hot shot headers , megan test pipe, ebay catback..pics +video
#1
hot shot headers , megan test pipe, ebay catback..pics +video
Hotshot headers
megan test pipe
ebay catback
*magnaflow resonator and muffler (not installed yet)
The install was a pain. Hands are pritty cut up . Took me all day to do everything, and had the help of a friend for half the time.
My front o2 sensor is touching the ac compresser, i just left it, any one else have this prob, what did u do?
I also dont have my rear 02 sensor hooked up to anything.
But i love it. Will be installing a magnaflow muffler and resontor onto the cat back this week, and will be re-tunning the safc for the exhaust setup itself.
Its alil loud, not to bad under 2.5k. WOT its crazzzzzy. Sounds like ive got about 500 hp..hehe.
Ill be posting up the dyno later this week, and will be posting more vids (got a few friends with g35s that are talkin trash so i gotta take care of it....)
megan test pipe
ebay catback
*magnaflow resonator and muffler (not installed yet)
The install was a pain. Hands are pritty cut up . Took me all day to do everything, and had the help of a friend for half the time.
My front o2 sensor is touching the ac compresser, i just left it, any one else have this prob, what did u do?
I also dont have my rear 02 sensor hooked up to anything.
But i love it. Will be installing a magnaflow muffler and resontor onto the cat back this week, and will be re-tunning the safc for the exhaust setup itself.
Its alil loud, not to bad under 2.5k. WOT its crazzzzzy. Sounds like ive got about 500 hp..hehe.
Ill be posting up the dyno later this week, and will be posting more vids (got a few friends with g35s that are talkin trash so i gotta take care of it....)
#3
Originally Posted by maxspeed96CT
Hotshot headers
megan test pipe
ebay catback
*magnaflow resonator and muffler (not installed yet)
The install was a pain. Hands are pritty cut up . Took me all day to do everything, and had the help of a friend for half the time.
My front o2 sensor is touching the ac compresser, i just left it, any one else have this prob, what did u do?
I also dont have my rear 02 sensor hooked up to anything.
megan test pipe
ebay catback
*magnaflow resonator and muffler (not installed yet)
The install was a pain. Hands are pritty cut up . Took me all day to do everything, and had the help of a friend for half the time.
My front o2 sensor is touching the ac compresser, i just left it, any one else have this prob, what did u do?
I also dont have my rear 02 sensor hooked up to anything.
#5
very nice! ya my hands were all cut up too after my install. It gives you a good sense of gratitude though when ur finished. Im still confused on one thing though...when u say your rear o2 sensor isnt hooked up to anything are you talkin about ur rear header primary o2 sensor or the secondaries that were originally on the precats?
#7
Originally Posted by huffdaddy2008
very nice! ya my hands were all cut up too after my install. It gives you a good sense of gratitude though when ur finished. Im still confused on one thing though...when u say your rear o2 sensor isnt hooked up to anything are you talkin about ur rear header primary o2 sensor or the secondaries that were originally on the precats?
Kick *** video btw.
#10
Originally Posted by maxspeed96CT
compresser, i just left it, any one else have this prob, what did u do?
#11
Originally Posted by d40sithui
I think hes talking about the sensor behind the Cat (FED)..this catback doesnt have the 02 bung i believe as i think i have the same one from ebay.
Kick *** video btw.
Kick *** video btw.
#12
Nice pull.
You need to connect all your sensors (even the secondaries) or else you'll get a bunch of "heater circuit/heater malfunction" codes. Also, I think the ECU will go into a pre-determined map which is pig rich, but you do have a piggyback so you can adjust that. Just hook them up and get an o2 sim for no SES.
You need to connect all your sensors (even the secondaries) or else you'll get a bunch of "heater circuit/heater malfunction" codes. Also, I think the ECU will go into a pre-determined map which is pig rich, but you do have a piggyback so you can adjust that. Just hook them up and get an o2 sim for no SES.
