5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Seafoamed My Car (Video and Questions)

Thread Tools
 
Search this Thread
 
Old 07-22-2010, 06:07 PM
  #1  
Senior Member
Thread Starter
iTrader: (1)
 
jowo9's Avatar
 
Join Date: Nov 2008
Location: Alberta, Canada
Posts: 1,022
Seafoamed My Car (Video and Questions)

Ok, so some of you may have seen this thread that I started last night:
http://forums.maxima.org/showthread....31#post7656131
This is what happened after I seafoamed my car and took her for a spin. I just have a concern or two about the video and another issue:

1. If you watch the video, at 0:36 seconds, there is a loud "pop" sound and some air shoots out the exhaust. Is this normal? It's never happened before when revving in neutral... I've had a similar (but less extreme) pop sound when I'm driving about 60mph downhill and let off the gas completely. I assume this is just part of having headers and a 3" exhaust? Could the MAF gradually going bad cause this in any way?
2. Also, I've had a slight raspy sound that sounds like it's coming from directly under the head unit area (like around the flex section of the y-pipe or maybe further forward, IDK). It only happens under load and acceleration (part throttle) around 2000-3800rpms... It seems it has gotten worse over the last 2 days until my MAF crapped out. Could this sound be an engine "ping" that I just hear through my headers/exhaust or is it just exhaust noise? Can a bad MAF cause engine ping? I just thought that this sound was normal with my setup... I only noticed it after my headers/3" cat-back install... but maybe it was engine pinging all along and not exhaust noise? Please help me out if you can! Thanks.

Last edited by jowo9; 07-22-2010 at 06:13 PM.
jowo9 is offline  
Old 07-22-2010, 07:30 PM
  #2  
Senior Member
iTrader: (2)
 
jasonmax's Avatar
 
Join Date: Sep 2007
Location: Omaha, NE
Posts: 1,646
the popping is pretty normal if you dont have a cat its backfiring.
I drive a rotary engine it pops all the time.
jasonmax is offline  
Old 07-22-2010, 07:35 PM
  #3  
Senior Member
iTrader: (22)
 
Grand_hustle17's Avatar
 
Join Date: Dec 2006
Posts: 7,827
yea, cattman exhausts always had crazy backfires lol, at first it seemed like your car was sputtering but i guess that was because of the seafoam but its all seemed fine at the end

http://www.youtube.com/watch?v=n-YzUorpX-g
Grand_hustle17 is offline  
Old 07-22-2010, 07:36 PM
  #4  
Senior Member
iTrader: (22)
 
Grand_hustle17's Avatar
 
Join Date: Dec 2006
Posts: 7,827
Originally Posted by jasonmax
the popping is pretty normal if you dont have a cat its backfiring.
I drive a rotary engine it pops all the time.
i got a buddy with an RX8 (or he did have it til he blew the motor) anyways, he could be in second at regular driving speeds and it would shoot flames, he was named "yoga flame"
Grand_hustle17 is offline  
Old 07-22-2010, 07:45 PM
  #5  
Senior Member
Thread Starter
iTrader: (1)
 
jowo9's Avatar
 
Join Date: Nov 2008
Location: Alberta, Canada
Posts: 1,022
Good to know about the popping. Yeah, it was sputtering at the beginning due to the seafoam... anyone have any comments on my other concern? (the rasp noise)
jowo9 is offline  
Old 07-22-2010, 08:00 PM
  #6  
Senior Member
iTrader: (22)
 
Grand_hustle17's Avatar
 
Join Date: Dec 2006
Posts: 7,827
Originally Posted by jowo9
Good to know about the popping. Yeah, it was sputtering at the beginning due to the seafoam... anyone have any comments on my other concern? (the rasp noise)
Yea I heard the rasp, I don't think it was that bad to be honest but I guess you can change from a test pipe to a high flow cat or a cattman fastcat... I say leave it to be honest
Grand_hustle17 is offline  
Old 07-22-2010, 08:22 PM
  #7  
Senior Member
Thread Starter
iTrader: (1)
 
jowo9's Avatar
 
Join Date: Nov 2008
Location: Alberta, Canada
Posts: 1,022
Originally Posted by Grand_hustle17
Yea I heard the rasp, I don't think it was that bad to be honest but I guess you can change from a test pipe to a high flow cat or a cattman fastcat... I say leave it to be honest
I have a Cattman Fastcat. I just wanted to make sure the rasp (when under load and acceleration) between about 2000 and 3800 rpms is not engine pinging. I THINK it's just exhaust noise, but I want to be sure.
jowo9 is offline  
Old 07-23-2010, 10:20 AM
  #8  
Cletus
iTrader: (5)
 
SoonerFan's Avatar
 
Join Date: Sep 2003
Location: OKC, OK
Posts: 23,676
you couldnt have posted this in the thread you already started about this problem? you needed two threads?
SoonerFan is offline  
Old 07-23-2010, 10:26 AM
  #9  
Senior Member
Thread Starter
iTrader: (1)
 
jowo9's Avatar
 
Join Date: Nov 2008
Location: Alberta, Canada
Posts: 1,022
Originally Posted by SoonerFan
you couldnt have posted this in the thread you already started about this problem? you needed two threads?
Yeah yeah, i thought of that after I'd done it already. Sorry sooner, I know how much you hate things like this
jowo9 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
mikekay
7th Generation Maxima (2009-2015)
0
08-10-2015 12:52 PM
spidgeon
8th Generation Maxima (2016-)
9
08-09-2015 09:26 AM
13Maximasv
5th Generation Maxima (2000-2003)
0
08-07-2015 10:56 AM
Jcof88
7th Generation Maxima (2009-2015)
0
08-03-2015 10:43 PM



Quick Reply: Seafoamed My Car (Video and Questions)



All times are GMT -7. The time now is 05:00 PM.