Does anyone have picture of Stillen Sway Bar?

Subscribe
Apr 8, 2003 | 10:32 PM
  #1  
I was wondering if anybody have a picture of a Stillen Rear Sway Bar installed on a 2k2 or a 2k3 Maxima.
(I would Search, but I can't)

Mostly I need pictures of where the Blue Brackets needs to be positioned and which wholes to use on the bar.

For some reason when I try to install mine I couldn't get the blue bracket to be positioned forward enough in order for the bar to be sitting right underneath the Rear Axle.

Thanks for any input.

P.S. 2k2 or 2k3 pictures only
Reply
Apr 8, 2003 | 10:34 PM
  #2  


Courtesy Mykmar10
Reply
Apr 8, 2003 | 10:39 PM
  #3  
Re: Does anyone have picture of Stillen Sway Bar?
Quote:
Originally posted by nismotech
I was wondering if anybody have a picture of a Stillen Rear Sway Bar installed on a 2k2 or a 2k3 Maxima.
(I would Search, but I can't)

Mostly I need pictures of where the Blue Brackets needs to be positioned and which wholes to use on the bar.

For some reason when I try to install mine I couldn't get the blue bracket to be positioned forward enough in order for the bar to be sitting right underneath the Rear Axle.

Thanks for any input.

P.S. 2k2 or 2k3 pictures only
try these sites:

http://www.greghome.com
http://www.paulwendy.com/maxima/rsb.htm
Reply
Apr 8, 2003 | 10:39 PM
  #4  
Quote:
Originally posted by Y2KSESteve


Courtesy Mykmar10
Thanks, but Do you have picture of where the blue Brackets are positioned?

Also, which holes to use?
Reply
Apr 8, 2003 | 10:45 PM
  #5  
I used the 3rd and 5th holes. I'm pretty sure thats what Stillen recommends. It fits the best that way as well, but you could probably use 2nd and 4th.
Reply
Apr 8, 2003 | 11:43 PM
  #6  
the brackets brace up against two nuts that stick out on the horizontal frames on both sides of the car. Then line up the bar on the 3rd and 5th holes without tightening things first and then just adjust till your happy.

if i have time, i'll take my wheel off and take pics
Reply
Apr 9, 2003 | 08:13 AM
  #7  
Quote:
Originally posted by Larrio
the brackets brace up against two nuts that stick out on the horizontal frames on both sides of the car. Then line up the bar on the 3rd and 5th holes without tightening things first and then just adjust till your happy.

if i have time, i'll take my wheel off and take pics
Thanks!, YOu don't gotta do that for me.. Thanks anyway, Acutally When I try to install I keep run into this "Bump/nut" on the inner side of the trailing arm which my blue bracket wouldn't clear.

Just like to know if anyone experience similar problem while installing it.
Reply
Apr 9, 2003 | 10:27 AM
  #8  
Quote:
Originally posted by nismotech


Thanks!, YOu don't gotta do that for me.. Thanks anyway, Acutally When I try to install I keep run into this "Bump/nut" on the inner side of the trailing arm which my blue bracket wouldn't clear.

Just like to know if anyone experience similar problem while installing it.
if you look carefully, the blue brackets should have a half circular cut out that will brace up against that inner bump your talking about.
Reply
Apr 9, 2003 | 03:20 PM
  #9  
Quote:
Originally posted by nismotech


Thanks!, YOu don't gotta do that for me.. Thanks anyway, Acutally When I try to install I keep run into this "Bump/nut" on the inner side of the trailing arm which my blue bracket wouldn't clear.

Just like to know if anyone experience similar problem while installing it.
No thanks for moi? I'd inserted two links w/rsb installation instruction & pics!
Reply
Apr 9, 2003 | 03:43 PM
  #10  
Quote:
Originally posted by nismotech


Thanks!, YOu don't gotta do that for me.. Thanks anyway, Acutally When I try to install I keep run into this "Bump/nut" on the inner side of the trailing arm which my blue bracket wouldn't clear.

Just like to know if anyone experience similar problem while installing it.
nismo tech.. here are the pics (i didn't take off the rim)

this is from the left side of the car. As you can tell, the brackets are between the two 10mm bolts.

left bracket:


right bracket:
Reply
Apr 9, 2003 | 04:34 PM
  #11  
Quote:
Originally posted by VMaximus02


No thanks for moi? I'd inserted two links w/rsb installation instruction & pics!
Sorry, I Want to Thanks You too! Didn't know we have some really sensitive people in here..I want to THANK EVERYBODY THAT GIVE ME ANY INPUT ON THIS MATTER!

I love you all, if I miss anybody please don't hate me. I'll send you a Private PM Thanks Note.
Reply
Apr 9, 2003 | 05:43 PM
  #12  
Quote:
Originally posted by nismotech


Sorry, I Want to Thanks You too! Didn't know we have some really sensitive people in here..I want to THANK EVERYBODY THAT GIVE ME ANY INPUT ON THIS MATTER!

I love you all, if I miss anybody please don't hate me. I'll send you a Private PM Thanks Note.
Just playing w/you dude!
Reply
Apr 9, 2003 | 09:57 PM
  #13  
Quote:
Originally posted by VMaximus02


Just playing w/you dude!
Reply
Subscribe