Swapped Gauge Cluster Now ABS Light Is Lit??
#1
Thread Starter
Supporting Maxima.org Member
iTrader: (34)
Joined: Sep 2001
Posts: 5,008
From: NY, NY
Swapped Gauge Cluster Now ABS Light Is Lit??
I have a 01 GLE.. I just bought a gauge cluster off what appeared to be a SE 00-01.. I wanted the titantium face with blue backlit.. So I did the swap today, I was gonna swap the circuit board so I can retain my miles but then that's when I figured that the one I got was off a 00. So I said what the heck, I popped the 00 gauge cluster in, popped in all the cables. When I turned the key to the on position I noticed my miles went from 32K to 16K.. (I know, that's illegal)... Everything came one and worked fine.. The things I notice now is, my ABS light remains lit.. And the light for my TCS won't toggle on and off anymore. Does that mean they still work but will not display because the 00 model didn't have these features?? Someone please help!!! Is there anything I can do to fix this...
#2
well first off a nissan dealership will tell you where to go to have the miles on the cluster changed to what your car really has, granted you put your stock cluster back on. Did you switch one of wires or something when you plugged it in?
#3
Thread Starter
Supporting Maxima.org Member
iTrader: (34)
Joined: Sep 2001
Posts: 5,008
From: NY, NY
Originally posted by PHATMAN5050
well first off a nissan dealership will tell you where to go to have the miles on the cluster changed to what your car really has, granted you put your stock cluster back on. Did you switch one of wires or something when you plugged it in?
well first off a nissan dealership will tell you where to go to have the miles on the cluster changed to what your car really has, granted you put your stock cluster back on. Did you switch one of wires or something when you plugged it in?
#5
Thread Starter
Supporting Maxima.org Member
iTrader: (34)
Joined: Sep 2001
Posts: 5,008
From: NY, NY
Originally posted by Dario
try removing the bulb from the ABS light and put it where the TCS light would go. also did u swap the ciruit boards??? i did my 00 GXE to a SE 01 and it works.
try removing the bulb from the ABS light and put it where the TCS light would go. also did u swap the ciruit boards??? i did my 00 GXE to a SE 01 and it works.
#7
Mine is doing the exact same as the first post. Swapped my gauges, 01 SE Anniversary Ed (titanium) w/o TCS into an 01 GXE w/o TCS and my speedo & ABS light is staying on. I wonder if I have to swap around some pins or something. I thought it would be plug & play. I guess maybe it may not be TCS... not confirmed just throwing that out there.
What does this mean?? Grabbed it from the service manual
- from combination meter terminal 15 for the speedometer
- to terminal 19 of ABS actuator and electric unit (without TCS).
What does this mean?? Grabbed it from the service manual
SPEEDOMETER
The combination meter provides a voltage signal to the vehicle speed sensor for the speedometer.
The voltage is supplied
The combination meter provides a voltage signal to the vehicle speed sensor for the speedometer.
The voltage is supplied
- from combination meter terminal 15 for the speedometer
- to terminal 1 of the vehicle speed sensor (with TCS).
- to terminal 19 of ABS actuator and electric unit (without TCS).
The speedometer converts the voltage into the vehicle speed displayed
I mean is there anything I can modify to get this working? Solder, cut a lead etc??
Last edited by Memphis2k1; 12-13-2007 at 10:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 01:46 PM
Slamrod
4th Generation Maxima (1995-1999)
5
04-10-2016 06:24 PM
King_Ten_Ahead
5th Generation Maxima (2000-2003)
14
09-30-2015 05:27 PM