2k2/3 Cleared Taillights
#1
2k2/3 Cleared Taillights
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
#2
Re: 2k2/3 Cleared Taillights
Originally posted by ICULookN
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
#4
Re: 2k2/3 Cleared Taillights
Originally posted by ICULookN
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
#9
#14
I know that in CA, you are required to have a red reflector on the rear of your car. Removing the red lens eliminates the reflector. I know the new Lexus RX330 has clear tail lamps, but it has it's reflectors on the rear bumper rather than integrated with the tail lamps.
Clear tail lamps = cop magnets
Clear tail lamps = cop magnets
#17
Thanks Playero for putting up the pics. This lens was a rough cut that was sent to me to test-fit, I sent the original lens to someone in CA to make an OEM fit lens. The lens here is not a perfect cut but close enough for right now. I've contacted about 10 plastic molding/injection companies over the past 2 months to make red/white lens but no luck. So I decided to get it a clear lens for now and maybe paint the top part red with Testors or Vans translucent paint or maybe paint the whole thing red. As far the law goes, I was thinking about painting the interior shell red and leave the lens white. The taillight is not difficult to open, I recommend that you use a handsaw instead of a dremel unless you can find a really thin drill bit. The regular drill bits remove to much plastic, if you look at your lights from the side, there is a gap, the plastic in that gap is about 3mm thick that surrounds the whole light. This is not like our headlights where we can put it in the oven to soften up the sealant, there is no sealant. The clear shell is pressure-fitted into the gray case. Just saw or dremel inside the gap all the way around and the clear shell will come off. To remove the lens there is 2 screws to unscrew on the back and the inner chrome shell will pop out then you can remove the lens. Give me some ideas on what to do from here. Thanks.
#20
Originally posted by playero
http://images.cardomain.com/member_i...33_23_full.jpg
http://images.cardomain.com/member_i...33_24_full.jpg
http://images.cardomain.com/member_i...33_23_full.jpg
http://images.cardomain.com/member_i...33_24_full.jpg
#21
Re: 2k2/3 Cleared Taillights
Originally posted by ICULookN
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
I've been working on this for about month now. The taillights are not hard to open but you have to be careful. Let me know what you think. Igor911, Playero, and Emax02 I e-mailed the pictures to you, can one of you post them here. Thanks.
Joe
#23
The lens was cracked, it was a damaged one that I bought for $25.00 from a junkyward here in Maryland. I have 2 more lights I bought from a member here for $100.00 + the 2 on my car. I went to Walmart this morning to find the red translucent paint but could not find any, I will make the top red when I can find the paint.
#24
Originally posted by NT2SHBBY
they're nice, no doubt...but like the other dude said..u'll get pulled over with a quickness without red bulbs....
If the top was red, with the turn signal clear, Imma cop me a set fo sheezy!!!!
they're nice, no doubt...but like the other dude said..u'll get pulled over with a quickness without red bulbs....
If the top was red, with the turn signal clear, Imma cop me a set fo sheezy!!!!
#28
they def look cool but IMO out of any maxima taillights..the all red gle and gxe from 00 and 01, the smoked out black SE's and the claer 02-03s............the smoked out black SE's take the cake in my book but thats just my opinion
#30
Originally posted by jessa
ive seen a few around that the yellow is red...are there any tutorials or anything on how to do that?
ive seen a few around that the yellow is red...are there any tutorials or anything on how to do that?
WHEELMAN
#34
Originally posted by releasedtruth
Mine are painted body color, I think that's the most ideal of all options, looks freaking incredible. And the bottoms are clear because they are 01 lights.
Mine are painted body color, I think that's the most ideal of all options, looks freaking incredible. And the bottoms are clear because they are 01 lights.
#35
I will not leave the lens all clear, I don't want to give the cops any reason to pull me over. I will try to make a couple of lenses in different colors: red/clear, all red and something similar to Maxima Zero's taillights. Hopefully I will have some pics next week.
#37
If you were careful in taking apart the lens, all you need is clear silicon sealant to reseal it. No one will ever know that it was opened unless they looked at it real close.
#38
Lights look awesome!!!
Originally posted by ICULookN
I will not leave the lens all clear, I don't want to give the cops any reason to pull me over. I will try to make a couple of lenses in different colors: red/clear, all red and something similar to Maxima Zero's taillights. Hopefully I will have some pics next week.
I will not leave the lens all clear, I don't want to give the cops any reason to pull me over. I will try to make a couple of lenses in different colors: red/clear, all red and something similar to Maxima Zero's taillights. Hopefully I will have some pics next week.
#39
Re: Lights look awesome!!!
Originally posted by MaXBoost03_SE
Is it possible to make a lens in black? That would look sweet on my Super black SE.
Is it possible to make a lens in black? That would look sweet on my Super black SE.
-R
#40
Re: Re: Lights look awesome!!!
Originally posted by 255HP_03_SE
Why not just trade your 03 SE tail lights for a pair of 00-01 SE tail lights (the black ones)? There are people out there who are always looking for the trade...
-R
Why not just trade your 03 SE tail lights for a pair of 00-01 SE tail lights (the black ones)? There are people out there who are always looking for the trade...
-R
Its not the same, What i mean is Instead of the red lens inside, To have it in black. (i know it sounds crazy) but would be nice for shows.