sublimer

iTrader: (7)

Can anyone post pics of a debadged Max with only the Nissan emblem left on the trunk??? Also, is there write up for this because I searched and couldnt find one...Thanks.

SoonerFan

iTrader: (5)

shaved with smaller Nissan emblem

bugbite77

iTrader: (14)

no pics but i know how to do it, take your hair dryer, heat up thoes letters, take some dental floss, saw thoes suckers off, take some googone 2 get the rest of the adhesive off.

SoonerFan

iTrader: (5)

thats how i did mine...most important thing is to heat it up.

Greeneyes

iTrader: (3)

Same color as yours too, I didnt aske for it but after I saw it like this after getting painted I liked it and kept it this way.

sublimer

iTrader: (7)

so the letters just dont peel off? they need to be "sawed" off? Also, can anything else be used to get the adhesive off, such as regular household items.

gsumax

iTrader: (2)

you could use a degreaser, like orange clean stuff, but make sure you use it sparingly as it takes off your wax and exposes your clearcoat, and youd have to rebuff the spot with some fresh wax

SoonerFan

iTrader: (5)

the letters themselves will peal off...but not the adhesive tape. you want to heat it up so it losens up. and you are using the dental floss to get as close to the metal as possible. most of the tape will come off but you will need goo gone to get the rest

Lontar1

iTrader: (5)

I like it better with the badges.... but it looks Ok......

00Max00

Hey there who posted their debadged Maxs, I meant the car looks whole lot better with the badge than with the downright ugly dealer license frame.

SoonerFan

iTrader: (5)

thats 3 days after i got the car...that plate is long gone. im just too lazy to put new pics on cardomain

the paragon

iTrader: (11)

Glue Gone helps too! just a towel and dab some of the stuff on it.

dominican254

iTrader: (13)

Check out my home page if u wanna see pics of my debadged trunk. Goo Gone is what i used and it worked fine. W/E u use make sure its not strong enuff to take ur paint wit it lol

Max'dMatt2k3

any debaged glacier pearls???

spencediggy

iTrader: (1)

does anybody knows..who does custom emblems in new york???????????
i'd always wanted one to say "MAXXIUM".

UGAd13

Whoomp there it is! Tag Team back again...

00MaxSE

iTrader: (25)

Here ya go.

Ammi

iTrader: (26)

SEmy2K2go

iTrader: (10)

Metal Maxima

iTrader: (30)

METHOD I:
Take a heatgun and simply heat the emblem. After a minute or two the emblem should loosen up and you can peel the ebmlem off.

METHOD II:
Use dental floss and slowly saw through the adhesive.

With either method, you will need to use GOOF OFF in order to safley remove any residual adhesive.

If you decide to go all out and shave the entire rear, I created a how-to for the hamburger HERE.

Shot sucks, but nonetheless:

pruizgarcia

iTrader: (1)

I heated it up with a heat gun, then use real thin dental floss. I then used the goo off, clean it up, then used some scratch off stuff. I finished it up with some wax. See my sig for a pic.

resurrectedmax

iTrader: (11)

silversurfersg

wow! look at all that fine tail!

NISMAX03

iTrader: (4)

Here is my Glacier Pearl.

rbneron

My website shows pics sans badge; even has a how-to.

djsoniq

iTrader: (1)

Here ya go, one in my signature too...

sublimer

iTrader: (7)

thanks a lot guys. This is definately an easy mod I'll be doing in the future. It makes the trunk look much cleaner. I was just wondering where the goo gone could be purchased (hope depot? etc)

cutter

iTrader: (1)

My friend and I just debadged his civic. All of the badges came off nicely, but the EX left like a peel in the paint and the paint color was mismatched. I am hesitant to do this mod.

rkyat

iTrader: (3)

00MaxSE

iTrader: (25)

Home Depot will have it or Walmart or Kmart or any hardware store.

icelandmaxima

iTrader: (22)

this is just an excuse to show some azz.

WhatRuOn

Beware of faded paint....on my old 4th gen that I shaved the paint behind it was considerably darker then the rest the car...but I guess that depends on the color.

Anarchist

I'm guessing there is no way to reapply the badges? I like the idea, but when resale time comes it's no good.

bugbite77

iTrader: (14)

ofcourse you can reapply, some 3M tape should do the trick, (or you can purchase the letters at any nissan dealer thats already have adhesive on the backs) just take proper measurements of where the letters are located, write them down and throw the measurements in a bag with the letters, put em in the box with all your stock stuff (bc any smart modder always keeps all his stock parts) and your good to go.

oooooooooooooo idea, does anyone have there stock 2002/2003 maxima letter badges they would like to sell to me? pm me if you do!!!!!!!!!!!!!!!!!

RicoSuave98

iTrader: (2)

fishing line works too cuz when i did mine the dental floss kept breaking- 8 lb test should do the trick. and goof off is a must

and i was wondering why 5th gen usually leave the burger? it was the first thing to go on my max. is it because the license plate frame is cut for it? i think MetalMaxima's is hot- just my .02

sublimer

iTrader: (7)

did anyone have problems with paint when they debadged? I'm nervous that the glue will leave marks on the paint, or will take the paint with it when it comes off. Also, that the paint under may be faded. If I see this, can I just reapply the badges?

SoonerFan

iTrader: (5)

because it isnt just on with tape. there are 2 plastic pegs on the emblem that go in to HOLES in the trunk. on my 00 i removed mine, filled in the holes, and painted it. on my 02 i removed the huge stock one and used a smaller one from a pathfinder

Icondapython

iTrader: (1)

Look at all those Maximas without the emblems, so beautiful.