BeSeenWithGreen

iTrader: (4)

My body was trying to be funny and unplugged the TPS plug. So I got the SES light on. Will it turn off by itself or do I need to reset the ECU? Thanks Greg.

Stardust

iTrader: (10)

Disconnect the battery and call it a day

BeSeenWithGreen

iTrader: (4)

I thought that does not work on02-03 but I'll give it a shot

Stardust

iTrader: (10)

it should work on all 5th gens

LA02MAX

iTrader: (3)

nope, this is how to do it: http://maxima.theowensfamily.com/ecu.asp

the 5.5 gens are totally different than the 5th gens...that's a very common misconception...

BeSeenWithGreen

iTrader: (4)

Thanks I try it tomorrow

jasba

In another thread someone mentioned that timing is critical in the process to reset your ECU, I agree. I tried it about 15 times before I got it right, but the light has not come back on so far....[fingers crossed]....

02SE6MT

i just tried exactly what theowensfamily.com said to do, many times i tried, still i cannot get the engine light to light after waiting the 7 seconds and pressing gas for 10. any reccomendations? thanks in advance

boris

[/QUOTE]many times i tried, still i cannot get the engine light to light after waiting the 7 seconds and pressing gas for 10. any reccomendations? thanks in advance[/QUOTE]

I'm a musician and i use my metronome for timing (beep-beep-beep once a second..) Never got wrong. 1st beep - turn the key; 4th - floor the pedal 5 times, once on each beep; wait 7 beeps, on 8th floor again and wait at least 11 beeps (actually a little more till the light starts blinking). Release the pedal. Read the codes if needed. Floor it again for 11 or more beeps (the longer the better to be sure). Return the key to off position and you are done. Good luck.