got new strut bar tell me what u think
#1
got new strut bar tell me what u think
http://www.f150online.com/galleries/...w.cfm?num=3777
i paid like 62 dollars for it
i paid like 62 dollars for it
#2
Re: got new strut bar tell me what u think
Seroiusly...u need some modification on that strut bar.
use a multi-purpose remover to remove that ugly "Otto Racing" and replace with a small stillen sticker then holla...u have a stillen strut bar
use a multi-purpose remover to remove that ugly "Otto Racing" and replace with a small stillen sticker then holla...u have a stillen strut bar
#7
Re: got new strut bar tell me what u think
I was thinking about getting the same FSTB. Did you know any difference after you have installed the FSTB? Do you think it made the body more stiff giving it a solid ride? Is it worth the money?
#9
Looks good. Uncanny how much it resembles Stillen's FSTB isn't it? Hehe. Are there any fitment issues? It clears the hood well? Doesn't pinch the washer fluid lines or anything? I've read before that some FSTB's can do this.
#10
the bar is well worth my money but you should buy it on ebay. if its not there the guy will up one up for auction trust me. theis bar is just like the still i think its the exact bar. also it fit perfect. it was as easy as 1 2 3. trust me it was well worth the money. just buy it off ebay
#12
It is SOLID, just like the Stillen. I also have one, bought it off of E-bay for $58.00 including s/h back in October '02. Great bar and I do feel somewhat of a difference with it installed. The front end feels tighter and turn-in is crisper at higher speeds.
#15
Re: got new strut bar tell me what u think
Originally posted by krmaxima
http://www.f150online.com/galleries/...w.cfm?num=3777
i paid like 62 dollars for it
http://www.f150online.com/galleries/...w.cfm?num=3777
i paid like 62 dollars for it
are the ends rounded (i.e., complete circles) like the cheapo EBay bars, or are they tapered like a Stillen bar?
#16
Re: got new strut bar tell me what u think
Originally posted by krmaxima
http://www.f150online.com/galleries/...w.cfm?num=3777
i paid like 62 dollars for it
http://www.f150online.com/galleries/...w.cfm?num=3777
i paid like 62 dollars for it
What tools/wrenches were required to perform this task (I am not very handy with tools).
Any instructions that I could give to a mechanic?
Thanks
Vic
#17
Re: Re: got new strut bar tell me what u think
Originally posted by CVicVogel
Is yours an auto or 6 speed? I heard they sit at different heights.
What tools/wrenches were required to perform this task (I am not very handy with tools).
Any instructions that I could give to a mechanic?
Thanks
Vic
Is yours an auto or 6 speed? I heard they sit at different heights.
What tools/wrenches were required to perform this task (I am not very handy with tools).
Any instructions that I could give to a mechanic?
Thanks
Vic
1) Remove 3 bolts from each strut tower. (2)
2) Install strut bar. Verify clearance on manifold and hood before securing.
3) Replace 3 bolts from each strut tower (2) to 36 ft/lbs.
4) Drink beer.
It will take you no more than 40 minutes if you are VERY slow and methodical. If you race through it...more like 10 minutes. Good beginner mod to get your hands dirty.
#18
Originally posted by lcf
Looks good. Uncanny how much it resembles Stillen's FSTB isn't it? Hehe. Are there any fitment issues? It clears the hood well? Doesn't pinch the washer fluid lines or anything? I've read before that some FSTB's can do this.
Looks good. Uncanny how much it resembles Stillen's FSTB isn't it? Hehe. Are there any fitment issues? It clears the hood well? Doesn't pinch the washer fluid lines or anything? I've read before that some FSTB's can do this.
Would be nice to have some good feedback on this.
#19
Re: Re: Re: got new strut bar tell me what u think
Originally posted by Colonel
Very simple.
1) Remove 3 bolts from each strut tower. (2)
2) Install strut bar. Verify clearance on manifold and hood before securing.
3) Replace 3 bolts from each strut tower (2) to 36 ft/lbs.
4) Drink beer.
It will take you no more than 40 minutes if you are VERY slow and methodical. If you race through it...more like 10 minutes. Good beginner mod to get your hands dirty.
Very simple.
1) Remove 3 bolts from each strut tower. (2)
2) Install strut bar. Verify clearance on manifold and hood before securing.
3) Replace 3 bolts from each strut tower (2) to 36 ft/lbs.
4) Drink beer.
It will take you no more than 40 minutes if you are VERY slow and methodical. If you race through it...more like 10 minutes. Good beginner mod to get your hands dirty.
#20
Re: Re: Re: Re: got new strut bar tell me what u think
Originally posted by jjs
There may be some relocation of brackets, etc. that will be necessary. I know this is the case on my AE.
There may be some relocation of brackets, etc. that will be necessary. I know this is the case on my AE.
[threadjack]
You ever fix that windshield wiper issue?
[/threadjack]
Thread
Thread Starter
Forum
Replies
Last Post
MaxLvr21
5th Generation Maxima (2000-2003)
14
10-17-2015 12:11 PM
maxima-junky
4th Generation Classifieds (1995-1999)
1
10-07-2015 06:13 PM