CT Pearl White 5th Gen 5 Speed Partout
#1
Pearl White 5th Gen 5 Speed Partout
Hi guys, so I've been on the fence for a while now but it's time to let this car go. The clutch went and I don't feel like putting any more time or effort into this car.
Car is pearl white, manufacture date is November 1999, federal spec, Manual trans SE model
Items are located in Shelton, CT/Norwalk, CT (new address)
I can be reached at (860) 823-8101
Larger items CAN be shipped (engine, trans etc) but the costs are rather high and would be on the buyer. All other items include shipping!
Parts that are immediately available:
Arm rest for 5-5.5 Gen in dark grey-$50.00
Parts soon to be available with pricing, just have to move my car to the new house:
Parts For Sale Price
A/C Vent-35
Arm rest lid gray-50
Center Console/Climate control sold
Gauge Cluster 220k $60.00 SES light works lol
Front Door L, with door cards $75.00 with motor and regulator
Front Door R, with door cards $75.00 with motor and regulator
Rear Door L, with door cards $50.00 with motor and regulator
Rear Door R, with door cards $50.00 with motor and regulator
Window motor and regulator 75 each
Mud Guards sold black unpainted
Wiper Motor $30.00
Radiator $50.00 only 3 months old prior to part out
Inside Mirror $10.00
Ebrake Handle $10.00
Mirrors sold
Bose $50.00 Head unit
Rear sub sold
Bose Amp-sold
Air bags $50.00 drivers side only available
Steering wheel $40.00
Seat Front Drivers sold
Seat front Passenger $40.00 **Picked up**
Rear Seat No good
Mats sold
Heated Seat Switches-40
Rear Trunk lid and spoiler--sold
Trunk light-sold
Front fender L $40.00 **Picked up**
Front fender R DS sold **Picked up**
Front bumper Sold **Picked up**Could use re-spray
Hood. Sold
Hood latch. Sold
Rear bumper sold
Headlights Sold Passenger side has a slight crack, never leaked
Tail Lights Sold
Side markers Front $25.00
Side markers rear $25.00 or 40 for both sets together
Engine $200.00 **Picked up** No intake manifold or coils-130K
Engine Exhaust Manifolds $50.00 or 25 each with newer felpro gaskets
Ignition Coils-100
Throttle Body-75
IACV pending
ECU sold 2000 Fed Spec SE Manual production date Nov 1999
Clutch Master and Slave sold
Shift rod/Linkage $50.00
Trans -sold 120K **Picked up price**
Shift **** sold AE shift **** in good shape
Starter sold
Wheels sold picked up *350Z track edition rays with tires could use refinishing, could be refinished have rash
Cat sold
AC compressor-$85.00
Upstream 02 Sensor-sold
Sensor after the cat-sold
Speed Sensor-sold on transmission
Speed sensor $25.00 Wheel well
Crank position $25.00
Cam position $25.00
Oil pressure $15.00
ABS sensor sold These are also being offered for sale with the spindles
Sensors $25.00 each
MAF $75.00 Newer
Brakes Front-sold
Brakes Rear $50.00 both calipers less than 2 years old as well as pads and rotors-slider pins were re-greased when changed
Brake Master cylinder $30.00
Steerings Rack-sold
Knuckle L-sold
Knuckle R sold with abs
Front Subframe $100.00
Motor MountsES pressed MMs-sold
Rear subframe Sold **Picked up**Good for someone doing the ES trialing arm upgrade.
Rear stub axles-sold
Brake Fluid Res $15.00
Coolant Res-$25.00
Washer Res -$30.00
Clutch Fluid Res $15.00
Knight YYZ Mid-Piping $60 With couplings
JWT Popcharger with R2C-sold
Alternator Sold
Intake Manifold $80.00
Idler Pulley $40.00 4 months old-OEM
Power Steering Pump-sold
Power steering high pressure hose OEM-sold
Headlights sold
Fogs-sold
Axle -sold
Megan Exhaust sold full catback
Cattman Y-pipe sold
NWP Manifold spacers Sold
Suspension front/rear sold /Tokico Illumina front and OEM bushings, moog mounts, HP rear and eibach same
Progress sway bar sold great shape
Master switch $30.00
Door trim $75.00 Excellent shape! With switches!
