5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Did i blow an 02 sensor?????

Thread Tools
 
Search this Thread
 
Old 11-20-2004, 10:31 PM
  #1  
Senior Member
Thread Starter
iTrader: (5)
 
PearlWhtMaX2000's Avatar
 
Join Date: Oct 2003
Location: Boston!!!
Posts: 3,726
Did i blow an 02 sensor?????

ok i was driving today, and all of a sudden my car felt and sounded kinda odd, than the TCS, Slip, and CEL lights went on and it smelled like exhaust or something burning in the car, so i pulled over and shut it off, i waited a bit turned it back on, and everything was fine but the CEL was still on. I know its not my MAF cus its driving fine now. so im guessing 02 sensor, am i right? an how much would it cost to get this fixed? Should i go to the dealer to get this done?

Thanx
PearlWhtMaX2000 is offline  
Old 11-20-2004, 11:01 PM
  #2  
Z
iTrader: (8)
 
NYPD-Arnold's Avatar
 
Join Date: Apr 2004
Posts: 5,818
Doubt it's an O2 sensor. Could be a problem with a cat. I have two dead O2 sensors and I don't get any smells.
NYPD-Arnold is offline  
Old 11-20-2004, 11:59 PM
  #3  
Senior Member
iTrader: (5)
 
nadeemp8's Avatar
 
Join Date: Mar 2004
Location: Houston, TX.
Posts: 807
Yeah, O2 sensors don't smell or make any noticeable change in performance. Also with my O2 sensors going out only th CEL light came on. Take your car to Autozone and have them check out your computer.
nadeemp8 is offline  
Old 11-21-2004, 01:12 AM
  #4  
Senior Member
 
FanaticMadMax's Avatar
 
Join Date: Jun 2003
Location: NM
Posts: 2,153
The O2 only has to do with your emission and it does set the CEL off. You'll noticed decrease in gas mileage. But I'm certain it can't be your O2 sensor. But as far as the smell.... that would be depending on where you're smelling it from, rear, side or engine bay.
FanaticMadMax is offline  
Old 11-21-2004, 06:02 AM
  #5  
Senior Member
 
sascuderi's Avatar
 
Join Date: Oct 2000
Location: South Jersey
Posts: 1,329
Those are the three lights that came on when my coils went bad. Have you replaced your coils yet? The coils are bad on the 2Ks

Get the code pulled at Autozone and if it is 1320, then replace all six coils. You'll noticed improved performance and the problem will be gone.

Just a side note, we often need our codes pulled. Can anyone get us a group buy on the OBDII scanners?
sascuderi is offline  
Old 11-21-2004, 03:41 PM
  #6  
Senior Member
Thread Starter
iTrader: (5)
 
PearlWhtMaX2000's Avatar
 
Join Date: Oct 2003
Location: Boston!!!
Posts: 3,726
ok i went to autozone and yes the code was 1320. so does this mean its def the coils? if it is, than should i have the dealer do them? and how much Thanx
PearlWhtMaX2000 is offline  
Old 11-21-2004, 07:43 PM
  #7  
Senior Member
 
sascuderi's Avatar
 
Join Date: Oct 2000
Location: South Jersey
Posts: 1,329
Most likely the coils. I would do it yourself unless you have a warrantee. They cost $300.00 for all six. You can buy from Dave B (number in the sticky) and if you can replace spark plugs you can likely do the coils. I've read dealers can charge $600-800 for the job.
sascuderi is offline  
Old 11-21-2004, 10:08 PM
  #8  
Senior Member
Thread Starter
iTrader: (5)
 
PearlWhtMaX2000's Avatar
 
Join Date: Oct 2003
Location: Boston!!!
Posts: 3,726
Damn thats alot more than i expected!!
PearlWhtMaX2000 is offline  
Old 11-22-2004, 05:59 AM
  #9  
Senior Member
iTrader: (8)
 
2kVQboodah's Avatar
 
Join Date: Oct 2004
Location: Central MA
Posts: 636
i doubt it's O2 sensor too, the CEL does go off but no smell. my O2 sensor blew right after i got my car so of course the dealer had to replace that. did you run the car hard pearlwhtmax2000?
2kVQboodah is offline  
Old 11-22-2004, 07:17 AM
  #10  
Senior Member
Thread Starter
iTrader: (5)
 
PearlWhtMaX2000's Avatar
 
Join Date: Oct 2003
Location: Boston!!!
Posts: 3,726
na i didnt i was just driving back from a friends house. but im ganna go to the dealer later today and see what they say.

Thanx alot for all the help guys. ill post again when i get back and let u know what they say
PearlWhtMaX2000 is offline  
Old 11-23-2004, 05:13 PM
  #11  
Senior Member
iTrader: (8)
 
2kVQboodah's Avatar
 
Join Date: Oct 2004
Location: Central MA
Posts: 636
sure no problem. im just curious pearlwhtmax2000 how's the dual exhaust for your car and how much did you spend on that?
2kVQboodah is offline  
Old 11-23-2004, 08:53 PM
  #12  
Senior Member
 
sascuderi's Avatar
 
Join Date: Oct 2000
Location: South Jersey
Posts: 1,329
Let us know what they say and how much they want to take you for.
sascuderi is offline  
Old 11-25-2004, 09:09 AM
  #13  
Senior Member
Thread Starter
iTrader: (5)
 
PearlWhtMaX2000's Avatar
 
Join Date: Oct 2003
Location: Boston!!!
Posts: 3,726
ok the dealership wants to charge me $850 for all 6 coils including labor. i went to my mechanic, and he said hes ganna charge me $75 per coil plus 150 for labor. so i think im ganna go through him.

one question though my CEL is off now how could that be?? it just turned off. i mean the coil couldnt just fix it self right? im thinking that maybe the light burnt out? and is it bad to drive around w/ bad coils??

2kVQboodah i posted in your thread about the dual exhaust. pm or e-mail me w/any questions. and for more pics they are on my cardomain page
PearlWhtMaX2000 is offline  
Old 11-25-2004, 03:54 PM
  #14  
drag racing is for wussies
iTrader: (15)
 
BlackBIRDVQ's Avatar
 
Join Date: Nov 2002
Posts: 6,023
75 a coil is ALOT of $$$, thats 450 for all 6 coils and 150 to repleace em. You can get the coils from Dave B, and do it yourself. I think I will have to make a HOW TO for the MAF and the COILs for the 3.0 guys cause it makes me sick to my stomach to see someone spend 150 dollars to install coils- where it takes no more than 5 min to do all 6 coils ! I would like to know what your mechanic charges for a clutch or wheel bearing job !! PearlWhtMaX2000 please order the coils from Dave B, and wait for my HOW TO post, cause its just killn me to see ya guys spend soooo much on a such a EZ job.
BlackBIRDVQ is offline  
Old 11-25-2004, 10:59 PM
  #15  
Senior Member
Thread Starter
iTrader: (5)
 
PearlWhtMaX2000's Avatar
 
Join Date: Oct 2003
Location: Boston!!!
Posts: 3,726
Yeah im def ganna go w/ Dave B for coils but i dont think im ganna want to install them my self, cus i hear the back 2 are hard to reach. i wouldnt wanna mess anyhting up.
PearlWhtMaX2000 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
my03maxima
7th Generation Maxima (2009-2015)
9
07-28-2024 07:40 AM
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM



Quick Reply: Did i blow an 02 sensor?????



All times are GMT -7. The time now is 11:03 PM.