spring pop, n pull
spring pop, n pull
i recently had a set of maxspeeds put in inplace of my stockers, still on stock struts. when i first drive the car the front end makes a low rubbing sound and sometimes a pop and then my alignment is thrown off so bad i can barely drive the thing, depending on the turns u take, sometimes itll pop back into alignment and sometimes not, usually not, mainly pulls to the right. i had an alignment done but it didnt do anything. any ideas?
Guest
Posts: n/a
were the upper strut mounts installed right? there is an arrow that faces outward, and if it not right, that could be the problem. Was it a good shop that did it? Maybe the spring isnt seated correctly (i had that prob on my sentra) and everytime i turned, the spring would "bounce"
There are only 5 bolts also, make sure they are all tight. 2 on the struts, and 3 up top in the engine bay. Oh, and the 1 on the strut as well.
There are only 5 bolts also, make sure they are all tight. 2 on the struts, and 3 up top in the engine bay. Oh, and the 1 on the strut as well.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
Jun 6, 2017 02:01 PM
Unclejunebug
5th Generation Maxima (2000-2003)
10
Apr 2, 2016 05:42 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
Sep 29, 2015 02:02 PM
followthadollar
4th Generation Maxima (1995-1999)
3
Sep 27, 2015 01:06 PM



