I will check the motor tonight and see what part of that I have. Will get back to you.

 

How much for the center console plastic vent cover? I want to replace my stock with your silver-painted cover. Can paypal, live in Raleigh, NC.

 

sent pm.

 

Anything?

 

Do you know if this is on the main harness or if there's a secondary harness for it? I have the fuel rail, but not sure exactly which part you will be needing. Any pics or a diagram would help.

 

I need the 3 plugs circled in red below, along with the 3 under the intake manifold connected to the rear fuel injectors. Basically, I just need the 6electrical plugs to the fuel injectors, along with a decent amount of leadwire to each, so I can solder them into a new harness. Ready to purchase. Thanks.

 

Got ya.

 

Didn't I buy the full engine control harness from that car? If so, then those injector connectors are on my harness.

BTW, I need the two o2 sensors that are further down the exhaust stream. They are called "Oxygen Sensor #2 Bank 1" and "Oxygen Sensor #2 Bank 2". I don't need the ones that are in the stock exhaust manifolds up close to the heads.

Give me a call back on my cell as soon as you know. Thanks.

 

Yeah, I told P they were on the main harness, also, I believe we're keeping the O2's to ourselves, but maybe we can work something special out for you buddy...

 

That would be awesome if you guys can help me out ONCE AGAIN.

I called P a little while ago and left a voicemail asking about them and then I noticed this thread.

I am also in need of a midpipe to connect my TB to MAF. I'd prefer if it was a decent aftermarket piece so I can easily tap my nitrous nozzle in it.

 

Well that sucks, I've been trying to find these damn connectors for months...

 

Sorry man. I have a QR25DE engine harness here and was hoping that some of the injector connectors were on it, but it's not. Those 4 connectors must be on a subharness connector. And I couldn't find any other connectors on that harness that would work for you. I also have 3 VQ35DE injector connectors that came on my engine from the salvage yard when they cut the engine control harness. But they cut those 3 connectors flush with the connector!

I wish I could help ya, but I got nothing. Sorry.

 

No problem Aaron, thanks for looking.

 

Hey guys. I'm going to my motor now and verifying for sure. You guys might be right, and they might be on the main harness, but I thought that there was a secondary harness for these. I'll check and report back for sure.

 

how much for the driver door window regulator and motor

shipped to: J4Y3C9 Canada?

 

The harness I bought from you has 3 LH injector connectors. But the RH injector subharness is still on your car I bet. It is the same exact stretch of wire that has the oil pressure switch connector and is attached to the bracket for the EVAP solenoid.

So you should have 3 of the connectors he needs.

 

Hi, do you still have the shifter assembly? Will you separate it out or must you sell the entire assembly together?

Thanks,
Mike

 

that went with the car, sorry.

 

This is confirmed. I do have only 3 of these connectors. The other 3 are on your main harness. Thanks Aaron.

 

I think that went with the car as well, but let me check.

 

Hi. I am in need of some brake dust. Preferably from rotors that were warped.

 

$425.00 Shipped for the brake dust. I'll throw in the warped rotors for free. Shoot me a paypal and I'll get these right out to you. Thanks.

 

Do you have a front lic plate holder to 21234

 

not available, sorry

 

You wouldn't happen to have a spare o2 sensor connector, would you? I need the male connector that goes on the sensor itself. I would prefer that this came off a bad o2 sensor. I just need the pigtail.

Edit: Here's the connector I need:

 

how about the grill to 21234?

 

Need mud guards...look at the red circles. Let me know if you still have any. Ship to 06269.

 

We spoke on the phone. Thanks bud.

That is no longer available. Sorry

Shot you a pm. Thanks.

 

Is the tail light harness available and if so how much shipped 07018?

 

how much for the headunit, fit kit, and harnesses to 02478

 

Hey man, I need these:
http://forums.maxima.org/5th-generat...ml#post6977920
Please let me know if you have them.

 

PM Sent

The one in this thread is not available, but I have and Eclipse 6610 for sale if you're interested.

This isn't available anymore. Sorry.

 

front turn signal harness if you wanna cut it off for me! thanks

 

Car is now gone, but have other parts available. These were cut off for someone already. Sorry.

 

I have 2 of these, one brand new and one used. Pm me an offer, shipping from toronto Ontario

 

Passenger front seatbelt assembly?

 

That has been sold. Sorry.

 

Do you have the driver side mirror glass?

 

That's gone mang. Sorry.

 

any prts offff the the motor still availible.. need the coolant like.. the on right undrerneath the o2 sensors