Exhaust ?
#1
Exhaust ?
O.K., I know this is probably a worn out question, but can anyone point me in the right direction for choices and sound clips on exhaust systems. It's time to replace the factory! Many Thanks!
#2
Personal Preference: Cattman Exhaust
Here are sound clips:
http://forums.maxima.org/showthread.php?t=407975
Here are sound clips:
http://forums.maxima.org/showthread.php?t=407975
#3
Thanks for the clips! I am looking for a nice deep sound not too over powering. I have a franken car b pipe w/ a JMT filter. I kind of like the Frankencar cat back. Anyone have any opinions on that?
#10
Does anyone know if Frankencar is still producing these cat back systems anymore? I tried calling the main line only to get a disconnected message then tried to call the second man in charge and got his V.M.
#11
Frankencar makes em in waves and disappears every so often because this is their side business (they all have other full time jobs). They may have a batch ready in the near future, but I wouldn't hold my breath for it. They do make GREAT parts and for reasonable prices so if you do get a hold of them or one of their cat-backs, you won't regret it.
And one more time for good measure:
http://forums.maxima.org/showthread.php?t=407975
And one more time for good measure:
http://forums.maxima.org/showthread.php?t=407975
#15
sfor the hangers you dont need to buy new ones unless you want to spend the money. if you want to save money then buy metal hose clamps and put them around your oem hangers.
heres a pic of the metal hose clamps to put around your oem hangers:
heres a pic of the metal hose clamps to put around your oem hangers:
![](http://ace.imageg.net/graphics/product_images/pACE2-953360dt.jpg)
#16
And here's what they look like on the OEM hangers:
![](http://memimage.cardomain.net/member_images/10/web/694000-694999/694087_198_full.jpg)
Or just get some Nismo or Napa rubber hangers to replace the stock hangers; they are stiffer and hold the rear section in place better.
![](http://memimage.cardomain.net/member_images/10/web/694000-694999/694087_198_full.jpg)
Or just get some Nismo or Napa rubber hangers to replace the stock hangers; they are stiffer and hold the rear section in place better.
#18
i went with eurothane hangers, honeslty theyre the cheap ebay ones i think i got 4 for like 20-25bucks shipped. my stock ones were in really bad shape. the new ones are perfect, no noises since.
i dont know why i dint think of the clamp idea. my hangers are a cool ricer blue
i dont know why i dint think of the clamp idea. my hangers are a cool ricer blue
![Laugh out loud](https://maxima.org/forums/images/smilies/lol.gif)
#22
#24
Originally Posted by DUKEE
how many hangers do you need when replacing the catback? just want to know how many i need so i can replace the hangers while im doing it
http://forums.maxima.org/showpost.ph...2&postcount=24
#25
Originally Posted by jimz02max
Since I can not get a hole of a Frankencar set up I am going with the Cattman. Anyone know the best place to buy 1?
Also, look around the Stickies a bit for answers to your questions:
http://forums.maxima.org/showpost.ph...2&postcount=25
#29
Originally Posted by spdfreak
BTW if you have a Frankencar B-pipe, why don't you just get the missing parts to complete a Frankencar cat-back?
My first choice is to buy the Frankencar cat-back, but I can't get intouch with the people at Frankencar. I can't wait either, my hanger is broken on the oem b-pipe...rusted right off!
#31
So, i just got my Frankencar catback installed. I think i should have installed some new hangers at that point because i can hear some rattling going on in the rear. Is it a pain to replace all 4 hangers. Do you need to take off the whole catback again? Thanks!
#33
Originally Posted by DUKEE
Do you need to take off the whole catback again? Thanks!
I say just try hoseclamps for the hangers on the rear section first:
![](http://memimage.cardomain.net/member_images/10/web/694000-694999/694087_198_full.jpg)
If that doesn't work then try getting the stiffer rubber hangers.
#35
Originally Posted by DUKEE
I got it from Ammi on the .org. What size hoseclamps did you get?
I'm not sure what size hoseclamps, because Frankencar included them with the cat-back when I bought it. It doesn't really matter though, as long as they are big enough to fit over the hangers, you are gonna tighten em anyways.
Yes, I bought a FC cat-back some time back but sold the rear, and now I want one back.
#36
AH gotcha. Yah he was in my area this weekend so i picked it up from him right away! I was so desperate for one. It sounds amazing. My next step is to install these HotShot Headers that are in my garage! Btw, love your pic hah.
#37
Originally Posted by Puppetmaster
No. Just jack the rear end up and you should be able to reach all of em. You'll have to get under the car to get to the b-pipe hanger though.
I say just try hoseclamps for the hangers on the rear section first:
![](http://memimage.cardomain.net/member_images/10/web/694000-694999/694087_198_full.jpg)
If that doesn't work then try getting the stiffer rubber hangers.
I say just try hoseclamps for the hangers on the rear section first:
![](http://memimage.cardomain.net/member_images/10/web/694000-694999/694087_198_full.jpg)
If that doesn't work then try getting the stiffer rubber hangers.