Control Arms Sold ES control arms pressed into OEM arms W/Moog Endlinks
Per forum rules pics:
Car is pearl white, manufacture date is November 1999, federal spec, Manual trans SE model
Items are located in Shelton, CT/Norwalk, CT (new address)
I can be reached at (860) 823-8101
Larger items CAN be shipped (engine, trans etc) but the costs are rather high and would be on the buyer. All other items include shipping!
Parts that are immediately available:
Arm rest for 5-5.5 Gen in dark grey-$50.00
Parts soon to be available with pricing, just have to move my car to the new house:
Parts For Sale Price
A/C Vent-35
Arm rest lid gray-50
Center Console/Climate control sold
Gauge Cluster 220k $60.00 SES light works lol
Front Door L, with door cards $75.00 with motor and regulator
Front Door R, with door cards $75.00 with motor and regulator
Rear Door L, with door cards $50.00 with motor and regulator
Rear Door R, with door cards $50.00 with motor and regulator
Window motor and regulator 75 each
Mud Guards sold black unpainted
Wiper Motor $30.00
Radiator $50.00 only 3 months old prior to part out
Inside Mirror $10.00
Ebrake Handle $10.00
Mirrors sold
Bose $50.00 Head unit
Rear sub sold
Bose Amp-sold
Air bags $50.00 drivers side only available
Steering wheel $40.00
Seat Front Drivers sold
Seat front Passenger $40.00 **Picked up**
Rear Seat No good
Mats sold
Heated Seat Switches-40
Rear Trunk lid and spoiler--sold
Trunk light-sold
Front fender L $40.00 **Picked up**
Front fender R DS sold **Picked up**
Front bumper Sold **Picked up**Could use re-spray
Hood. Sold
Hood latch. Sold
Rear bumper sold
Headlights Sold Passenger side has a slight crack, never leaked
Tail Lights Sold
Side markers Front $25.00
Side markers rear $25.00 or 40 for both sets together
Engine $200.00 **Picked up** No intake manifold or coils-130K
Engine Exhaust Manifolds $50.00 or 25 each with newer felpro gaskets
Ignition Coils-100
Throttle Body-75
IACV pending
ECU sold 2000 Fed Spec SE Manual production date Nov 1999
Clutch Master and Slave sold
Shift rod/Linkage $50.00
Trans -sold 120K **Picked up price**
Shift **** sold AE shift **** in good shape
Starter sold
Wheels sold picked up *350Z track edition rays with tires could use refinishing, could be refinished have rash
Cat sold
AC compressor-$85.00
Upstream 02 Sensor-sold
Sensor after the cat-sold
Speed Sensor-sold on transmission
Speed sensor $25.00 Wheel well
Crank position $25.00
Cam position $25.00
Oil pressure $15.00
ABS sensor sold These are also being offered for sale with the spindles
Sensors $25.00 each
MAF $75.00 Newer
Brakes Front-sold
Brakes Rear $50.00 both calipers less than 2 years old as well as pads and rotors-slider pins were re-greased when changed
Brake Master cylinder $30.00
Steerings Rack-sold
Knuckle L-sold
Knuckle R sold with abs
Front Subframe $100.00
Motor MountsES pressed MMs-sold
Rear subframe Sold **Picked up**Good for someone doing the ES trialing arm upgrade.
Rear stub axles-sold
Brake Fluid Res $15.00
Coolant Res-$25.00
Washer Res -$30.00
Clutch Fluid Res $15.00
Knight YYZ Mid-Piping $60 With couplings
JWT Popcharger with R2C-sold
Alternator Sold
Intake Manifold $80.00
Idler Pulley $40.00 4 months old-OEM
Power Steering Pump-sold
Power steering high pressure hose OEM-sold
Headlights sold
Fogs-sold
Axle -sold
Megan Exhaust sold full catback
Cattman Y-pipe sold
NWP Manifold spacers Sold
Suspension front/rear sold /Tokico Illumina front and OEM bushings, moog mounts, HP rear and eibach same
Progress sway bar sold great shape
Master switch $30.00
Door trim $75.00 Excellent shape! With switches!
