Installing clear side markers
Installing clear side markers
I need install instructions for side markers Help!
Great site for Maxfans have learned a great deal already andlook forward to
every visit for new and tested ideas.
Thanks
Demsta
Great site for Maxfans have learned a great deal already andlook forward to
every visit for new and tested ideas.
Thanks
Demsta
Installing side markers is easy -- the old ones pop right out - use a flathead screwdriver with a towel over it so that you don't damage your paint - just insert the screwdriver into one end of the sidemarker, apply moderate force and it will pop right out. You'll then remove the harness that holds the bulb (it twists off) and voila! Repeat in reverse to install new sidemarker. Good luck
you can find a dummy proof install guide here:
http://www.max-world.org/frames/howtodo.html
its the first link on the page.
http://www.max-world.org/frames/howtodo.html
its the first link on the page.
where did u guys buy ur sidemarkers? im lookin to get em cheap, cuz i dont have that much money to throw, but i know it's a mod i must do..
and the bulbs, too. if im not mistaken, u gotta buyt he bulbs separetely for either the back or the front, can't remember which one.
thanks
and the bulbs, too. if im not mistaken, u gotta buyt he bulbs separetely for either the back or the front, can't remember which one.
thanks
ebay! several sellers always have them up there. got mine there for about $40 shipped.
or custommaxima.com
you need to decided what color bulbs you want to run. you can use yellow, red, blue, white, etc. if you want to keep the stock look/light. use yellow in front and red in rear.
if i remember correctly, my stock front bulbs where yellow. so i reused them with the clears. the rears where white, so i had to buy red bulbs for them instead.
and you don't have to use regular bulbs. alot of guys run LEDs.
or custommaxima.com
you need to decided what color bulbs you want to run. you can use yellow, red, blue, white, etc. if you want to keep the stock look/light. use yellow in front and red in rear.
if i remember correctly, my stock front bulbs where yellow. so i reused them with the clears. the rears where white, so i had to buy red bulbs for them instead.
and you don't have to use regular bulbs. alot of guys run LEDs.
yeah, i saw a lot on ebay, i just wasn't sure what the going rate was for them; plus, if htere was any place that included the lights with the rears, i guess not...
custommaxima's prices are way too high.
thanks tho, will be lookin to do this mod very soon
custommaxima's prices are way too high.
thanks tho, will be lookin to do this mod very soon
Thanks for the great info guys and Russ really nice how to pics and instructions. I got my sidemarkers from Courtesy Nissan in Texas and many other AE parts as well as in cabin filters prices were great and service was same. Thanks again
man i dont know if other people had problems with this, the right passenger side bumper light was an a$$ to pluck out. I ended up pushing some paint and messing up my corner side. Its hardly noticable, but I was ****ed. I found out that the clip that was on the Stock Side marker was not letting go, so I DUMMY forced it out.
*word of advice.... NEVER FORCE ANYTHING OUT IF YOU DONT KNOW WHAT YOU ARE DOING....=)*
*word of advice.... NEVER FORCE ANYTHING OUT IF YOU DONT KNOW WHAT YOU ARE DOING....=)*
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
May 21, 2016 12:46 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM
yat70458
5th Generation Maxima (2000-2003)
2
Aug 3, 2015 01:16 PM




