03 Altima/00Maxima Calibers
12-26-2007, 12:44 PM
#1
03 Altima/00Maxima Calibers
Will 03 Altima calipers work on a 00 Maxima?
I was at the junk yard today and i found a 03 altima, the calipers are duel pistons compared to my single ones in the 00 max, there all intact, bracks and all, and for $8 each hell.
I was at the junk yard today and i found a 03 altima, the calipers are duel pistons compared to my single ones in the 00 max, there all intact, bracks and all, and for $8 each hell.
12-26-2007, 04:54 PM
#5
Now that you mention it, it almost looked like a 6th gen max, it was so gutted though i couldent really tell, it had side curtain airbags that poped and , all i saw was the sticker under the hood, said 2003 year but i did not note the engine size, it was gone anyways, but the calibers where deffinetly 2 pistons on the inner side.Ill get pics on friday if the weather is ok and ill buy them just to have with the bracket, if they dont work, ill sell them here i guess, ill pass on the savings ^_^
Last edited by Professor; 12-26-2007 at 05:01 PM. Reason: n
12-26-2007, 05:05 PM
#7
12-26-2007, 05:05 PM
#8
Now that you mention it, it almost looked like a 6th gen max, it was so gutted though i couldent really tell, it had side curtain airbags that poped and , all i saw was the sticker under the hood, said 2003 year but i did not note the engine size, it was gone anyways, but the calibers where deffinetly 2 pistons on the inner side.Ill get pics on friday if the weather is ok and ill buy them just to have with the bracket, if they dont work, ill sell them here i guess, ill pass on the savings ^_^
so i guess pics of the whole car along with the calipers are in order..
12-26-2007, 05:07 PM
#9
Guest
Posts: n/a
are you sure it's 03, cause those didn't use 2-pist. calipers. as for fitment.. you would defntly want to get 03 altima rotors (that go with those calipers) wich are 11.65"x1.02" vs. 11.02"x1.02" on 00 maxima. meaning.. calipers are going to bolt on, but the pads with stock 00 rotors are going to have 0.315" overhang.
12-26-2007, 05:42 PM
#10
for the brakes......... alot of old datsun 200sxs, stanza's 4th and older gen maximas.....old z's but nothing i was looking for
12-26-2007, 09:32 PM
#13
Nope it was EZ Pull in new ringold , i havent looked at harrys yet, maybe next week ill drive up, its like a 25 min drive from here.
12-28-2007, 07:03 AM
#14
OK, iam going to that yard in about 10 mins, I got my camera, ill take pics so you can see, also iam gona check 2 other yards, its sunny and clear in the 40's so its a good yard day ^______________^
12-28-2007, 05:52 PM
#18
Well i went to the yard, Its freaking gone, they shredded the remains........................................... ..... anywho, I found a black 5th gen max gle, it had major damage, the driver door was peeled off, the roof caved in, windshield gone, someone raped the engine and tranny already, i managed to get the window motor for the drivers rear wich i needed so bad, $13 woot, it looks as if it had a head on and rear on hit and rolled, cluster is still there, pass airbag good, grey interior vert messy, i got what i needed from it.
Anyways heres a pic of the junkyard you requested, i made a link because its a huge pic<panoramic>
http://i122.photobucket.com/albums/o...rdBIGcopy1.jpg
Anyways heres a pic of the junkyard you requested, i made a link because its a huge pic<panoramic>
http://i122.photobucket.com/albums/o...rdBIGcopy1.jpg
Last edited by Professor; 12-28-2007 at 08:20 PM.
Thread
Thread Starter
Forum
Replies
Last Post