Tein SA (Street Advance) Coilovers with spring rates 9kg front and 8kg rear for sale(I went with the stiffer springs because I like a stiffer ride). I also will ship the springs that came with them (7kg front and 6kg rear) for those folks who like soft plushy rides. The rears have BRAND NEW MOOG upper mounts, just put on about 2 weeks ago. Less than 2000 miles on the coils, practically brand new. $850 shipped. Also can include EDFC as well for a total of $1000 shipped. I will do a local pickup for $800 on the coils and $950 for everything.

will fit A33 Chassis. 00-03 Maximas and I believe I35s too.

 

How complicated is the edfc wire up?

 

Not complicated just need to splice into a 12kV wire and ground then another wire(I forgot which). The wiring for the motors was easy too. For the front just tap into the firewall and then from the rear run the wires under the sides where the door are just like when installing a stereo system. Just a matter of where you want the controller. I put mine in the glove box.

 

Thats cake. I could finally run my wiring for my amp at the same time! Ok. I gotta figure some **** out. This would be a nice comfy setup for me! I will let ya know

 

Alright bro. I came from Tokico Blues and Eibach springs. The standar springs were a bit too soft for me thats why I upgraded to the 9kg and 8kg...but if you want these I can send both so you can figure it out. I like a STIFF riding car...care about performance more than comfort. If I want comfort I'll drive my MDX...lol.

 

BUMP - will take $750 shipped for the coils and $950 shipped EVERYTHING!

 

I'm in the tri state and have cash in hand for the coilovers 3476507301

 

What is the difference between the classic Tein SS and these Tein SA?

IIRC SA is the updated version of SS?

why are you selling? what are you riding on now?

If I had more $$ i would def consider, pretty good dang deal, priced to sell!

 

Well here is the long story....

Bought the Teins and the stiffer springs and had a shop install them. The shop installed them wrong because they did not measure the distance of the ride height on each tire. They simply lined up each coil to match the same distance and installed. Anyone ever installed coils on our cars know that you cant do that because of the axle legnths being so different so the one side of the car was about 1-1.5" higher than the other side and the rear is the same way. So basically when I went to get my alignment the car was aligned as installed....CROOKED. when I would accelerate the car would pull hard to the right and all unstable. I thought it was the Teins that were garbage. So I ordered TDMI coils. But about a couple weeks later was measuring my wheels and noticed the pass side tire jacked significantly higher than the driver side.....so what I did was take each coil and lower them to match the same distance from top of the fender to the floor....car rode like butter. But had already placed order for TDMI. So I installed TDMI and dont need 2 sets...so decided to sell these. Nothing wrong with them...as long as they installed properly......I installed the TDMI coilovers and lined them up myself. Install coils so easy I was embarassed I paid to have them installed....oh well. These are good coils. Paid over $1600 for the whole system. Just want to get rid of them and use the money to pay for my vacation to the Dominican Republic...not tryin to rape no one.

 

The SA replsced the SS..new and improved.. Hes on tdmi coilovers...

 

I'll take them. What part of pa?

 

PM sent.
Seriously interested.

 

sold close thread

 

good job, they were priced to sell

someone is very very lucky