Let me know anything u need from a factory engine. Coil packs, steering pump, AC condenser etc. I also have the axles, the passenger side was recently changed. The short block is in good condition, but the head has valve damage. Post it and and make me an offer via pm. Engine cover also.

 

Are you parting just the motor? I'm looking for the bracket that holds the hood. Its connected by one bolt at the bottom and I need the whole bracket. Has to be like a pound or 2. If possible that would be good

 

U need both sides of the bracket??? I think my friend has them. pm me

 

where are you located?

 

Are you selling the Pre-cats? if so how much for the rear one by the fire wall (bank 1) how many miles on them ... Shipping to Ontario Canada, L7R 3T8

 

No cats...sorry

 

how much for ignition coils to 19145

 

How many miles are on the motor? How are the rods and crank? Price for them both.

 

In Georgia

 

Pm'ed

 

condition of oil motor oil pan and ac condenser? pic for oil pan please..

shipped to 11367 commercial address

 

Is this auto or MT
-if this is MT how much for the Passenger side axel shipped to Ontario Canada ?

 

Oil pan and A/C condenser are in good shape. I will get pics for you tomorrow. $115 for both shipped

$45 shipped

 

yeah in for the upper oil pan how much for this?

 

Are you selling headlight wire harness connectors or the headlight clips?

 

Might have to wait till the weekend on those.

 

Everyone shipped out. Forgot I also have a used NWP spacer kit for the 3.5.

 

ok

forget about ac condenser, I'll get it locally, just too big too get it shipped

just need lower oil pan and also forgot to ask if you have tensioner pulley?

thanks

 

How much for the engine cover shipped to 31410, or how far from sav r u?

 

assuming upper oil pan is gone?

 

Any word on the ignition coils, from the 2002 engine?

 

any news on requested parts?

lower oil pan and tensioner pully?

 

Bump, what's the word on the ignition coils for the 3.5?

 

bought a 02/03 maf from dude, this fool sent me a 00 model maf and refused a refund, went to paypal, his response was no refund because i couldve swapped the sensors inside the housing... wtf

 

The IAT wire found on the 2002-2003 MAF can be removed then installed onto a 2000-2001 MAF. I bought a new 2000 maf from the dealer and swapped the IAT wire, plus a little solder to hold it in place.. and everything still works after 3-4 months.

 

interested in the nwp spacers if they're in good shape, pics and a quote would be good asap

possibly the entire intake manifold depending on price, (LIM/UIM/Elbow), and throttle body

like i said, pics would be great for me to see to help me feel better about the condition of everything

 

Still have the MAF?? I'll take if it pm me plz