Control Arms Sold ES control arms pressed into OEM arms W/Moog Endlinks
Per forum rules pics:
Last edited by jtm02011; 06-25-2013 at 04:32 PM.
#9
willing to take the rear bumper to a grey hound bus station and ship it that way? all you have to do is wrap it in the clear sheeting stuff (celefane?) that people wrap stuff in for packing, stick an address label on it and they stick it under the bus with the luggage and i pick it up at the local terminal, i noticed you said it needed a re-spray, how bad is it? my bumper is KT3 color on a pearl white car (02 max) so anything is better than a silver bumper on a white car.
matthew
matthew
#17
Payment received!
Ha, Omar I know, I know. Just to many continual issues which is why 50% of the parts are like 6 months old or newer. You dip those 35's yet? I want to see
@ Brett, what's good man, how's that suspension riding? Shoot me a text And let me know, I have both items off the car and available if you're still looking.
All other PMs should be responded to. If not, please kindly resend (didn't mean to miss anyone)
Ha, Omar I know, I know. Just to many continual issues which is why 50% of the parts are like 6 months old or newer. You dip those 35's yet? I want to see
@ Brett, what's good man, how's that suspension riding? Shoot me a text And let me know, I have both items off the car and available if you're still looking.
All other PMs should be responded to. If not, please kindly resend (didn't mean to miss anyone)
#20
Hey man! PM sent regarding AE **** and armrest, I lost your #. As for the suspension... Its still not on!!! Wanted to get one last season out of my blizzaks, and sadly they'd rub with that drop. The suspension will be going on this spring however.
#22
Originally Posted by MaxxedOutt
Sent you pm for the y-pipe. Is it a cali, or fed spec?
#23
#31
has anyone got replies on anything from this thread? Im also interested in the rear swaybar providing the installation brackets are included.
if i could get the rear bumper also you could probably ship the swaybar inside the rear bumper (taped inside) and ship via greyhound.
matthew
if i could get the rear bumper also you could probably ship the swaybar inside the rear bumper (taped inside) and ship via greyhound.
matthew
#32
has anyone got replies on anything from this thread? Im also interested in the rear swaybar providing the installation brackets are included.
if i could get the rear bumper also you could probably ship the swaybar inside the rear bumper (taped inside) and ship via greyhound.
matthew
if i could get the rear bumper also you could probably ship the swaybar inside the rear bumper (taped inside) and ship via greyhound.
matthew
#33
has anyone got replies on anything from this thread? Im also interested in the rear swaybar providing the installation brackets are included.
if i could get the rear bumper also you could probably ship the swaybar inside the rear bumper (taped inside) and ship via greyhound.
matthew
if i could get the rear bumper also you could probably ship the swaybar inside the rear bumper (taped inside) and ship via greyhound.
matthew
Unfortunately for you, I already bought the sway bar...
He doesn't respond much on here, but if you noticed, he put his phone number on the op. He has responded very well by phone/txt.
#35
thanks for the responses guys, ill send him a text tomorrow to see if he's reconsidered shipping the rear bumper, ive got atleast 3 people wanting my KT3 rear bumper and id prefer to sell it to someone who can use one with original paint, and id much rather have a factory pearl white rear bumper.
matthew
matthew
#36
thanks for the responses guys, ill send him a text tomorrow to see if he's reconsidered shipping the rear bumper, ive got atleast 3 people wanting my KT3 rear bumper and id prefer to sell it to someone who can use one with original paint, and id much rather have a factory pearl white rear bumper.
matthew
matthew
#37
Hey sorry guys, haven't logged in in a while. Just shoot me a text or call me, my number is listed. Much easier for me to respond to texts since I work 8-6.
I've responded to all PMs and questions posted throughout this thread PM.
I've responded to all PMs and questions posted throughout this thread PM.
Last edited by jtm02011; 02-12-2013 at 08:57 AM.