1. 00-01 Maxima headlight retrofit. This is my current setup but wanting to do something else. The retro was done in the summer with custom sheilds, CF vinyl and stuff (check out my build thread for the whole process). Since then I've taken it apart few times for experiments. The housings are Ebay and the lens are OEMs. Driver side lens was restored to get the shine back but passenger side didn't turn out so well. Projectors are E46 Bi-X with stock shield now and painted red, it still has clear lens which maintained the sharp cut off. It's got CCFLs angle eyes behind the Gatlin Gun Shroud but the driver side stop working (inverters are not included). This retrofit is not as fresh as the others but is in decent shape. You can get new lens and it will look really good. I was going to save the projectors and use it for future, but I don't want to take it apart anymore. $210 FIRM + shipping to lower US
The Aluminum tape is no lenger there. It was temporary untill I applied Silicone.
2. Selling a used 02-03 OEM driver side headlight lens in decent condition. Lens is in good shape with few scrathes, scartter haze but not too much. The internals are gutted out, but the turn signals are intact. This would be perfect for retofit practice. $20 + shipping. I have the back cap also. SOLD
The Aluminum tape is no lenger there. It was temporary untill I applied Silicone.
2. Selling a used 02-03 OEM driver side headlight lens in decent condition. Lens is in good shape with few scrathes, scartter haze but not too much. The internals are gutted out, but the turn signals are intact. This would be perfect for retofit practice. $20 + shipping. I have the back cap also. SOLD
Senior Member
May be interested in that driver side light in jan.
Come on guys. If you send me your stock 00-01 headlights as long as they are in decent shape with minimum haze only I'll make you a deal on the cash trade in
Senior Member
So dont know if you have them or not I need the little clear bezels inside of the 5.5 Gen headlight. The one right above the amber ones the smaller of the two. Previous owner put high wattage bulbs and melted them 
say 10$ shipped Pm me yes or no
say 10$ shipped Pm me yes or no
Senior Member
^^^ sorry I need both sides to be clear.
I only have driver side. Just the clear lens right not the figure "8" bezel. Sure $10 shipped.
More picts.
This is at 40'. It's rainy and cloudy night. Cut off is actually much better in person. That hot spot in the middle is what makes this projector so good at distance lighting. A little different beam pattern than FX-Rs where the hot spots spread to the side so the width is more, but the intensity in the middle is less resulting in less distance throw. I guess its a trade off. E46 shield stock shield is also not flat as you can tell from the picture. center section is higher than the rest. This helps your eyes to focus on the road more than other direction, very much needed when you are in highway speed.
This is at 40'. It's rainy and cloudy night. Cut off is actually much better in person. That hot spot in the middle is what makes this projector so good at distance lighting. A little different beam pattern than FX-Rs where the hot spots spread to the side so the width is more, but the intensity in the middle is less resulting in less distance throw. I guess its a trade off. E46 shield stock shield is also not flat as you can tell from the picture. center section is higher than the rest. This helps your eyes to focus on the road more than other direction, very much needed when you are in highway speed.
Senior Member
Quote:
I would but I would like to get both at tie same time if possibleOriginally Posted by MSU2000
I only have driver side. Just the clear lens right not the figure "8" bezel. Sure $10 shipped.
Member
Bump for a great seller. Very honest and informative. I'm really loving my retrofits.
Last call. $210 (firm) + shipping
Projectors + clear lens $110
Headlights $60
Shrouds: $25
Paints + hadwares $15
Hours and hours of labor = Free.
EBAY projector style headlights is between $220-250 shipped and you know what the output is.
Projectors + clear lens $110
Headlights $60
Shrouds: $25
Paints + hadwares $15
Hours and hours of labor = Free.
EBAY projector style headlights is between $220-250 shipped and you know what the output is.
Junior Member
Quote:
I got some Ebay projector headlights sitting in the garage. Any interests in trading for that? Cash on my end of course.Originally Posted by MSU2000
Come on guys. If you send me your stock 00-01 headlights as long as they are in decent shape with minimum haze only I'll make you a deal on the cash trade in
Quote:
Already bought ebay headlights, so cash only please.Originally Posted by whiteghost
I got some Ebay projector headlights sitting in the garage. Any interests in trading for that? Cash on my end of course.
Senior Member
Someone get these beautiful headlamps!
Weekend bump.
It's been dumping rain here in Southwest WA for a 5 days straight. Took a 4 hours trip in rain and snow the other day and headlights were holding up good. No leak, no fogging, still put tons of light even in heavy reain condition.
It's been dumping rain here in Southwest WA for a 5 days straight. Took a 4 hours trip in rain and snow the other day and headlights were holding up good. No leak, no fogging, still put tons of light even in heavy reain condition.