Zericmz

Name: Eric Meyer
Location: Nebraska, 68701
Item Needed: A braided/ss brake hose that runs from the clutch master cylinder straight to the slave cylinder. I have seen a few topics on this solution as to eliminate the need of the bleeder valve on the driver strut tower. I was hoping someone here would be able to make me one that has done it before. I will pay for whatever the supplies cost you + your time and shipping. If anyone is willing to do this for me, please let me know.

I also would be interested in an OEM CMC and Slave if anyone has a used one in working condition for a 2000-01 Maxima. I bought a perfection clutch mc and slave and I would prefer to put in an OEM set when I put in the bypass hose. Please pm me, leave a message here, or text me at 402- nine one zero-7760. Thanks guys!

Zericmz

Bump. That or can someone pm me with parts with the correct fitting sizes? I believe 10mm x 1' for the bolts that go into the master and the slave but I would like to double check. Would the size matter as well? 5/16th line or can I go a touch bigger/smaller (curious if the a slightly bigger line would give the pedal a stiffer feel, in my head I think so with more fluid in the line to be compressed but I don't think the feeling would be noticeable).