Spring comparison gallery finally complete!! (okay, almost...)
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Feb 2003
Location: Kansas City
Posts: 1,489
Spring comparison gallery finally complete!! (okay, almost...)
Well, after plenty of hunting and prodding, the springs comparison gallery is finally complete!
Give it a look here: http://www.innerbean.com/housecor/sp..._decision.html
Well, except for a couple minor details. Can you guys help with these?
1. Need measurements from ground to center of fender for H&R and Maxspeed
2. Need a better quality sideshot of Eibach drop
If anyone could help with the above, that'd be great. And big thanks to those who emailed me their shots!
Give it a look here: http://www.innerbean.com/housecor/sp..._decision.html
Well, except for a couple minor details. Can you guys help with these?
1. Need measurements from ground to center of fender for H&R and Maxspeed
2. Need a better quality sideshot of Eibach drop
If anyone could help with the above, that'd be great. And big thanks to those who emailed me their shots!
#5
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Feb 2003
Location: Kansas City
Posts: 1,489
Originally Posted by Y2k Max Luv
No love to us 5.0 gen owners.
J/K... Nice site
J/K... Nice site
#12
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Feb 2003
Location: Kansas City
Posts: 1,489
Originally Posted by LithiuMax
Dude.. you still included me in there, despite my complete retardedness on getting you a pic. Much props on that and the site as a whole!
Thanks for the props guys.
#14
Originally Posted by housecor
Well, after plenty of hunting and prodding, the springs comparison gallery is finally complete!
Give it a look here: http://www.innerbean.com/housecor/sp..._decision.html
Well, except for a couple minor details. Can you guys help with these?
1. Need measurements from ground to center of fender for H&R and Maxspeed
2. Need a better quality sideshot of Eibach drop
If anyone could help with the above, that'd be great. And big thanks to those who emailed me their shots!
Give it a look here: http://www.innerbean.com/housecor/sp..._decision.html
Well, except for a couple minor details. Can you guys help with these?
1. Need measurements from ground to center of fender for H&R and Maxspeed
2. Need a better quality sideshot of Eibach drop
If anyone could help with the above, that'd be great. And big thanks to those who emailed me their shots!
Also, I assume the measurements are from the ground to the fender along the middle of the wheel?
Rob.
#15
Originally Posted by MixSER6
Hey man, I have a white 2003 SE running on Eibach's and stock shocks. If you want, I can take a pic (with measurements) when I get home today. BTW, I have Illumina's on the way, so if you would like me to get a pic of that as well (with measurements, I can do that too).
Also, I assume the measurements are from the ground to the fender along the middle of the wheel?
Rob.
Also, I assume the measurements are from the ground to the fender along the middle of the wheel?
Rob.
Illuminas will not change your ride height at all, just the dampning effect of the suspension...
#17
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Feb 2003
Location: Kansas City
Posts: 1,489
Originally Posted by MixSER6
Hey man, I have a white 2003 SE running on Eibach's and stock shocks. If you want, I can take a pic (with measurements) when I get home today. BTW, I have Illumina's on the way, so if you would like me to get a pic of that as well (with measurements, I can do that too).
Also, I assume the measurements are from the ground to the fender along the middle of the wheel?
Rob.
Also, I assume the measurements are from the ground to the fender along the middle of the wheel?
Rob.
#19
Originally Posted by housecor
MixSER6 - Sounds great. Quicksilver's right - the Illuminas won't change the ride height so the shot from today should be great. And yes, the measurement is from the ground to the center of the bottom of the fender. Thanks!
I didn't think the Illumina's would change the ride height at all, but I figured I'd offer just incase. I'll probably still do a measure after I install them, just to see if they do (but like you said, they probably won't).
#21
I put Eibachs on my 2000 I30 a little over a week ago if you want Pix of that. I dont know how much of a difference my fenders would make, but I dont think the weight is much different than a fully loaded max.
Lemmy know if you want a pic or two
Lemmy know if you want a pic or two
#22
That is one of the best websites I've ever seen, period. If you don't design websites for a living, you should. I'll be looking at your site a lot when I start adding more mods to the max. I now know what kind of springs I want, thanks.
#23
i measured the hight of my maxspeeds the other day and the front was 26 3/4 and the rear was 26 5/8 but there is some stuff in my trunk by the way the site looks awesome and i finally saw what my car is gonna look like with the tein s-techs so i'll be getting rid of the maxspeeds
#24
Ummm....I'm not going to be able to get those pics and measurements for ya today........it's raining like hell here in Northern VA. Thunderstorms o'plenty.
Damn, my car was nice and clean too.
Damn, my car was nice and clean too.
#25
THanks for another VERY helpful addition to your site. I've already used it for fog re-wire, will probly be using it to help decide what drop to do later this summer thanks to the new comparisons. Awsome job man!
#26
If Maxspeeds & H&Rs drop the rear supposedly a 1/4 of an inch according to the measurements from stock. would it be realavant to just lower the front and maybe throw in a couple subs in the trunk to lower the rear that quarter inch the springs would do? as apposed to lowering the rear and then, putting in subs which lowers the rear even more giving a more uneven appearance?
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
imported_Nismo_max
1st-3rd Generations Classifieds (1981-1994)
4
02-17-2016 03:39 AM
KabirUTA13
5th Generation Classifieds (2000-2003)
19
10-17-2015 02:15 AM