5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Stillen Sway bar VS Cattman Sway Bar

Thread Tools
 
Search this Thread
 
Old 01-04-2004, 10:06 AM
  #1  
Member
Thread Starter
 
GMoney's Avatar
 
Join Date: Jun 2003
Posts: 33
Stillen Sway bar VS Cattman Sway Bar

hello everyone...

Before anyone calls me a I know I am supposed to use the search feature but it has been disabled for me.

Anyways, I was just wondering what are the main differences between these 2 sway bars. I know one is installed differently than the other...any benefit from the different installation styles?

What has been your experience so far with either of them? Any thing good to tell or most importantly anything bad?

Thanks
GMoney is offline  
Old 01-04-2004, 02:16 PM
  #2  
Oh hi....
 
SeaFoam2DMax's Avatar
 
Join Date: Jul 2003
Posts: 751
My bar from cattman looke great as it sits on my bedroom floor. Cattman seem to be a better value, i didn't even bother with stillen.
SeaFoam2DMax is offline  
Old 01-04-2004, 02:19 PM
  #3  
Senior Member
 
Matto357's Avatar
 
Join Date: Oct 2003
Posts: 207
Originally Posted by GMoney
hello everyone...

Before anyone calls me a I know I am supposed to use the search feature but it has been disabled for me.

Anyways, I was just wondering what are the main differences between these 2 sway bars. I know one is installed differently than the other...any benefit from the different installation styles?

What has been your experience so far with either of them? Any thing good to tell or most importantly anything bad?

Thanks
I've had the Progress (cattman) swaybar on for a few days now, it kicks major a$$.
Matto357 is offline  
Old 01-04-2004, 02:33 PM
  #4  
Oh hi....
 
SeaFoam2DMax's Avatar
 
Join Date: Jul 2003
Posts: 751
yeah i really need to install mine
SeaFoam2DMax is offline  
Old 01-04-2004, 02:35 PM
  #5  
Senior Member
 
Zero Deuce SE's Avatar
 
Join Date: Jul 2002
Posts: 2,836
Originally Posted by kcgc187
yeah i really need to install mine
Being the nice guy that I am, I'll install it on my car for you.
Zero Deuce SE is offline  
Old 01-04-2004, 02:42 PM
  #6  
Future Camaro SS owner
iTrader: (13)
 
MyownNismo's Avatar
 
Join Date: Dec 2001
Location: MN
Posts: 3,204
Originally Posted by GMoney
hello everyone...

Before anyone calls me a I know I am supposed to use the search feature but it has been disabled for me.

Anyways, I was just wondering what are the main differences between these 2 sway bars. I know one is installed differently than the other...any benefit from the different installation styles?

What has been your experience so far with either of them? Any thing good to tell or most importantly anything bad?

Thanks
Stillen's is more cause it's adjustable, but are you going to go under your car and adjust yuor sway-bar. Go with the cattman and save some $$$.
MyownNismo is offline  
Old 01-04-2004, 02:48 PM
  #7  
Oh hi....
 
SeaFoam2DMax's Avatar
 
Join Date: Jul 2003
Posts: 751
Originally Posted by charliekilo3
Being the nice guy that I am, I'll install it on my car for you.
noooooooooooooooooo, i will eventually get off my lazy *** and do it, i just don't have ramps or jackstands at the moment.
SeaFoam2DMax is offline  
Old 01-04-2004, 02:51 PM
  #8  
Senior Member
 
Zero Deuce SE's Avatar
 
Join Date: Jul 2002
Posts: 2,836
Originally Posted by kcgc187
noooooooooooooooooo, i will eventually get off my lazy *** and do it, i just don't have ramps or jackstands at the moment.
No worries man, I have ramps and jackstands. I got it covered.
Zero Deuce SE is offline  
Old 01-04-2004, 02:52 PM
  #9  
I miss the .org!
iTrader: (29)
 
Triple8Sol's Avatar
 
Join Date: May 2002
Location: Seattle, WA
Posts: 6,928
I used to have the Addco and now the Cattman/Progress RSB. Both are very similar, just different hardware. They're the shiznit...the Stillen one is overpriced.
Triple8Sol is offline  
Old 01-04-2004, 02:53 PM
  #10  
Senior Member
 
Matto357's Avatar
 
Join Date: Oct 2003
Posts: 207
Originally Posted by kcgc187
noooooooooooooooooo, i will eventually get off my lazy *** and do it, i just don't have ramps or jackstands at the moment.
I did mine without ramps or jackstands. Though, after I had all the bolts on I jacked up each wheel seperately and took it off to make sure my bolts on the sides were really tight. But it is doable without stands.
Matto357 is offline  
Old 01-04-2004, 03:18 PM
  #11  
Oh hi....
 
SeaFoam2DMax's Avatar
 
Join Date: Jul 2003
Posts: 751
hmm, i need to get a better jack, one that can get under my car, i'll figure it out, i should have waited for my sway bar to arrive before i put my JICs on. I had access to a shop for that, but i don't want to pay to get the sway bar on
SeaFoam2DMax is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
Fbana41
Maximas for Sale / Wanted
3
08-29-2016 12:18 PM
05RLS2
7th Generation Maxima (2009-2015)
4
04-14-2016 11:49 AM
Nv2dmaxmd
4th Generation Classifieds (1995-1999)
6
10-19-2015 05:37 PM
Stagnet04
4th Generation Classifieds (1995-1999)
1
09-14-2015 11:28 PM



Quick Reply: Stillen Sway bar VS Cattman Sway Bar



All times are GMT -7. The time now is 09:04 PM.