Suggestions needed for Shroud Project
#1
$$ Ballin on a Budget $$
Thread Starter
iTrader: (47)
Join Date: Mar 2006
Location: North FL.
Posts: 2,189
Suggestions needed for Shroud Project
I've came across a spot that is willing to do a shroud set up for our 5th / 5.5 gens. I need an idea of how you guys would want it to look if you were to get one.
As for myself I am going to have it lay across the opening between the bumper to the radiator. Then I am going to cross over the lights to the bar as well. It will be three pieces. He is going to do the single piece as well as the one I am going to get. ( bumper to radiator )
If you guys have an idea of what you think would look good then let me know. I am going to give this guy my template by weeks end. If I can get enough interest then the prices will be straight.
Edit: This will be in aluminum or you can have it painted at extra cost.
As for myself I am going to have it lay across the opening between the bumper to the radiator. Then I am going to cross over the lights to the bar as well. It will be three pieces. He is going to do the single piece as well as the one I am going to get. ( bumper to radiator )
If you guys have an idea of what you think would look good then let me know. I am going to give this guy my template by weeks end. If I can get enough interest then the prices will be straight.
Edit: This will be in aluminum or you can have it painted at extra cost.
#2
I already did it, I build this by order only, I have the process to fabricate down pat. i get my orders by Pm's I will post up picks for you... any questions PM me.
EDIT: this one is in Carbon.
EDIT: this one is in Carbon.
#5
Originally Posted by doc2278
I already did it, I build this by order only, I have the process to fabricate down pat. i get my orders by Pm's I will post up picks for you... any questions PM me.
EDIT: this one is in Carbon.
EDIT: this one is in Carbon.
#6
$$ Ballin on a Budget $$
Thread Starter
iTrader: (47)
Join Date: Mar 2006
Location: North FL.
Posts: 2,189
Originally Posted by knight_yyz
if it was made of metal and could somehow protect the HID tabs from being cut... that would be cool.
Doing it in three pieces would keep the cost down (qoute) So there will be a center piece and/or three piece.
Like I said... I am going to do my template and have it to this guy be weeks end. That being said as soon as I get the price qoute and prototype done I will post it up for all to see.
#9
Originally Posted by JdoubleOe703
doc:... how much, i thought u said u stopped making them... let me know if you can make one is red carbon fiber...
http://www.cardomain.com/ride/752140/12 this is the progression of the shroud to what it is now (raw form B4 its trimmed out)
#12
Originally Posted by doc2278
I did stop, But I have the project back on track now, new composites and resins ftw!!! I can make one in red aramid fiber with carbon inlays. Would that work for you? I will send you a PM for the price.
http://www.cardomain.com/ride/752140/12 this is the progression of the shroud to what it is now (raw form B4 its trimmed out)
http://www.cardomain.com/ride/752140/12 this is the progression of the shroud to what it is now (raw form B4 its trimmed out)
#14
Originally Posted by NisMoN00B
Looking at the cardomain site, it seems like it's almost a requirement to have an aftermarket intake to get this mounted? For those with stock intakes, is this still viable?
#17
Originally Posted by MaxBoost925
Werd Chris. 6th Element Engineering is back and better than ever!
Hey Joe, I thought you were gonna stop modding the maxima and sell it?
Hey Joe, I thought you were gonna stop modding the maxima and sell it?
damn right, couldnt give it up,...its my drug of choice
Thread
Thread Starter
Forum
Replies
Last Post
Lilchikcadee
7th Generation Maxima (2009-2015)
9
05-01-2019 08:49 AM
TonyJr
3rd Generation Maxima (1989-1994)
4
08-20-2015 12:14 AM