Flip-key fob thread
#42
Question.....So if I grab one of these off ebay, I can just take it to the dealer and have the blank key thats on there and have it cut? My friend told me that they cut your original key off and somehow drill a hole through it and use that on it......doesnt sound right....
#44
Question.....So if I grab one of these off ebay, I can just take it to the dealer and have the blank key thats on there and have it cut? My friend told me that they cut your original key off and somehow drill a hole through it and use that on it......doesnt sound right....
yes-they cost more but yes, they're available.
#45
#47
Quote:
yes it will work(get the one for the 00/01)...not sure what window feature you're referring to though
-I'm not sure but I believe its the unlock button you hold down on the 5.5's and it rolls down the windows...
yes it will work(get the one for the 00/01)...not sure what window feature you're referring to though
-I'm not sure but I believe its the unlock button you hold down on the 5.5's and it rolls down the windows...
#50
So, the handle off my OEM key broke. I went on eBay and I bought a new Transponder Nissan Key but now, I heard that it's going to be expensive to get it made because it has to be programmed to the computer or some BS, is this true? If so, any estimates of how much this little scheme is worth? Thanks =)
#51
Supporting Maxima.org Member
Thread Starter
iTrader: (18)
Join Date: Oct 2005
Location: Austin, Tx
Posts: 1,151
The handle broke? Like the part that clips to the keychain? What kind of key did you buy? I'm not sure how the '00-'01 keys look, but I bought a flip-key that had the same 4-button layout as my oem fob so that I was able to move the circuit board from the old fob to the new one and it worked perfectly with no need to reprogram.
#52
Like the part that clips to the keychain?
Yeah, that part. It's very annoying and ghetto that I have to tape the key to my keychain so I won't lose my key.
This is the Uncut key I bought from eBay for about $13
and, here's the OEM Nissan key
Yeah, that part. It's very annoying and ghetto that I have to tape the key to my keychain so I won't lose my key.
This is the Uncut key I bought from eBay for about $13
and, here's the OEM Nissan key
#54
So, the handle off my OEM key broke. I went on eBay and I bought a new Transponder Nissan Key but now, I heard that it's going to be expensive to get it made because it has to be programmed to the computer or some BS, is this true? If so, any estimates of how much this little scheme is worth? Thanks =)
I believe they have to program the key to the car which is where all the extra cost comes in. Both keys have a little blue chip towards the bottom of the black part of the key. I'm assuming this is the "chip" for the key. If I were to get one of these flip keys would the "chip" from the dealer keys have to be swapped over or would just the internals from the fob need to switched?
#57
http://cgi.ebay.com/ebaymotors/02-03...Q5fAccessories
do you guys know if i would be able to use this for a 95 maxima? the 95 maxima doesnt have a chip in it so would i be able to program the lock/unlock/trunk/panic?
do you guys know if i would be able to use this for a 95 maxima? the 95 maxima doesnt have a chip in it so would i be able to program the lock/unlock/trunk/panic?
#58
#59
#60
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Bought this, and thought I'd share. $12.95 shipped, took a week or two to arrive, but well worth it.
- Swapped over keyfob buttons and battery housing (remember the back plate)
- Got key blank cut at Home Depot for free. If they are unsure of what cartridge to use, have them find out based on their Nissan blanks.
- Cut existing key open and installed chip into new housing.
BAM.
Bought this, and thought I'd share. $12.95 shipped, took a week or two to arrive, but well worth it.
- Swapped over keyfob buttons and battery housing (remember the back plate)
- Got key blank cut at Home Depot for free. If they are unsure of what cartridge to use, have them find out based on their Nissan blanks.
- Cut existing key open and installed chip into new housing.
BAM.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
mkaresh
8th Generation Maxima (2016-)
21
03-12-2018 06:48 PM