The painful plight of a VQ35DE driver....
#1
The painful plight of a VQ35DE driver....
C'mon guys I know you are with me. We all share the same plight of not enough mods! Where is our promised 'it'll be shipped in two weeks' Y-pipe? Where is that JWT ECU? Where is anything other than an intake and pulleys (besides nitrous) to make us go faster????
I do get a good feelings when I do know that people like Ethan with his Y2K header/Y-pipe conversion and Stevew with his frankencar intake are working hard for us. What do we have to do to get some respect, or more importantly some mods? Sorry, just had to vent.
I do get a good feelings when I do know that people like Ethan with his Y2K header/Y-pipe conversion and Stevew with his frankencar intake are working hard for us. What do we have to do to get some respect, or more importantly some mods? Sorry, just had to vent.
#2
Unfortunately for us, but something to consider is, this is a new engine in an old, 2yr, platform. Given the fact that there are not many companies that support Nissan and the ones that do are making mods for all the previous year cars and taking their time with the Max.
Take Stillen for instance the Altima came out 1st. and they got some mods going for it quick because Nissan sent them one early. They got to poke and prod the new motor and get ready for the car that got them started, the Z. There hasn’t been a new Z for 6yrs. and they are going to concentrate on it now because it will generate higher profit margins. People that drive brand new Z’s make money and are going to demand things for the car. We have the Z to thank for all the mods from them to begin with.
Just think you get to enjoy the warranty a little longer. I know yours has already been wrecked and I feel for you. But maybe someone else has been more unfortunate than you and totaled theirs. I’m looking for a wrecked one to get the intake manifold, y-pipe and anything else I can think of out of it. I’ll send the manifold out to be extrude honed cut the precats out of the y-pipe. There also has to be something we can do with the ECU.
It is my hope that next years Max doesn’t make me sorry about the 02 I just bought in May and not buy the 99 I had when its lease was up. You never know they may want to make the Max into Nissans’ version of the Q45, unlikely but…
Take Stillen for instance the Altima came out 1st. and they got some mods going for it quick because Nissan sent them one early. They got to poke and prod the new motor and get ready for the car that got them started, the Z. There hasn’t been a new Z for 6yrs. and they are going to concentrate on it now because it will generate higher profit margins. People that drive brand new Z’s make money and are going to demand things for the car. We have the Z to thank for all the mods from them to begin with.
Just think you get to enjoy the warranty a little longer. I know yours has already been wrecked and I feel for you. But maybe someone else has been more unfortunate than you and totaled theirs. I’m looking for a wrecked one to get the intake manifold, y-pipe and anything else I can think of out of it. I’ll send the manifold out to be extrude honed cut the precats out of the y-pipe. There also has to be something we can do with the ECU.
It is my hope that next years Max doesn’t make me sorry about the 02 I just bought in May and not buy the 99 I had when its lease was up. You never know they may want to make the Max into Nissans’ version of the Q45, unlikely but…
#7
Re: The painful plight of a VQ35DE driver....
Originally posted by Maximus1000
C'mon guys I know you are with me. We all share the same plight of not enough mods! Where is our promised 'it'll be shipped in two weeks' Y-pipe? Where is that JWT ECU? Where is anything other than an intake and pulleys (besides nitrous) to make us go faster????
C'mon guys I know you are with me. We all share the same plight of not enough mods! Where is our promised 'it'll be shipped in two weeks' Y-pipe? Where is that JWT ECU? Where is anything other than an intake and pulleys (besides nitrous) to make us go faster????
I do get a good feelings when I do know that people like Ethan with his Y2K header/Y-pipe conversion and Stevew with his frankencar intake are working hard for us. What do we have to do to get some respect, or more importantly some mods? Sorry, just had to vent.
What is stopping you from removing your engine and having it worked on? You can order custom pistons from JE, Arias, Ross and get the stock cams reground at crower or ISKY. Or you can drop the car off at a shop and pay $6k for a full turbocharger install with a stand alone engine management.
#8
Someone should get the KWT cams and do a write up on them and do a before and after dyno . I want do cams but it's a bit much for me to try before I see some solid info on them.
