ok whats that suspension which you can adjust the hight on again , coilovers right ? ok well who makes them and which ones are really great im lookign for a smooth ride plus how do you adjust the ride can i jsut turn the wheel and turn the **** or do i have to jack up the car everytime ? and links ?

 

I heard you have to remove the wheel.

JIC, Tein, D2 Racing make them.

 

Not if you can see right through the wheel

 

by jacking up the car, you can get behind the wheel and turn the ring. i've done this numerous times.

 

Dropzone N1 suspension is fully ride height adjustable as well

 

on the jics there are 3 seat rings... loosen the one on the bottom and there are 2 on the top spin the bottom one to the right to raise car spin the top one left to drop it....easy as pie

btw marco you should goto the meet coming up next weekend in mass there are 2 or 3 people coming from ny so far.

 

Dont get the misconception that adjustment is easy. If you want to do it right you have to take the wheel off and unbolt the bottom part of the coilover from the car and screw the mount up and down the shaft untli your desired height is reached. By doing this you mantain full suspension travel rather than lowering from the spring. I am not bashing any of the other comments, just speaking on personal experience from mine

 

What do you think of the ride quality so far. We haven't had any descent input about the D2 coilovers. How does it compare to aftermarket springs and struts.

 

Sorry but I don't have the D2's I have the toser coilovers (which is basically the same design)

 

what is the maximum inches they lower the car??

 

Are the Toser Coilovers rebuildable? and how much?