Clear Chrome Tails issue (anyone else with this problem?)
#1
Clear Chrome Tails issue (anyone else with this problem?)
I just installed my new clear/chrome tail lights and I noticed that everything hooked up correctly but the turn signal.
The wire harness and bulb will not insert into the slot. At first I thought mabie the bulb was to wide but then I just took the bulb out and the fitment will not go into the assembly.
Do I need to get another wire harness or is there a work around for this?
The wire harness and bulb will not insert into the slot. At first I thought mabie the bulb was to wide but then I just took the bulb out and the fitment will not go into the assembly.
Do I need to get another wire harness or is there a work around for this?
#2
Check to see if the auto parts store has the same type bulb in a smaller size. If not then you can cut / dremel out the whole a little and 3m it in. I know that is mad ghetto but it will be covered up so no worries.
#4
Stick 3M double sided tape on the Harness face surrounding the bulb. Push it in place inserting the bulb. It will set the bulb in far enough to give you the light you need so there shouldn't be a problem.
That's a cheap fix. If you want to buy the harness then that's an option. Just tryin to save you the money considering that it will be hid anyway.
That's a cheap fix. If you want to buy the harness then that's an option. Just tryin to save you the money considering that it will be hid anyway.
#8
Originally Posted by abraxus22
does anyone know a link of where I can get a 02/03 wire harness for the tail light?
The plug into the light assembly is the same though right?
The plug into the light assembly is the same though right?
#10
Originally Posted by abraxus22
I just installed my new clear/chrome tail lights and I noticed that everything hooked up correctly but the turn signal.
The wire harness and bulb will not insert into the slot. At first I thought mabie the bulb was to wide but then I just took the bulb out and the fitment will not go into the assembly.
Do I need to get another wire harness or is there a work around for this?
The wire harness and bulb will not insert into the slot. At first I thought mabie the bulb was to wide but then I just took the bulb out and the fitment will not go into the assembly.
Do I need to get another wire harness or is there a work around for this?
you need to get the 2002-2003 tail light wire harness........the chrome tails are BUILT TO FIT the 2002- 2003 maximas. But will fit the 2000-2001 maxima as well, BUT YOU HAVE TO GET THE WIRE ADAPTER...i see we are in the same area. I went to Norris Nissan west in ellicot city, i paid like 30 bucks for them. I can get you the part number
#11
Originally Posted by MIXXMAX
Yeah, give Dave B. a call...1-888-254-6060. Since you have a '01, the harnesses are different for the '02-'03's. You must convert over to the '02-'03's in order for it to work. Also, you must change out the turn signal bulb also. The bulb bases from the '00-'01 are slightly different in shape.
yea for the new harness, he wants to use a 7443 bulb for the brake/tail light, a 7440 for the turn signal, and a standard 912 for the reverse
#14
Thread
Thread Starter
Forum
Replies
Last Post
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM
doombot
5th Generation Classifieds (2000-2003)
3
08-24-2015 08:43 PM
yat70458
5th Generation Maxima (2000-2003)
2
08-03-2015 01:16 PM