#13
Originally Posted by Puppetmaster
No, all 02-03s are Cali spec. He's talking about both rear O2s being left off the car, which doesn't affect anything but will give you a CEL. I did the same until I got my O2 sim.
my o2 sims should be here anyday, funny thing is i have no codes??
will if mater if I tune it without the o2 sims and then install them later??
#16
Guest
Posts: n/a
Originally Posted by n3985
OK, I am blind and cannot find the link for the exhaust clip? Is it the one in your sig to streetfire.net?
http://forums.maxima.org/showthread.php?t=407975
#25
hotshot headeers 300 shipped
megan test pipe 40 shipped
catback 200 shipped (tusdo ebay n-1 2.5") http://cgi.ebay.com/ebaymotors/ws/eB...m=320091292803
540$ total for the entire setup in the video
(sweet deal i know, im ballin on a budget)
Thats all the stuff in the pics.
I also have o2 sim coming 30$
And my magnaflow resonator was 60$
And the dual tip obx muffler was 60$
Those will be going on later this week
Total cost will end up $690.
So might as well say $700
and my tunning will be 150$ (but that optional)
here are the pics of the muffler and resonator that will be going on.
megan test pipe 40 shipped
catback 200 shipped (tusdo ebay n-1 2.5") http://cgi.ebay.com/ebaymotors/ws/eB...m=320091292803
540$ total for the entire setup in the video
(sweet deal i know, im ballin on a budget)
Thats all the stuff in the pics.
I also have o2 sim coming 30$
And my magnaflow resonator was 60$
And the dual tip obx muffler was 60$
Those will be going on later this week
Total cost will end up $690.
So might as well say $700
and my tunning will be 150$ (but that optional)
here are the pics of the muffler and resonator that will be going on.
#26
Originally Posted by HotshotVQ35
my HS went on yesterday, we have the same problem...
and to think the HS were designed for the 02-03! lol
and to think the HS were designed for the 02-03! lol
mine isnt even as bad as that, but ya thats exactly what im talking about.
Any one wanna explain why i dont have a cell and my secondary o2 sensor are laying zip tied next to my coils? lol
#28
Originally Posted by pimpin02max
Where would I get the hookup for my O2 sensors??? But like Maxspeed said I have not had any codes or problems so far (knock on wood).
Oh and my cel never came on and i drove prolly 50+ miles over a 3 day period before installing the sim (i had to find a good enough soldering iron, crappy wal mart one wouldnt get hot enough).
#29
Originally Posted by HotshotVQ35
my HS went on yesterday, we have the same problem...
and to think the HS were designed for the 02-03! lol
and to think the HS were designed for the 02-03! lol
Anyway to prevent this? and how bad is that going to be with all the vibration and what not?
#30
Originally Posted by maxima0001
#31
Originally Posted by maxima0001
Soo...where is this so-called video?
#32
here the link to the video, its near the end of the video to btw.
http://videos.streetfire.net/video/2...fc0128dc13.htm
http://videos.streetfire.net/video/2...fc0128dc13.htm
#35
the o2 is in the wrong place anyway, have a bung welded into the collector, problem solved. i will have it done soon enough.
Originally Posted by machinehead131
Anyway to prevent this? and how bad is that going to be with all the vibration and what not?
#37
Originally Posted by machinehead131
So you plug the stock hole and weld another bung in?
Yessir, thats what I did on my old HotShots. You will need to extend the wires, but it is a much better place for the sensor.
They have specific o2 sensor bung plugs BTW.
Pic of my old HS with the new bung welded on (crappy weld but it held):
#38
Originally Posted by maxspeed96CT
its close , but not quite. After 100k my rubber hangers are loose.
#40
Originally Posted by upstatemax
Yessir, thats what I did on my old HotShots. You will need to extend the wires, but it is a much better place for the sensor.
They have specific o2 sensor bung plugs BTW.
Pic of my old HS with the new bung welded on (crappy weld but it held):
They have specific o2 sensor bung plugs BTW.
Pic of my old HS with the new bung welded on (crappy weld but it held):
Wouldn't it be practical to weld the other one there or does that not matter? And which collector is the one that hits the front or the rear?