Is this put together right?????

Does anyone know the torque specs of the strut tower???





I'm putting it together as we speak....Thanks

 

The torque specs are in this thread, note the dust boot is torn from the top, you may need a new one.

https://maxima.org/article-print-6.html

 

I did some thing wrong. The way it is in the picture doesn't allow the strut enough room the stick out of the top mount. Can some one take a good look at the pics and tell me what I'm doing wrong????

 

Hey man I left a post in the general forums but figured you may see it here better.

OK I got it figured out.

Remove the 3 pieces except the boot

1) Take the metal piece flip it the other way and slide it on over the boot it should sit on the boot like an umbrella - shouldnt see top part of boot
2) Take the large bushing the one with the lines through it and place it on top of the metal piece
3) Add spring have to compress it
4) Add upper spring seat rubber
5) Add shock absorber mounting bracket then mounting seal
6) Add that small bushing left over from the 3 parts we took off
7) Add washer then center nut and tighten and release compression on spring
8) Enjoy

-Brad

 

 

Guys,

Thanks a Million!!!!!! I really apericate the help