Wheels Finally On
03-27-2005, 10:21 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
Wheels Finally On
Hey fellow orgers just checking in with an update. I just recently bought these new wheels for my max.
Let me know what the community thinks, honesty is appreciated and good or bad feedback is welcome.
Let me know what the community thinks, honesty is appreciated and good or bad feedback is welcome.
03-27-2005, 10:37 PM
#5
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
there are more close up pictures like you asked for at
http://community.webshots.com/user/dvs_01maximase
http://community.webshots.com/user/dvs_01maximase
03-27-2005, 10:41 PM
#7
Senior Member
Join Date: Sep 2000
Posts: 1,223
Originally Posted by under5295
I cant even see the pic either beer20 howd you see it did it just come up?
03-27-2005, 10:42 PM
#9
The wheels are ... different... ? I do like the drop though... JICs? Very nice.... guess it'll be easier to spot your car on campus now...
Another thing, I'd lose the pinstripe if I were you... doesn't really go...
Btw, how does an undergrad like you get all that money for rims and coilovers?
Another thing, I'd lose the pinstripe if I were you... doesn't really go...
Btw, how does an undergrad like you get all that money for rims and coilovers?
03-27-2005, 10:45 PM
#11
Originally Posted by under5295
lol im a shisty ***** p-Masta this you should know. I work for the government!
03-27-2005, 10:46 PM
#12
Donating Maxima.org Member
Join Date: Aug 2004
Posts: 153
Originally Posted by Puppetmaster
The wheels are ... different... ? I do like the drop though... JICs? Very nice.... guess it'll be easier to spot your car on campus now...
Another thing, I'd lose the pinstripe if I were you... doesn't really go...
Btw, how does an undergrad like you get all that money for rims and coilovers?
Another thing, I'd lose the pinstripe if I were you... doesn't really go...
Btw, how does an undergrad like you get all that money for rims and coilovers?
yeah i would say lose the pinstripe too,its a pain in the *** though...
03-27-2005, 10:54 PM
#15
Donating Maxima.org Member
Join Date: Aug 2004
Posts: 153
Originally Posted by under5295
Lots of folks have the same opinion about the pin strip even myself. But im not sure where or how to have it taken off?
goo gone and lots of time.
i use to have a dark green ford ranger about 10 years ago,it had purple pinstrips on it.those had to go first thing.
03-27-2005, 11:02 PM
#18
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
Originally Posted by frankd121
Probably pretty heavy tho...
bad I think the stockers on a max are what 25 or 26 correct me if im wrong
03-27-2005, 11:10 PM
#20
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
Originally Posted by roll4life
whats the offset on them?
but I dont see where the manufacturer lists an offset
time to call and hassle them a bit for not listing this
information lol
03-28-2005, 12:00 AM
#24
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
Originally Posted by Deckdout2
I like'em cause they're different.
a great percentage of the org's members. I enjoy being quniue long as things do
not get rice or too clishey and such. Only the best for out Maxima's Right!!!!!!!!!
Oh yea like your rims too Deckdout2 I had seen yours a while back when browsind the Org before.
03-28-2005, 12:13 AM
#25
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
Originally Posted by Puppetmaster
Very nice.... guess it'll be easier to spot your car on campus now...
Btw, how does an undergrad like you get all that money for rims and coilovers?
Btw, how does an undergrad like you get all that money for rims and coilovers?
The inside is still GHETTO as HELL! With no glove box, center consol, or passenger side seat.
thats why I got the tint so dark. HAHAHA plus it makes all the mason hoochies wet when I roll by
03-28-2005, 12:43 AM
#27
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
Originally Posted by whazzzzuup
I think the drop and wheels look pretty good. What's up with the hood fitment?
right though whats up with that?? It is an authentic VIS Racing carbon fiber hood and
I admit there is a slight elevation causing that miniature fitment issue/gap I am almost
positive with some slight adjustment of the rubber hood bumpers and front latching
mechanism I could eliminate this problem. However, I am currently to lazy to do jack.
03-28-2005, 02:38 AM
#28
im definetly going to get flamed for this but try using brake cleaner and just a little. i used it and became really easy to just wipe off the pinstripe. My clearcoat isnt messed up. Also, my mom scratched her highlander and left a huge paint scuff. Used a little brake cleaner and the paint scuff vanished. Her clear coat is fine also. But use the brake cleaner in a very inconspicuos area first.
03-28-2005, 03:00 AM
#29
Senior Member
Thread Starter
Join Date: Dec 2004
Posts: 155
y would you get flamed it might work lol I see you saw my moms highlander too. LoL I
actually was just driving it and bumped this old rusty pole when revesing so I might see
if this technique will help remove some of that transfer. But like you said test it on a
very inconspicuous part of the car like a painted part underneath, because the chemicals
in brake cleaner are harsh on paint thats you this could both work and easily go wrong
overall good input though thanks man.
actually was just driving it and bumped this old rusty pole when revesing so I might see
if this technique will help remove some of that transfer. But like you said test it on a
very inconspicuous part of the car like a painted part underneath, because the chemicals
in brake cleaner are harsh on paint thats you this could both work and easily go wrong
overall good input though thanks man.
03-28-2005, 05:34 AM
#30
definately get rid of the pin stripe.....It takes a while, but worth it in the end. Try using a hairdryer and there is a product that 3M makes that helps when taking off adhesives. I picked it up at Advanved Auto Parts or Walmart....not expensive, about $5/can. Goo Gone works well also. Rims are unique. If you like them, thats all that matters.
03-28-2005, 07:10 AM
#32
Originally Posted by under5295
lol goo gone might as well try paint stripper
03-28-2005, 08:56 AM
#34
sick ride bro... i cant wait to put my shiet all on. just waiting to install my coilovers on then it'll look real sick with my wheels too. i only got 18's though. but those 19's are tight! i'll probably get 19's soon.
