PA 02 max complete part-out!!! Step in and look!!
05-30-2014, 12:19 PM
#1
02 max complete part-out!!! Step in and look!!
I am parting out my car before it goes to the junkyard/scraps. I would really love to get rid of all this stuff LOCALLY, but some small items may be shipped on buyers expense. This is a 2002 maxima with 149k miles, and it's a 6 speed. ENGINE will not be sold, neither the harness or ECU. With that being, anything else you need is up for grabs just shoot me a PM. Now, I have the following aftermarket parts.. OBX headers, Megan racing catback, fidanza flywheel, and exedy stage 1 clutch... (flywheel and clutch never saw the road) installed, but technically brand new. STILLEN short ram intake (3k miles), radiator core support... I have more stuff, but can't quite think of all if it right now.
If you're asking why I'm parting out the car this is the answer. I removed the engine several months ago to repair a loud, rattle, clunking noise it had. When I took the timing case off I discovered that the guides were torn/broken and the chains were loose. I replaced the whole timing kit, purchased the flywheel and decided to purchased the headers, along with the clutch to improve the performance of the car... Turns out that the rattle was still there after the engine was installed.. My lost, your gain. I will take pictures of the flywheel and the clutch this Sunday when they came off. For a faster response jrios4u@gmail.com
OBX headers (never saw the streets, just a few start ups) - $300 pick up only or buyer pays an extra $50 for shipping
Megan racing catback with 15k miles on it, and a FREE Test pipe with purchased $180 LOCAL PICK UP ONLY
Fidanz lightweight flywheel $330 pick up, or an extra 35 for shipping
Exedy stage 1 clutch $330 pick up, or an extra 35 for shipping
Stillen intake 3k miles - $120 shipped
Radiator core support - $70 PICK UP ONLY
If you're asking why I'm parting out the car this is the answer. I removed the engine several months ago to repair a loud, rattle, clunking noise it had. When I took the timing case off I discovered that the guides were torn/broken and the chains were loose. I replaced the whole timing kit, purchased the flywheel and decided to purchased the headers, along with the clutch to improve the performance of the car... Turns out that the rattle was still there after the engine was installed.. My lost, your gain. I will take pictures of the flywheel and the clutch this Sunday when they came off. For a faster response jrios4u@gmail.com
OBX headers (never saw the streets, just a few start ups) - $300 pick up only or buyer pays an extra $50 for shipping
Megan racing catback with 15k miles on it, and a FREE Test pipe with purchased $180 LOCAL PICK UP ONLY
Fidanz lightweight flywheel $330 pick up, or an extra 35 for shipping
Exedy stage 1 clutch $330 pick up, or an extra 35 for shipping
Stillen intake 3k miles - $120 shipped
Radiator core support - $70 PICK UP ONLY
Last edited by colombian4u_61; 05-30-2014 at 12:25 PM.
05-31-2014, 03:11 AM
#8
megans cat back
Sorry I changed my mind to buy your stillen because I read on the forum that it is noisy when the car hit fast 4000 rpm. I live in NJ , police here might give a ticket. By the way I am interested on your megans catback, how much you want for it (shipped) . Email: macee149@gmail,com
05-31-2014, 12:27 PM
#9
The whole exhaust system is still available, lots of interest but nothing concrete. Let's make it happen. I'm willing to travel a few miles to meet up with folks from jersey or other areas around PA. Let's make it happen!!
06-05-2014, 08:46 AM
#19
are you willing to cut out the Coolant Temperature Sensor Wire Connector?
I replaced the radiator along with the coolant temp sensor but ended up breaking the tab on it. Its still snug in there but i’d like to replace it to make sure it locks in place safely. let me know if you are willing to just send out the clip shipped to Denver, CO 80205
Thanks
I replaced the radiator along with the coolant temp sensor but ended up breaking the tab on it. Its still snug in there but i’d like to replace it to make sure it locks in place safely. let me know if you are willing to just send out the clip shipped to Denver, CO 80205
Thanks
06-07-2014, 12:40 PM
#22
Sorry I changed my mind to buy your stillen because I read on the forum that it is noisy when the car hit fast 4000 rpm. I live in NJ , police here might give a ticket. By the way I am interested on your megans catback, how much you want for it (shipped) . Email: macee149@gmail,com
06-07-2014, 04:12 PM
#23
Intake, headers, and Megan catback are sold. I'm truly sorry for not replying back, I've been super busy with work and family issues. Steering wheel will not be sold. Anything else you guys need, please email me
Thread
Thread Starter
Forum
Replies
Last Post
markevans999
3rd Generation Maxima (1989-1994)
7
09-10-2015 04:29 PM
trungg86
4th Generation Maxima (1995-1999)
7
09-04-2015 04:58 AM