weathertech window guards
I forget where I got them, I have Sterling Mist also and I got the lighter shaded ones instead of the dark tint ones. Very easy to install thats for sure!!!! Let me search and see where I got them!!!!
Heres the link where I got them
http://weathertech.com/store/vehsear...pt_choice_id=0
Heres the link where I got them
http://weathertech.com/store/vehsear...pt_choice_id=0
I have a set for the 5th gens that i am thinkin about selling.
Let me know if your intrested!
PM or email - morovasa@shu.edu
Let me know if your intrested!
PM or email - morovasa@shu.edu
I bought mine straight from weathertech. BTW for those of you who have them, how did your fitment hold up, a couple of mine seem to be sagging now and a bit loose when the window is open. I am afraid they are going to fall out....
This thread reminded me of how mine were loose so I finally got around to emailing MacNeil Automotive (WeatherTech) asking them if they had any suggestions on why mine are loose and heres what they replied:
I am impressed with their service and I will try this method and see if it helps. I feel like I am hijacking your thread.....sorry. BTW I have the dark ones.
Dear Mr. xxxxxxxx:
Thank you for your business with MacNeil Automotive Products.
The Side Window Deflectors should remain tight always. Occasionally there can be a negligible contracting of your rubber strip in your door, but not enough to greatly affect the fit of the deflectors. A way to rectify this is to remove them and reinstall them with the window rolled up about 3 inches from the top, leaving a gap. The deflectors may have slipped out of perfect alignment somehow (that is usually the problem, and this almost 99%of the time this will correct it) , and that is causing them to be loose. Try this installation method and keep windows rolled up for 48 hours. If they are still loose, let me know, and I will try another solution.
If you have any questions, do not hesitate to call us.
Thank you for your business with MacNeil Automotive Products.
The Side Window Deflectors should remain tight always. Occasionally there can be a negligible contracting of your rubber strip in your door, but not enough to greatly affect the fit of the deflectors. A way to rectify this is to remove them and reinstall them with the window rolled up about 3 inches from the top, leaving a gap. The deflectors may have slipped out of perfect alignment somehow (that is usually the problem, and this almost 99%of the time this will correct it) , and that is causing them to be loose. Try this installation method and keep windows rolled up for 48 hours. If they are still loose, let me know, and I will try another solution.
If you have any questions, do not hesitate to call us.
I've seen some kit on customenterprise 4 59$+S&H http://www.customenterprise.com/view.../vts/design004
the is 3 points: 1 when u have 'em and driving with open windows on a highway wind isn't blowing stright in your face. 2 point is a smoker point while it's raining door won't get wet (I mean interior) and 3 point is better look w/'em esp when u have tint imo
r they simmilar to what custenter carrys?
BTW I have the dark ones.
Member
Joined: Aug 2004
Posts: 43
I have the dark ones, I love them. I had no problems installing them and have no problems with them coming lose. Mine are definitely in there for good. My gf got mine from this website I think:
http://accessory-center.com/default.plx/30/5233
I'm pretty sure she got them for around $85 before shipping for a set for all 4 windows. I hope this helps.
http://accessory-center.com/default.plx/30/5233
I'm pretty sure she got them for around $85 before shipping for a set for all 4 windows. I hope this helps.
Originally Posted by Nomad
r they simmilar to what custenter carrys?
The Custom Enterprise ones are the Auto Ventshade stick on ones. They will cover up the chrome window trim on 5th gens. I had these for a while and they did their job but I didn't like how they covered up the chrome. The WeatherTech ones mount inside the window channel and don't look as clunky as the Ventshade ones imo.
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM
