5th Generation Classifieds (2000-2003) Buy, sell, trade parts for 2000-2003 Maximas

2000 Nissian Maxima Complete Part Out Cheap!!

Thread Tools
 
Search this Thread
 
Old 02-09-2010 | 04:18 PM
  #81  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
^ what dose it look like?
Old 02-09-2010 | 05:14 PM
  #82  
00GreenMax's Avatar
Junior Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 15
From: RI
Looking for a fuel door.
Old 02-09-2010 | 05:51 PM
  #83  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
i have it let me know if u want it

email me at dave_ramkumar@yahoo.com
Old 02-09-2010 | 05:57 PM
  #84  
wsrivers's Avatar
Member
iTrader: (2)
 
Joined: Aug 2007
Posts: 271
From: New Jersey
2 transmission line adapter

they are located on the bottom of the radiator and there are 2 hoses that run from the tranny to these adadpters.


Old 02-09-2010 | 06:02 PM
  #85  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
^ pic wont show
Old 02-09-2010 | 06:49 PM
  #86  
BlueFusion6851's Avatar
Junior Member
iTrader: (1)
 
Joined: Feb 2009
Posts: 27
From: Sartell, MN
If you replace your rear license plate lights, theres a lense held onto a plastic thing.... I don't know how else to describe it. Open your trunk and look above the license plate, you see two clear lenses with screws holding them on? I want the lense and what they're screwed into, those things hold the 194 license plate bulb.
Old 02-09-2010 | 07:30 PM
  #87  
wsrivers's Avatar
Member
iTrader: (2)
 
Joined: Aug 2007
Posts: 271
From: New Jersey
Emailed pictures to you.
Old 02-09-2010 | 08:37 PM
  #88  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
Originally Posted by BlueFusion6851
If you replace your rear license plate lights, theres a lense held onto a plastic thing.... I don't know how else to describe it. Open your trunk and look above the license plate, you see two clear lenses with screws holding them on? I want the lense and what they're screwed into, those things hold the 194 license plate bulb.
ok ill check it out in the morning
Old 02-09-2010 | 09:08 PM
  #89  
BlueFusion6851's Avatar
Junior Member
iTrader: (1)
 
Joined: Feb 2009
Posts: 27
From: Sartell, MN
thanks!
Old 02-10-2010 | 08:45 AM
  #90  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
snow is causing some delays sorry guys,will get on it asap
Old 02-11-2010 | 06:40 AM
  #91  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
bump
Old 02-11-2010 | 07:12 AM
  #92  
hove75's Avatar
Junior Member
iTrader: (2)
 
Joined: Jun 2007
Posts: 89
From: nyc
do u have the arm rest?
Old 02-11-2010 | 01:34 PM
  #93  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
yes have the top part and the bottom try but i dont thave the plastic part with the hinge
Old 02-11-2010 | 08:39 PM
  #94  
augiedog964's Avatar
Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 197
From: Swedesboro, New Jersey
Precats?

Is this a cali spec or a fed spec? If you didn't have a P0430/P0420 cel and you are a cali spec I will take both precats and the o2 sensors. Let me know by PM.
Old 02-11-2010 | 10:19 PM
  #95  
wsrivers's Avatar
Member
iTrader: (2)
 
Joined: Aug 2007
Posts: 271
From: New Jersey
How bout those tranny line adapters?
Old 02-12-2010 | 07:16 AM
  #96  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
what do they look like?
Old 02-12-2010 | 07:16 AM
  #97  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
Originally Posted by augiedog964
Is this a cali spec or a fed spec? If you didn't have a P0430/P0420 cel and you are a cali spec I will take both precats and the o2 sensors. Let me know by PM.
do u know how i can check that?
Old 02-13-2010 | 05:31 AM
  #98  
SoulEater's Avatar
Senior Member
iTrader: (7)
 
Joined: Mar 2007
Posts: 510
From: Queens, NY
Emailed
Old 02-13-2010 | 11:25 AM
  #99  
ericsl2's Avatar
Member
 
Joined: Feb 2010
Posts: 34
From: Spangdahlem air base germany ZIP 09123
As soon as I reach 15 replies and can post my own thread ill have a 2000 maxima SE for partout, blown engine and im at an APO address so I cant get an engine here easily.
Old 02-13-2010 | 11:26 AM
  #100  
ericsl2's Avatar
Member
 
Joined: Feb 2010
Posts: 34
From: Spangdahlem air base germany ZIP 09123
Im working my way up to 15. By the way, sorry to crap on your thread here with all these nonsense posts.
Old 02-13-2010 | 12:06 PM
  #101  
Lontar1's Avatar
Puerto Rico-Maxima Lover
iTrader: (5)
 
