Hi, I was wanting to purchase a pair of those windshield nozzle led lights and was wondering if anybody else has these.
Are they easy to install, what wires do you hook them up to. Do they look nice or are they cheesey looking. Any info would be appreciated,

 

Oh, yeah. There was this other member that installed those on his ride. They looked phat!

In fact, some guy walked up to him on the street to tell him how much he liked them. The problem was that he carried a badge and a gun. He liked them so much he gave him 6 tickets!

http://forums.maxima.org/showthread....ight=blue+leds

 

 

'sport' trucks around here and they look like crap. I thought Altrezzas and undercar neon was pre-teen tacky!! The whole package together screams of underage ghetto!

 

http://forums.maxima.org/showthread.php?threadid=78875

 

They're illegal in California , I believe.

 

They weren't that hard to install. The hardest part is getting the first nozzle out. Since they are recessed it is hard to see what you are grabing with the needle nose pilars. Once you get the first one, the second nozzle is a piece of cake (since you know what to do). Then I wired them to the blinkers (the green wire connected to the corner lights.) Just take apart the parking light harness and you will see three slots, one for the red wire, one for the black wire and one for the green wire. To wire them to the blinker, just stick the red wire from the LEDs into the slot of the green wire on the harness. Then just hook up the black wire (the ground) to any screw on the body. To wire them with the headlights, just put the red wire from the LEDs into the red wire slot on the parking light harness, and then hook up the ground wire. Hope that helps.

 

I thought only the blue and red LED's were illegal at least they are here in Texas