which then sends a signal to the vehicle's computer telling it that it sees colder denser air, and that more fuel is needed. This is typically not an exact method of adding fuel. Once additional fuel has been introduced, it can burn with the extra oxygen provided by the nitrous, providing additional power.
Dry nitrous systems rely on a single type nozzle that only sprays nitrous through it, not nitrous and fuel. These nitrous nozzles generally spray in a 90 degree pattern.
So with all this stated, are you now saying that you are selling a wet kit? Because if you are putting a T in your fuel line, and running it through a solenoid with the nitrous, then that is technically a WET nitrous kit.
As I thought, Timz96se is completely incorrect. In a WET nitrous system, extra fuel is introduced with a T in the fuel line and put into the intake manifold along with the nitrous.
In a dry nitrous system, extra fuel required is introduced through the fuel injectors, keeping the manifold dry of nitrous. This property is what gives the dry system its name. Fuel flow can be increased either by increasing the pressure in the fuel injection system, or by modifying the vehicle's computer to increase the time the fuel injectors remain open during the engine cycle. This is typically done by spraying nitrous past the mass airflow sensor (MAF), which then sends a signal to the vehicle's computer telling it that it sees colder denser air, and that more fuel is needed. This is typically not an exact method of adding fuel. Once additional fuel has been introduced, it can burn with the extra oxygen provided by the nitrous, providing additional power.
Dry nitrous systems rely on a single type nozzle that only sprays nitrous through it, not nitrous and fuel. These nitrous nozzles generally spray in a 90 degree pattern.
So with all this stated, are you now saying that you are selling a wet kit? Because if you are putting a T in your fuel line, and running it through a solenoid with the nitrous, then that is technically a WET nitrous kit.
What you have to understand is you "T into the Fuel line" then you route the fuel line thru the SMART BOX... Which is called the Soleniod pack on a "ZEX system". It measures the fuel pressure in the system by routing it thru there box. Also the nitrous line coming from the bottle is routed thru the soleniod pack and then routed to the front of the Throttle Body. Which is only one nozzle that provides the dry nitrous to the intake manifold. I never said you have to provide fuel thru the throttle body. I said you have to route a fuel line thru the soleniod pack. I understand you may have misunderstood me. Because I wasn't very clear.
Last edited by Timz96SE; May 30, 2008 at 12:21 AM.
Thread Starter
Joined: Jul 2002
Posts: 857
From: Spring Hill FL
Here is one answer of why there fuel line is routed thru there soleniod pack.
What makes our dry manifold nitrous system work so well is that the fuel control circuit
references the actual bottle pressure to determine enrichment fuel needs. The other kits on the
market use fuel regulating systems that ignore bottle pressure entirely, thus producing a constant
level of fuel enrichment no matter how much nitrous is really going into the engine. Ours, in
contrast, is self adjusting within its operating range. This difference in approach allows our kit to
have optimum nitrous to fuel ratios at all bottle pressures. That is how we can give you more
horsepower per pound of nitrous and less chance of engine destroying detonationreferences the actual bottle pressure to determine enrichment fuel needs. The other kits on the
market use fuel regulating systems that ignore bottle pressure entirely, thus producing a constant
level of fuel enrichment no matter how much nitrous is really going into the engine. Ours, in
contrast, is self adjusting within its operating range. This difference in approach allows our kit to
have optimum nitrous to fuel ratios at all bottle pressures. That is how we can give you more
Thread Starter
Joined: Jul 2002
Posts: 857
From: Spring Hill FL
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
Joined: Jan 2008
Posts: 3,468
From: Greensboro, NC
Thanks for posting more info, I had actually researched the info and have been too lazy to post it up.
The only reason that you do a T in the fuel line for the "smart" dry system is so that it can monitor the fuel pressure while it increases/decreases the pressure via the factory FPR in accordance with bottle pressure.
When I asked you how it supplied fuel, you could have simply stated that the zex "smartbox" increases fuel pressure on the FPR whiel monitoring fuel pressure and only put a T in the fuel line to monitor the fuel pressure.
Sorry for being abrasive with you, but MOST dry nitrous systems are pretty unreliable and sort of "ghetto rig" the fuel addition in some way or another. It's good to see that zex has done it differently.
PMing you about your price, though... just as an FYI, not going to post it in open thread in respect of you as a seller.
The only reason that you do a T in the fuel line for the "smart" dry system is so that it can monitor the fuel pressure while it increases/decreases the pressure via the factory FPR in accordance with bottle pressure.
When I asked you how it supplied fuel, you could have simply stated that the zex "smartbox" increases fuel pressure on the FPR whiel monitoring fuel pressure and only put a T in the fuel line to monitor the fuel pressure.
Sorry for being abrasive with you, but MOST dry nitrous systems are pretty unreliable and sort of "ghetto rig" the fuel addition in some way or another. It's good to see that zex has done it differently.
PMing you about your price, though... just as an FYI, not going to post it in open thread in respect of you as a seller.
Thread Starter
Joined: Jul 2002
Posts: 857
From: Spring Hill FL
Thanks for posting more info, I had actually researched the info and have been too lazy to post it up.
The only reason that you do a T in the fuel line for the "smart" dry system is so that it can monitor the fuel pressure while it increases/decreases the pressure via the factory FPR in accordance with bottle pressure.
When I asked you how it supplied fuel, you could have simply stated that the zex "smartbox" increases fuel pressure on the FPR whiel monitoring fuel pressure and only put a T in the fuel line to monitor the fuel pressure.
Sorry for being abrasive with you, but MOST dry nitrous systems are pretty unreliable and sort of "ghetto rig" the fuel addition in some way or another. It's good to see that zex has done it differently.
PMing you about your price, though... just as an FYI, not going to post it in open thread in respect of you as a seller.
The only reason that you do a T in the fuel line for the "smart" dry system is so that it can monitor the fuel pressure while it increases/decreases the pressure via the factory FPR in accordance with bottle pressure.
When I asked you how it supplied fuel, you could have simply stated that the zex "smartbox" increases fuel pressure on the FPR whiel monitoring fuel pressure and only put a T in the fuel line to monitor the fuel pressure.
Sorry for being abrasive with you, but MOST dry nitrous systems are pretty unreliable and sort of "ghetto rig" the fuel addition in some way or another. It's good to see that zex has done it differently.
PMing you about your price, though... just as an FYI, not going to post it in open thread in respect of you as a seller.
Thread
Thread Starter
Forum
Replies
Last Post
derekinthez
7th Generation Classifieds (2009-2015)
2
Nov 13, 2022 04:00 PM
The Frye
7th Generation Maxima (2009-2015)
6
Sep 2, 2021 11:03 AM
t6378tp
4th Generation Classifieds (1995-1999)
11
Sep 29, 2018 04:27 PM
markevans999
3rd Generation Maxima (1989-1994)
7
Sep 10, 2015 04:29 PM




