Can someone post or email me the ecm diagram for a 2000 fed spec.

Thanks
Chris

 

...what part/pin/input/output are you looking for specifically?

 

for hooking up injector harness. I hooked it up yesterday and couldn't get a duty cycle reading. I then looked at my FSM and realized it is for the european maxima and i don't know if their ECU is different

 

Injector #1:Red/Black to ECU pin#101
Injector #2:Red/White to ECU pin#103
Injector #3:Red/Yellow to ECU pin#105
Injector #4:Red/Light Blue to ECU pin#107
Injector #5:Light Blue/White to ECU pin#102
Injector #6:Purple/Red to ECU pin#104

 

BTW, ignore the tach/knock/MAF/ground/TPS/Power/etc. pins in that diagram, since they're for a 2K2.

 

Tach - Pin #25 White/Green.
MAF - Pin #61 White.
TPS - Pin #91 Light Blue/White.<~~~DOUBLE CHECK!!!!!
Power - Pin #110, #112 Red/Green.
Ground - Pin #48, 57 Black.

 

well $hit. I have the harness hooked up correctly. The support tool isn't showing me the injector duty cycle. Do you have to activate it after installing the harness?

 

Once you're "Online"...just follow the manual page 35, ie click "Input Data Setup" and check box the injector options.

I can't access that, I only have the Support Tool and you must be communicating to use the Real Time/Graph/Record modes.