OSCAI v3.0 in Works
Thread Starter
Senior Member
Joined: Aug 2000
Posts: 1,642
Hehe ... I was recently at a Ricer shop ... and I happend to stumble upon a "SPECIAL" that they were having, and I've been able to Pick out a Brand New Item for the "OSCAI"
I've done some Measuring and stuff and it "SHOULD" Work ... I just need $90 (Canadian)
If I get it ... I'll have ALL the Power of a CAI without Voiding Warrenty!
I've done some Measuring and stuff and it "SHOULD" Work ... I just need $90 (Canadian)
If I get it ... I'll have ALL the Power of a CAI without Voiding Warrenty!
I am still on OSCAI version 1.0. I need to upgrade.
Senior Member
Joined: Nov 2000
Posts: 1,983
i guess im somewhere near OSCAI 2.0 cause my 1.0 was just a pipe going down to the splash guard... my 2.0 i cut the splash guard out and i routed the pipe under the radiator and into the front airdam facing forward to get a total ram-air effect... but i bent the pipe on the bottom a little... coming out of a steep drive way... i didnt bother fixing it yet cause im waiting for Hogans new intake to come out!
Senior Member
Joined: Aug 2000
Posts: 3,528
Hrmm... Maybe instead of 1.0 and 2.0.. we should name stages like turbos...
Stage I: Removed L-Pipe or cut hole in scoop (for 2k1 models)
Stage II: Downpipe
Stage III: K&N Panel
Stage IV: Some sort of ram air
Stage V: Stillen SC
Stage I: Removed L-Pipe or cut hole in scoop (for 2k1 models)
Stage II: Downpipe
Stage III: K&N Panel
Stage IV: Some sort of ram air
Stage V: Stillen SC
Originally posted by punkdork
Hrmm... Maybe instead of 1.0 and 2.0.. we should name stages like turbos...
Stage I: Removed L-Pipe or cut hole in scoop (for 2k1 models)
Stage II: Downpipe
Stage III: K&N Panel
Stage IV: Some sort of ram air
Stage V: Stillen SC
Hrmm... Maybe instead of 1.0 and 2.0.. we should name stages like turbos...
Stage I: Removed L-Pipe or cut hole in scoop (for 2k1 models)
Stage II: Downpipe
Stage III: K&N Panel
Stage IV: Some sort of ram air
Stage V: Stillen SC
I am at stage IV!
Originally posted by bcannon
We should found the Ooglie Research University. Have it be a new message board on the site where the ooglie inventors could share tips and how-to's.
We should found the Ooglie Research University. Have it be a new message board on the site where the ooglie inventors could share tips and how-to's.
I would be a distinguished professor on the faculty of ORU. Good idea...
Originally posted by bcannon
We should found the Ooglie Research University. Have it be a new message board on the site where the ooglie inventors could share tips and how-to's.
We should found the Ooglie Research University. Have it be a new message board on the site where the ooglie inventors could share tips and how-to's.
hehehehe....can I be the Dean?
Senior Member
Joined: Apr 2001
Posts: 605
I am in charge of the girl's cheerleading (aka bikini) team, try outs are at my house friday night, bring a bottle of liquor and wear you skimpiest outfit... ex-XFL cheeleaders are welcome...
We need a dean for each college...
College of Intakes and Throttles
College of Suspension
College of Engines and Transmissions
College of Body Modifications
College of Decorative Arts (Rims, Paint, tints, etc)
College of Interior Design (panels, leather care etc)
What did I miss?
Oh yeah, College of Audio Engineering...
We need a dean for each college...
College of Intakes and Throttles
College of Suspension
College of Engines and Transmissions
College of Body Modifications
College of Decorative Arts (Rims, Paint, tints, etc)
College of Interior Design (panels, leather care etc)
What did I miss?
Oh yeah, College of Audio Engineering...
ORU Mission Statement:
Ooglie Research University is a public research university committed to achieving Ooglie excellence in providing solutions and Ooglie education for the Nissan Maxima. To realize its aspirations and fulfill its mandates, the University advances knowledge and provides superior and innovative instruction in a broad range of Ooglie disciplines and interdisciplinary fields.
our mascot:
\
Ooglie Research University is a public research university committed to achieving Ooglie excellence in providing solutions and Ooglie education for the Nissan Maxima. To realize its aspirations and fulfill its mandates, the University advances knowledge and provides superior and innovative instruction in a broad range of Ooglie disciplines and interdisciplinary fields.
