jonlawrence

Can someone give me some pointers on installing a lip on my 00?
I got a bag of hardware and not sure where to put them.
I also dont't want to scratch up my bumper on the install/
Anyone got some pointers?

upstatemax

iTrader: (15)

I could use a good write-up on this also... Pics would be great.

OutMaxxed

iTrader: (7)

well i bought an ABS Dynamics lip and it came with 4 screws. I put 2 screws on on the left wheel well and the other 2 on the other wheel well. And in the middle where the lip rests(the bottom openining where u can see the botom of the radiator i put a piece of double sidded sticky tape) I also cut slits on each side of the lip b/c the lip flares out on the sides and when u push it in, it will have to give way somewhere in the lip and when it did it created little white marks where it gave way.
Hope this helps. might be hard to understand..

shift_2kmaxima

iTrader: (4)

^^^^^thats what i also did, and i used 3 screws on each wheel well...and i used 3m double sided tape (for outdoors only) to put where the lowere opening thingy is....

upstatemax

iTrader: (15)

The Stillen lip comes with a whole bunch of long spike thingies, it looks like they go on the front of the lip but I am not sure.

BRINKLEY

iTrader: (4)

I don't know upstatemax, but I wish you would hurry the hell up and get some pics on here........geeeeeeeeeez. lol

upstatemax

iTrader: (15)

BlackbirdVQ has just a Stillen lip installed and he just posted pics...

http://forums.maxima.org/showthread.php?t=467312

It will look even better when he drops the rear again.

AceofSpds

iTrader: (4)

Doesnt someone have a write up on their cardomain? ive sceen it before, but that was like half a year ago

roll4life

iTrader: (2)

im planning on installing my stillen front lip this monday or tuesday so ill take pics

hopefully ill do it right haha

Lontar1

iTrader: (5)

really easy..just get four screws and you'll be done. get some 3M tape to put on the sides and middle of the bumper. If you haven't painteed it yet it is better to do the holes before painting it