Look for a whole pulley setup soon and parts for the whole 3.5 L motor. Companys will have a ton of stuff available for this engine because it is in some many cars. The 350Z and G35 ecu's are probably 99% the same, so when stillen or JWT developes a ecu for these cars they will become available for us too. This time next year I should have a good 260 FWHP NA
Look for a whole pulley setup soon and parts for the whole 3.5 L motor. Companys will have a ton of stuff available for this engine because it is in some many cars. The 350Z and G35 ecu's are probably 99% the same, so when stillen or JWT developes a ecu for these cars they will become available for us too. This time next year I should have a good 260 FWHP NA
#10
Originally posted by MONTE 01&97 SE
Not all Z people make alot of money(decent living), I had a 95 300Zx before my 97 Maxima and I dont miss it at all.
Not all Z people make alot of money(decent living), I had a 95 300Zx before my 97 Maxima and I dont miss it at all.
28K vs 10K.
#12
Originally posted by jkratzer
Stillen has a y-pipe for the 2002 Altima but not the Maxima. The little brother Altima is overtaking the 2K2 Maxima in performance parts. who would have thunk.
Stillen has a y-pipe for the 2002 Altima but not the Maxima. The little brother Altima is overtaking the 2K2 Maxima in performance parts. who would have thunk.
MY Maxima.
#13
Originally posted by SR20DEN
Yeah but so what? The fastest VQ35DE isn't in an Altima. It's under the hood of a Maxima.
MY Maxima.
Yeah but so what? The fastest VQ35DE isn't in an Altima. It's under the hood of a Maxima.
MY Maxima.
#17
Originally posted by SR20DEN
Show me ANY 350Z (other than the GT3 Race car 3572cc's) or any G35 or any Altima that has run faster than me or put more hp on the ground.
Show me ANY 350Z (other than the GT3 Race car 3572cc's) or any G35 or any Altima that has run faster than me or put more hp on the ground.
The Max also has FWD to deal with while the other two are RWD which gives them an advantage over the Maxima. If you are modded, that is different, but you never said that you were modded.
I can't read your mind (which is a good thing ). How much are you puttin' down to the ground?
#18
Originally posted by jkratzer
You stated that the fastest 3.5 VQ is under the Maxima. I simply stated that you are wrong because a stock Maxima is not as powerful as a stock 350Z ( 280 hp) or a stock G35 (260 hp).
The Max also has FWD to deal with while the other two are RWD which gives them an advantage over the Maxima. If you are modded, that is different, but you never said that you were modded.
I can't read your mind (which is a good thing ). How you puttin' down to the ground?
You stated that the fastest 3.5 VQ is under the Maxima. I simply stated that you are wrong because a stock Maxima is not as powerful as a stock 350Z ( 280 hp) or a stock G35 (260 hp).
The Max also has FWD to deal with while the other two are RWD which gives them an advantage over the Maxima. If you are modded, that is different, but you never said that you were modded.
I can't read your mind (which is a good thing ). How you puttin' down to the ground?
#19
Holy crap!
Someone's peeved for not being recognized My 305 chevette is still faster than your car.
Hey Ed/Maximus1000 : did you send Kevin his money yet? I heard he hasn't gotten it yet. Oh yeah and did you recover your stolen wheels?
Someone's peeved for not being recognized My 305 chevette is still faster than your car.
Hey Ed/Maximus1000 : did you send Kevin his money yet? I heard he hasn't gotten it yet. Oh yeah and did you recover your stolen wheels?
Originally posted by SR20DEN
And I said 'MY' Maxima which would imply that it is modded. You didn't have to read my mind. Everything is in the apprpriate section. Dyno and Timesheets.
And I said 'MY' Maxima which would imply that it is modded. You didn't have to read my mind. Everything is in the apprpriate section. Dyno and Timesheets.
#20
Re: aww, poor baby lol
Originally posted by JSpecMax
try owning an I30!! The only thing they make for my car is rims, tints, and 94 octane!!
try owning an I30!! The only thing they make for my car is rims, tints, and 94 octane!!
Thread
Thread Starter
Forum
Replies
Last Post
6spd4dsc
5th Generation Classifieds (2000-2003)
4
03-04-2016 05:19 PM