2002 SE Majestic Blue 6sp rebuilder or part out

Subscribe
Sep 4, 2016 | 12:22 PM
  #1  
Ok my beloved 2002 SE Majestic Blue 6sp was rearend-ed on the highway last week and was deemed totaled. I am trying to buy it back to sell as a running driving vehicle for someone who wants to try and straighten it out and have a great daily driver. I actually drove it off the highway and the only reason I had it towed was was the rear bumper was dragging against the rear tires. The car has 151K miles and I am the second owner purchasing it with 16K miles on it in 2004. The car has had nothing but Amsoil synthetics for the last 8+ years. The engine runs great and smooth and still gets 23-25mpg on the highway depending on speed. I do 95% of driving on the highway.
Here's the parts list of goodies I have on the vehicle:

1) recently installed 6sp WITH HLSD! Trans had 65K and I had cases separated and inside cleaned and inspected before install. 100% perfect and low mileage verified! with short throw shifter.

2) Full Cattman gen 2 exhaust which include the headers with brand new ceramic coating on headers and J-pipe, stainless Cattman metal cat, and the rest of the 2.75" Cattman exhaust to tailpipe. It may be bent, after cat, not sure at this point. I will verify.

3) Aluminum Jim Wolfe flywheel and 350z clutch setup.

4) Jim Wolf intake system, just installed after having it for 6+ years!

5) NWP intake spacers

6) The car has the subframe connectors welded in as well as the poly bushings on the transaxle mounts

7) front suspension was all rebuilt at 100K with new arms ball joints and poly bushings installed. Also had outer tie rods replaced.

8) I just had the front rad support replaced as well as complete new hubs and bearings installed.

9) New R-axles driver side axle installed and new full pass-side Napa axle installed as well

10)Rear suspension had poly bushings installed as well

11) Cattman rear sway bar installed, which I think is an Addco unit.

12) Cattman Titanium strut bar!!

13) Gen 4 red powder-coated front brake calipers and 12" slotted rotors
rear calipers are also red power-coated with slotted rotors

14) I still had my winter suspension on it which consists of factory springs and Tokico 5 way adjustable struts. factory 17" rims with snow tires.

15) I also have summer suspension which are K-sports coilovers and 19" blue powder coated and powered cleared color matched rims and Continentals Extreme DW tires in 255/30-19.

16) new radiator installed a month ago

17) new solid trunk floor by org member "djfrestyl"

There may be some other things but that's the majority of it of the "goodies". The rest of the car including the interior is good-great shape and intact. I had the typical rust over the rear wheels which was going to be taken care of this winter. The interior is black leather and in great shape except for the drivers seat which shows some wear. The car has all options except navigation. It also has the meridian package.
If I get a reasonable buy-back form my ins company, I will try selling the car complete first as I really do think it can be put back on the road by a decent body guy. If that doesn't work I will try to part it out.
If you are interested in buying the car complete, please send me a PM and I'll give you my email/phone # to talk about price.

Thanks for looking,
Tom
Reply
Sep 4, 2016 | 01:30 PM
  #2  
How much for the tranny? I would pick it up?
Edit just read the full thing (got exited) how much are you asking for?
Reply
Sep 5, 2016 | 09:31 AM
  #3  
Where are you located?
Reply
Sep 5, 2016 | 12:13 PM
  #4  
Location?
Reply
Sep 5, 2016 | 12:51 PM
  #5  
how much for the car
Reply
Sep 6, 2016 | 10:14 AM
  #6  
Hi Guys, The car is located in CT. It is currently at the repair shop I use in Windsor Locks. If someone wants the whole car, $2500 will buy it, otherwise I'll part it out. The summer wheels and K-sports are not included and but can be negotiated in. I can email pics of "after" accident and with summer suspension and wheels if you PM your email address.
Thanks!
Reply
Sep 6, 2016 | 04:43 PM
  #7  
If you end up parting out the car how much for the headlights and fog lights ?
Reply
Sep 6, 2016 | 07:14 PM
  #8  
JMAXIMA86 - If I end up parting it out I'll let you know.
Reply
Sep 6, 2016 | 07:25 PM
  #9  
Thanks man I appreciate it I'm right in plainville so it wouldn't be that far of a drive
Reply
Sep 6, 2016 | 08:35 PM
  #10  
Quote: 1) recently installed 6sp WITH HLSD! Trans had 65K and I had cases separated and inside cleaned and inspected before install. 100% perfect and low mileage verified! with short throw shifter.

12) Cattman Titanium strut bar!!

17) new solid trunk floor by org member "djfrestyl"
Dibs on these
Reply
Sep 7, 2016 | 09:07 AM
  #11  
How much for the k sports? I'm from CT as well
Reply
Sep 7, 2016 | 09:17 AM
  #12  
so are you parting out now? did you have black ES bushings in the rear trailing arms?
Reply
Sep 7, 2016 | 07:26 PM
  #13  
I will pick up that tranny if you part out... you will make more money parting put btw ill even go and take it out if i have to!
Reply
Sep 7, 2016 | 09:27 PM
  #14  
Sorry to hear about the car being hit. I'm interested in the exhaust. Keep me posted.
Reply
Sep 8, 2016 | 04:56 PM
  #15  
If part out is now an option, I'm interested in good and both fenders if in extremely clean condition. I work in Newington CT. Pm pics pls
Reply
Sep 8, 2016 | 06:00 PM
  #16  
Hi guys, I have a member who is interested in the whole car. If he doesn't buy it, YES I will part out just the good stuff in my list. I don't have the place to strip it and piece meal the smaller bits. My shop is going to do the big things like trans and exhaust and I'll get the easier stuff and the rest will go to the recycler.
Reply
Sep 11, 2016 | 02:32 PM
  #17  
Gimme a price on all the Cattman Stuff.
Reply
Sep 16, 2016 | 08:34 AM
  #18  
How many miles are on the K Sports?

Also how much?
Reply
Sep 16, 2016 | 11:26 AM
  #19  
Sorry about your loss! I would be interested in the rear sway bar for sure. If the budget allows, flywheel and clutch. Thanks.
Reply
Sep 17, 2016 | 06:29 PM
  #20  
what quality is the shift ****?
Reply
Subscribe