Joined: Apr 2004
Posts: 4,772
From: Florida
looking for the cable that holds the Glove box and slows it down. It is behind the glove box. If you need better detail on it let me know
Old 02-13-2010 | 09:42 PM
  #102  
2mymax's Avatar
Junior Member
 
Joined: Feb 2010
Posts: 15
From: Glen Burnie ,Maryland
do you still have the fogs if so do they fit 03?
Old 02-13-2010 | 10:19 PM
  #103  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
Originally Posted by Lontar1
looking for the cable that holds the Glove box and slows it down. It is behind the glove box. If you need better detail on it let me know
im gona check it out and get back to u, i think i know what ur talking about
Old 02-14-2010 | 06:00 AM
  #104  
bulletspike's Avatar
Supporting Maxima.org Member
iTrader: (5)
 
Joined: Jul 2003
Posts: 115
From: Arlington, VA
PM sent.
Old 02-14-2010 | 09:48 AM
  #105  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
FOGS SOLD!!
Old 02-15-2010 | 03:05 AM
  #106  
noncentric's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 4
From: Seattle, WA
Hi, I'm looking for the engine cover plate...the one that says 'Nissan V6' on it and covers the front 3 ignition coils. I could also use a passenger side rear sidemarker.

Do you have either/both of these? If so, then how much shipped to 98116?

Thanks!
Old 02-15-2010 | 08:59 AM
  #107  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
i dont have the rear sidemarkers sorry, and ill check about the engine cover
Old 02-15-2010 | 12:21 PM
  #108  
noncentric's Avatar
Newbie - Just Registered
 
Joined: Feb 2010
Posts: 4
From: Seattle, WA
Sorry, didn't see the earlier posts about the sidemarkers. Did you happen to have any rear (closest to front windshield) ignition coils available? I could use one of those as well.
Old 02-15-2010 | 03:58 PM
  #109  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
can u send a pic of what u need to my email dave_ramkumar@yahoo.com

it would be a big help since i dont know what ur talking about
Old 02-15-2010 | 04:57 PM
  #110  
Lontar1's Avatar
Puerto Rico-Maxima Lover
iTrader: (5)
 
Joined: Apr 2004
Posts: 4,772
From: Florida
Originally Posted by dave_ramkumar
can u send a pic of what u need to my email dave_ramkumar@yahoo.com

it would be a big help since i dont know what ur talking about
was that for me?
Old 02-15-2010 | 05:07 PM
  #111  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
Originally Posted by Lontar1
was that for me?
i found what u need already, but im not sure i want to sell it alone, cuz then no one will want to buy the box, make me a offer on the rope thing and ill reconsider
Old 02-15-2010 | 06:35 PM
  #112  
atlantagraves's Avatar
Member
iTrader: (3)
 
Joined: Sep 2009
Posts: 35
From: SC
do you still have the mats?
Old 02-15-2010 | 07:08 PM
  #113  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
yes
Old 02-15-2010 | 08:48 PM
  #114  
n8.'s Avatar
n8.
Newbie - Just Registered
iTrader: (1)
 
Joined: May 2006
Posts: 14
In the picture of the steering wheel it looks like the a-pillar panel is tan... If so, how much for that panel shipped to 87123? Driver side only.

(and is it in pretty good condition?)

Thanks.
Old 02-15-2010 | 09:26 PM
  #115  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
Originally Posted by n8.
In the picture of the steering wheel it looks like the a-pillar panel is tan... If so, how much for that panel shipped to 87123? Driver side only.

(and is it in pretty good condition?)

Thanks.
ill remove it 2morrow and send u pics if ur serious email me @ dave_ramkumar@yahoo.com
Old 02-15-2010 | 11:57 PM
  #116  
akaslick25's Avatar
Newbie - Just Registered
 
Joined: Oct 2009
Posts: 2
ay bro u got the ECU how much shipped to 60645 and how many miles u got on your car
Old 02-16-2010 | 05:33 AM
  #117  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
^do u know where its located in the car? the car has 200 k miles ,i can do a $120 shipped to your zip code
Old 02-16-2010 | 04:19 PM
  #118  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
FOR FASTER REPLYS PLEASE EMAIL ME WITH THE PART THAT YOU WANT THX
Old 02-17-2010 | 07:12 AM
  #119  
dave_ramkumar's Avatar
Thread Starter
Senior Member
iTrader: (11)
 
Joined: Feb 2010
Posts: 377
From: South Ozone Park, NY
bump
Old 02-17-2010 | 09:16 AM
  #120  
BlueFusion6851's Avatar
Junior Member
iTrader: (1)
 
Joined: Feb 2009
Posts: 27
From: Sartell, MN
YEAH! License plate lights sold

Thanks dave!


Quick Reply: 2000 Nissian Maxima Complete Part Out Cheap!!



All times are GMT -7. The time now is 05:24 AM.