KLOOGY

iTrader: (12)

PLEASE DO ! I promise to be your Org buddy for as long as you own the Max....and you will thank me , for as long as you are with us on the ORG !....just ask Chinaonnitrous !....

PearlWhtMaX2000

iTrader: (5)

why whos Chinaonnitrous .

PearlWhtMaX2000

iTrader: (5)

big H- i love these rims. how much for the 19's? w/tires? (the gunmetal)

myktek

doesn't it look like teddibear's kit...it looks like the r33 front but w/ more of a flare and the back is similar too....hehehe

Woo Cho

iTrader: (3)

The front looks awsome but I don't have factory grill..........

MyownNismo

iTrader: (13)

How's the Greddy going to fit out the back. I am digging the front as long as I can get my sidemarkers put on it. I am wondering about the main grill. Hey Big h ask them if they know there's a difference in bumpers from 00-01 through 02-03. If all else fails I can get the JMS grill.

PearlWhtMaX2000

iTrader: (5)

i dint get it, so does the front come with our factory grill? or does our bumper get cut off??

GreekMaxima

dont like it! the best kit for our maximas is on my sig

MyownNismo

iTrader: (13)

well looks like sarona is making that kit. But I have decided on my kit it's the stillen kit w/ Fascia like Woo Cho's. I like it just for the fact it gets rid of the oval grill.

GreekMaxima

the best kit now out there is from stillen... but i dont like enough the stillen sides...

PearlWhtMaX2000

iTrader: (5)

i think the sarona sides are the best

soundmike

iTrader: (24)

soundmike

iTrader: (24)

Anyway, the front does look nice. My only gripe about it is how the corners towards each light seem to curve upwards. It's like looking at the Max smiling at you or something.

jesse

iTrader: (5)

im not feelin the rear bumper at all, whats the point in making it a whole bumper, they should have just made it on the bottom like the stillen rear. the front is nice...you guys think it will even come with the yellow lights? i like the side skirts though

MaximaPolak

iTrader: (9)

The OCTANE KIT??

MannyNJ2k2max

iTrader: (3)

Its ok.....It could fit a nice Ram air/CAI design tubing though...

ChillWill2000

Is it just the picture or does the bottom corners of the front bumper angle out and stick out like that?

KLOOGY

iTrader: (12)

They stick out a bit. I think it looks sweet. I can see some nice CF splitters going on that lower section.

20maxima01

I think this looks a lot like the Skyline kit. Does anyone have the photoshop pictures of the white skyline styled body kit on the maxima that was posted a long time ago? It would be nice to compare. Also any word on getting a group price? Oh, and i noticed someone wrote two weeks for the poly-urethane, but when I talked to them they said two months.

PearlWhtMaX2000

iTrader: (5)

we should def get a group deal going. if no one has started one yet i will cal and get info. but only on the urethane right?

ChromeSE5

iTrader: (3)

I'm impressed that there is a different kit out there already for our maximas. Do you think that I might have to get a 2k2 or 2k3 grill so the kit would fit like the one on the pix? And besides that, the grill is connected to my bumper on my 2k right?

PearlWhtMaX2000

iTrader: (5)

yes it is connected to the bumper that what i was wonderring would we need to cut our greill out?? and no you would not need to get a 2k2 grill

PearlWhtMaX2000

iTrader: (5)

http://forums.maxima.org/showthread.php?t=278450

big h

iTrader: (1)

I actually have been talking with them regarding setting up a groupdeal, I'm just waiting for the pricelists.

PearlWhtMaX2000

iTrader: (5)

oh ok great. wait what site where u talking w?

big h

iTrader: (1)

Since the emergence of two sites that offer the same kit, I have been confused on who makes this kit. So, I called Vision Autodynamics today to see who is the manufacturer of this kit, and they confirmed it was JT as the manufacturer. So I went back to JT and after I sent all my info in, I received an email with the price of the full fiberglass kit. I will call to see why I haven't received the price for the urethane kit tomorrow.
The GB I plan to set up is for the urethane bumper only. So I'll hopefully find the price out tomorrow and post it as an official GB thread. :0

Harry

PearlWhtMaX2000

iTrader: (5)

ok sounds good. so the 2 sites are joint? but the original is JT. i think i get it now. yeah def set up the GD i think i am going to sell my Sarona front (which is still in a box in my basement) to get this one

MyownNismo

iTrader: (13)

Someone photoshop this and make the car lower.

Mkang513

iTrader: (1)

I like the front. And to think, i was just about to order a new oem bumper. Although, it would look better w/o the smile.

Triple8Sol

iTrader: (29)

But some CF canards on the side and some CF splitters on the bottom (sorta like WooCho has) and that front bumper would be complete.

skandalouz

iTrader: (2)

i was actually looking at those rims.....
pearlwht... check out the adr sterlings also.. they look almost identical...
can i get a price quote on 19x8s for this in gunmetal? with and without tires?

PearlWhtMaX2000

iTrader: (5)

oh wow your right they also look good.

big h

iTrader: (1)

Sorry but my price on those can not even come close to the guys selling them in the States. After doing the conversions and fees blah blah blah...it would be too expensive. I wish I could get the distributor on the American side to drop ship, but they won't, they tell me to go to the guys in Canada and order from them.

The only manufacturers that are working with me to get you the deals are HP Racing, ADR wheels, BC Forged, Velox, to name a few off the top of my head.

Those Sterlings are really nice, we have a set of 20's here at the shop that we are putting on one of our cars, 2002 M3.

PearlWhtMaX2000

iTrader: (5)

yeah i like the torque 5's the best.
P.S. any word about the octane kit??

skandalouz

iTrader: (2)

how much u sell the sterlings for?
19x8 or 20s? i foudn them on ebay for like 699.. for the 20s... they seem ridiculously low

big h

iTrader: (1)

Yup, just got off the phone with Steve from JT. The estimated time for the release of the urethand front bumper is 2 weeks but no guarantee, it could take more time.

Ok shipping for the front bumper is going to be anywhere from $125 (west coast) to $150 (east coast). You guys got it easy...shipping to Canada $210 an up. I have not asked about direct pick-up for locals or if someone from the east wants to drive down and pick it up hehe.

The cost is in my hands, but the shipping price is going to raise the price back up. It's roughly working around $275 for the front bumper plus shipping. What do you guys think?

Harry

big h

iTrader: (1)

yah that s the power of ebay. in order to sell them at 699 I would need to buy in volume...big volume. Plus it does not help that i am in Canada too, because the customs and border fees bring the price up...way up. My sell in a set of 20" Sterlings is around $900US.

PearlWhtMaX2000

iTrader: (5)

big h u have pm

Sammzway

iTrader: (3)

Damn.. this is really nice.. but the important question still stands for us 2k-2k1 guys.. how in the world would we fit this kit ? How does the grill work , kit comes with a new grill?

Also, if anyone of you are selling your old body kit to buy this new one. Let me know.. i might be interested

PearlWhtMaX2000

iTrader: (5)

i might be selling my sarona front and or back... brand new still in box interested??