our mascot:
\
Originally posted by UMD_MaxSE
ORU Mission Statement:
Ooglie Research University is a public research university committed to achieving Ooglie excellence in providing solutions and Ooglie education for the Nissan Maxima. To realize its aspirations and fulfill its mandates, the University advances knowledge and provides superior and innovative instruction in a broad range of Ooglie disciplines and interdisciplinary fields.
our mascot:
\
ORU Mission Statement:
Ooglie Research University is a public research university committed to achieving Ooglie excellence in providing solutions and Ooglie education for the Nissan Maxima. To realize its aspirations and fulfill its mandates, the University advances knowledge and provides superior and innovative instruction in a broad range of Ooglie disciplines and interdisciplinary fields.
our mascot:
\
Maybe I'll just be a Professor At Large, since I have experience and expertise in almost all of our fields of study and instruction...
![[maxi-overdose]'s Avatar](https://maxima.org/forums/customavatars/avatar1856_1.gif){kind=avatar}
To Empz and those who cut their splash guard
Empz: tell us more detail....so we know our $$$ goes to ur R&D on OSCAI but not on girls =) j/k
Those ppl who cut their splash guard....
my OSCAI faces foward aslo and instead of cutting it....I drill about 20 holes on the splash guard. My question is....how much air does our OSCAI really need? cutting holes seems to expose OSCAI to the environment and more dirt will be sucked in...and therefore, more work for our filter.
Those ppl who cut their splash guard....
my OSCAI faces foward aslo and instead of cutting it....I drill about 20 holes on the splash guard. My question is....how much air does our OSCAI really need? cutting holes seems to expose OSCAI to the environment and more dirt will be sucked in...and therefore, more work for our filter.
To Empz and those who cut their splash guard
Empz: tell us more detail....so we know our $$$ goes to ur R&D on OSCAI but not on girls =) j/k
Those ppl who cut their splash guard....
my OSCAI faces foward aslo and instead of cutting it....I drill about 20 holes on the splash guard. My question is....how much air does our OSCAI really need? cutting holes seems to expose OSCAI to the environment and more dirt will be sucked in...and therefore, more work for our filter.
Those ppl who cut their splash guard....
my OSCAI faces foward aslo and instead of cutting it....I drill about 20 holes on the splash guard. My question is....how much air does our OSCAI really need? cutting holes seems to expose OSCAI to the environment and more dirt will be sucked in...and therefore, more work for our filter.
Thread Starter
Senior Member
Joined: Aug 2000
Posts: 1,642
LOL ... STUPID
U guys are Funny!
Well ... What Position do I GET in the University???
So ANY Contributions yet???? Read BELOW
-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-
For $90 (Canadian) I will be able to get a FULL Polished Intake Pipe, ... Which I will work into the Existing OSCAI and I'll be able to have a CAI hooked up to it!!!!!!
I'll just have an EXTRA "Pop Charger Filter" which I'll SELL!
YES $90 for Filter AND Intake Pipe!!!!!!!!!!!!!!!!!!!!!!!
Well ... What Position do I GET in the University???
So ANY Contributions yet???? Read BELOW
-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-
For $90 (Canadian) I will be able to get a FULL Polished Intake Pipe, ... Which I will work into the Existing OSCAI and I'll be able to have a CAI hooked up to it!!!!!!
I'll just have an EXTRA "Pop Charger Filter" which I'll SELL!
YES $90 for Filter AND Intake Pipe!!!!!!!!!!!!!!!!!!!!!!!
Re: LOL ... STUPID
that means our OSCAI looks ghetto no more?
but it is a long route from the splash guard to the scoop then the airbox and finally to our engine....but worth a try, I will donate some $$.
or maybe we can seal the front opening of the scoop after the new filter is installed...
but it is a long route from the splash guard to the scoop then the airbox and finally to our engine....but worth a try, I will donate some $$.
or maybe we can seal the front opening of the scoop after the new filter is installed...
Originally posted by Empz
-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-
For $90 (Canadian) I will be able to get a FULL Polished Intake Pipe, ... Which I will work into the Existing OSCAI and I'll be able to have a CAI hooked up to it!!!!!!
I'll just have an EXTRA "Pop Charger Filter" which I'll SELL!
YES $90 for Filter AND Intake Pipe!!!!!!!!!!!!!!!!!!!!!!!
-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-=-=-=-=--=-=-=-
For $90 (Canadian) I will be able to get a FULL Polished Intake Pipe, ... Which I will work into the Existing OSCAI and I'll be able to have a CAI hooked up to it!!!!!!
I'll just have an EXTRA "Pop Charger Filter" which I'll SELL!
YES $90 for Filter AND Intake Pipe!!!!!!!!!!!!!!!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM